Re: [PATCH 5/6] tty: serial: Add linflexuart driver for S32V234

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Aug 08, 2019 at 12:47:00PM +0000, Stefan-gabriel Mirea wrote:
> On 8/8/2019 11:08 AM, Will Deacon wrote:
> > On Fri, Aug 02, 2019 at 07:47:23PM +0000, Stefan-gabriel Mirea wrote:
> >> +             linflex,<addr>
> >> +                     Use early console provided by Freescale LinFlex UART
> >> +                     serial driver for NXP S32V234 SoCs. A valid base
> >> +                     address must be provided, and the serial port must
> >> +                     already be setup and configured.
> > 
> > Why isn't earlycon= sufficient for this?
> 
> "earlycon=" is not actually supported. I will fix this in the next
> version by adding a /chosen/stdout-path to the dts. The compatible
> string provided to OF_EARLYCON_DECLARE will also be changed from
> "fsl,s32v234-linflexuart" to "fsl,s32-linflexuart" to match the one in
> the device tree nodes. I missed this after importing a rename from our
> codebase.
> 
> Should I remove this addition from kernel-parameters.txt after that?

Yes, if you can use earlycon instead, then you can drop your custom option
entirely and therefore there's no need to document it either.

Will



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux