[PATCH v2 09/23] tty: serial: fsl_lpuart: Drop no-op bit opearation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The check for termios->c_cflag & CRTSCTS ensure that if we reach else
branch, CRTSCTS in termios->c_cflag is already going to be
cleard. Doing so explicitly there is not necessary. Drop it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Cc: Stefan Agner <stefan@xxxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Cory Tusar <cory.tusar@xxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Jiri Slaby <jslaby@xxxxxxxx>
Cc: linux-imx@xxxxxxx
Cc: linux-serial@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
 drivers/tty/serial/fsl_lpuart.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index ed6d3f836c93..b3cc44548b34 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1650,12 +1650,10 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (sport->port.rs485.flags & SER_RS485_ENABLED)
 		termios->c_cflag &= ~CRTSCTS;
 
-	if (termios->c_cflag & CRTSCTS) {
+	if (termios->c_cflag & CRTSCTS)
 		modem |= (UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
-	} else {
-		termios->c_cflag &= ~CRTSCTS;
+	else
 		modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
-	}
 
 	if (termios->c_cflag & CSTOPB)
 		termios->c_cflag &= ~CSTOPB;
-- 
2.21.0




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux