RE: [PATCH 1/2] serial: 8250_pci: Add support for Sunix serial boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tested-by: Debbie Liu  <debbie_liu@xxxxxxxxx>

Nice day,
Debbie Liu / Sunix WW Sales Dept.
Tel :+886-2-8913-1987 ext.2769 

-----Original Message-----
From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> 
Sent: Friday, August 09, 2019 2:40 AM
To: gregkh@xxxxxxxxxxxxxxxxxxx; sudipm.mukherjee@xxxxxxxxx
Cc: linux-serial@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>; Morris Ku 古文俊 <morris_ku@xxxxxxxxx>; Debbie Liu 劉淑華 <debbie_liu@xxxxxxxxx>
Subject: [PATCH 1/2] serial: 8250_pci: Add support for Sunix serial boards

Add support to Sunix serial boards with up to 16 ports.

Sunix board need its own setup callback instead of using Timedia's, to properly support more than 4 ports.

Cc: Morris Ku <morris_ku@xxxxxxxxx>
Cc: Debbie Liu <debbie_liu@xxxxxxxxx>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_pci.c  | 93 +++++++++++++++++++++++------  drivers/tty/serial/8250/8250_port.c |  8 +++
 include/uapi/linux/serial_core.h    |  3 +
 3 files changed, 87 insertions(+), 17 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 7f740b37700b..57df7d994d8c 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1692,6 +1692,30 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, port, idx);  }
 
+static int
+pci_sunix_setup(struct serial_private *priv,
+		const struct pciserial_board *board,
+		struct uart_8250_port *port, int idx) {
+	int bar;
+	int offset;
+
+	port->port.flags |= UPF_FIXED_TYPE;
+	port->port.type = PORT_SUNIX;
+
+	if (idx < 4) {
+		bar = 0;
+		offset = idx * board->uart_offset;
+	} else {
+		bar = 1;
+		idx -= 4;
+		offset = do_div(idx, 4);
+		offset = idx * 64 + offset * board->uart_offset;
+	}
+
+	return setup_port(priv, port, bar, offset, 0); }
+
 #define PCI_VENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_SUBVENDOR_ID_SBSMODULARIO	0x124B
 #define PCI_DEVICE_ID_OCTPRO		0x0001
@@ -2289,21 +2313,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.setup		= pci_timedia_setup,
 	},
 	/*
-	 * SUNIX (Timedia) cards
-	 * Do not "probe" for these cards as there is at least one combination
-	 * card that should be handled by parport_pc that doesn't match the
-	 * rule in pci_timedia_probe.
-	 * It is part number is MIO5079A but its subdevice ID is 0x0102.
-	 * There are some boards with part number SER5037AL that report
-	 * subdevice ID 0x0002.
+	 * Sunix PCI serial boards
 	 */
 	{
 		.vendor		= PCI_VENDOR_ID_SUNIX,
 		.device		= PCI_DEVICE_ID_SUNIX_1999,
 		.subvendor	= PCI_VENDOR_ID_SUNIX,
 		.subdevice	= PCI_ANY_ID,
-		.init		= pci_timedia_init,
-		.setup		= pci_timedia_setup,
+		.setup		= pci_sunix_setup,
 	},
 	/*
 	 * Xircom cards
@@ -2757,6 +2774,11 @@ enum pci_board_num_t {
 	pbn_pericom_PI7C9X7952,
 	pbn_pericom_PI7C9X7954,
 	pbn_pericom_PI7C9X7958,
+	pbn_sunix_pci_1s,
+	pbn_sunix_pci_2s,
+	pbn_sunix_pci_4s,
+	pbn_sunix_pci_8s,
+	pbn_sunix_pci_16s,
 };
 
 /*
@@ -3494,6 +3516,31 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud      = 921600,
 		.uart_offset	= 0x8,
 	},
+	[pbn_sunix_pci_1s] = {
+		.num_ports	= 1,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_2s] = {
+		.num_ports	= 2,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_4s] = {
+		.num_ports	= 4,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_8s] = {
+		.num_ports	= 8,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
+	[pbn_sunix_pci_16s] = {
+		.num_ports	= 16,
+		.base_baud      = 921600,
+		.uart_offset	= 0x8,
+	},
 };
 
 static const struct pci_device_id blacklist[] = { @@ -4532,17 +4579,29 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		pbn_b0_bt_1_921600 },
 
 	/*
-	 * SUNIX (TIMEDIA)
+	 * Sunix PCI serial boards
 	 */
 	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
-		PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
-		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00,
-		pbn_b0_bt_1_921600 },
-
+		PCI_VENDOR_ID_SUNIX, 0x0001, 0, 0,
+		pbn_sunix_pci_1s },
 	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
-		PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
-		PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
-		pbn_b0_bt_1_921600 },
+		PCI_VENDOR_ID_SUNIX, 0x0002, 0, 0,
+		pbn_sunix_pci_2s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0004, 0, 0,
+		pbn_sunix_pci_4s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0084, 0, 0,
+		pbn_sunix_pci_4s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0008, 0, 0,
+		pbn_sunix_pci_8s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0088, 0, 0,
+		pbn_sunix_pci_8s },
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, 0x0010, 0, 0,
+		pbn_sunix_pci_16s },
 
 	/*
 	 * AFAVLAB serial card, from Harald Welte <laforge@xxxxxxxxxxxx> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index c1cec808571b..8900112ed232 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -308,6 +308,14 @@ static const struct serial8250_config uart_config[] = {
 		.rxtrig_bytes	= {1, 4, 8, 14},
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_SUNIX] = {
+		.name		= "Sunix",
+		.fifo_size	= 128,
+		.tx_loadsz	= 128,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 32, 64, 112},
+		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP,
+	},
 };
 
 /* Uart divisor latch read */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 3cc3af1c2ee1..055626ca0a40 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -290,4 +290,7 @@
 /* SiFive UART */
 #define PORT_SIFIVE_V0	120
 
+/* Sunix UART */
+#define PORT_SUNIX	121
+
 #endif /* _UAPILINUX_SERIAL_CORE_H */
--
2.17.1





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux