On Wed, Aug 14, 2019 at 11:29:23AM +0200, Geert Uytterhoeven wrote:
> Since commit 1d267ea6539f2663 ("serial: mctrl-gpio: simplify init
> routine"), mctrl_gpio_init() returns failure if the assignment to any
> member of the gpio array results in an error pointer.
> Since commit c359522194593815 ("serial: mctrl_gpio: Avoid probe failures
> in case of missing gpiolib"), mctrl_gpio_to_gpiod() returns NULL in the
> !CONFIG_GPIOLIB case.
> Hence there is no longer a need to check for mctrl_gpio_to_gpiod()
> returning an error value. A simple NULL check is sufficient.
>
> This follows the spirit of commit 445df7ff3fd1a0a9 ("serial: mctrl-gpio:
> drop usages of IS_ERR_OR_NULL") in the mctrl-gpio core.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> ---
> drivers/tty/serial/mxs-auart.c | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
> index 4c188f4079b3ea68..e3452597068292f9 100644
> --- a/drivers/tty/serial/mxs-auart.c
> +++ b/drivers/tty/serial/mxs-auart.c
> @@ -969,10 +969,8 @@ static int mxs_auart_dma_init(struct mxs_auart_port *s)
>
> }
>
> -#define RTS_AT_AUART() IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(s->gpios, \
> - UART_GPIO_RTS))
> -#define CTS_AT_AUART() IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(s->gpios, \
> - UART_GPIO_CTS))
> +#define RTS_AT_AUART() !mctrl_gpio_to_gpiod(s->gpios, UART_GPIO_RTS)
> +#define CTS_AT_AUART() !mctrl_gpio_to_gpiod(s->gpios, UART_GPIO_CTS)
> static void mxs_auart_settermios(struct uart_port *u,
> struct ktermios *termios,
> struct ktermios *old)
> --
> 2.17.1
>
