[PATCH] tty: serial: msm_serial: avoid system lockup condition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The function msm_wait_for_xmitr can be taken with interrupts
disabled. In order to avoid a potential system lockup - demonstrated
under stress testing conditions on SoC QCS404/5 - make sure we wait
for a bounded amount of time.

Tested on SoC QCS404.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
---
 drivers/tty/serial/msm_serial.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 23833ad952ba..0d4f1fe2b3a2 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -383,10 +383,14 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
 
 static inline void msm_wait_for_xmitr(struct uart_port *port)
 {
+	unsigned int timeout = 500000;
+
 	while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
 		if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
 			break;
 		udelay(1);
+		if (timeout--)
+			break;
 	}
 	msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
 }
-- 
2.21.0




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux