Re: [PATCH v4 1/3] serial: imx: set_termios(): do not enable autoRTS if RTS is unset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 19, 2019 at 06:13:52PM +0300, Sergey Organov wrote:
> Hello Uwe,
> 
> Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> writes:
> > Hello Sergey,
> >
> > On Fri, Jul 19, 2019 at 03:18:13PM +0300, Sergey Organov wrote:
> >> Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> writes:
> >> > On Fri, Jul 19, 2019 at 11:47:52AM +0300, Sergey Organov wrote:
> >> >> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> >> >> index 57d6e6b..95d7984 100644
> >> >> --- a/drivers/tty/serial/imx.c
> >> >> +++ b/drivers/tty/serial/imx.c
> >> >> @@ -405,7 +405,8 @@ static void imx_uart_rts_inactive(struct imx_port *sport, u32 *ucr2)
> >> >>  /* called with port.lock taken and irqs caller dependent */
> >> >>  static void imx_uart_rts_auto(struct imx_port *sport, u32 *ucr2)
> >> >>  {
> >> >> -	*ucr2 |= UCR2_CTSC;
> >> >> +	if (*ucr2 & UCR2_CTS)
> >> >> +		*ucr2 |= UCR2_CTSC;
> >> >
> >> > I think this patch is wrong or the commit log is insufficient.
> >> > imx_uart_rts_auto() has only a single caller and there ucr2 & UCR2_CTS is
> >> > never true. And CTSC isn't restored anywhere, is it?
> >> 
> >> This is rebase to 'tty-next' branch, and you need to look at it in that
> >> context. There, ucr2 & UCR2_CTS does already make sense, due to previous
> >> fix that is already there.
> >
> > I looked at 57d6e6b which is the file you patched. And there
> > imx_uart_rts_auto is only ever called with *ucr2 not having UCR2_CTS.
> >
> > If you still think I'm wrong, please improve the commit log
> > accordingly.
> 
> I still think you are wrong, but I don't know how to improve commit log.
> 
> To check it once again, I just did:
> 
> $ git show 57d6e6b > imx.c
> 
> There, in imx_uart_set_termios(), I see:
> 
> 1569:	old_ucr2 = imx_uart_readl(sport, UCR2);
> 1570:	ucr2 = old_ucr2 & (UCR2_TXEN | UCR2_RXEN | UCR2_ATEN | UCR2_CTS);
> 
> Here, current UCR2 value is read into 'old_ucr2' and then its /current/
> UCR2_CTS bit is copied into 'ucr2' (along with 3 other bits).
> 
> Then, later in the same function:
> 
> 1591:		imx_uart_rts_auto(sport, &ucr2);
> 
> is called that can check /current/ state of UCR2_CTS bit in '*ucr2'.
> 
> That's what the patch does, checks this bit.
> 
> Sorry, I fail to see how you came to conclusion that "*ucr2 not having
> UCR2_CTS". Do we maybe still read different versions of the file?

No, it's just that I failed to see that UCR2_CTS is in the set of bits
that are retained even when looking twice :-|

So you convinced me that you are right and if you update the commit log
as agreed already before and even add a comment in imx_uart_rts_auto
along the lines of

	/*
	 * Only let the receiver control RTS output if we were not
	 * requested to have RTS inactive (which then should take
	 * precedence).
	 */

you can have my Ack.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux