Linux Renesas SOC

• Thread Index

• [PATCH v2 07/11] clk: renesas: rcar-gen3: Add support for RCKSEL clock selection
  • From: Geert Uytterhoeven
• [PATCH v2 08/11] clk: renesas: r8a77990: Correct RCLK handling
  • From: Geert Uytterhoeven
• [PATCH v2 05/11] clk: renesas: r8a77980: Add OSC predivider configuration and clock
  • From: Geert Uytterhoeven
• [PATCH v2 06/11] clk: renesas: cpg-mssr: Add support for fixed rate clocks
  • From: Geert Uytterhoeven
• [PATCH v2 10/11] clk: renesas: rcar-gen3: Add support for mode pin clock selection
  • From: Geert Uytterhoeven
• [PATCH v2 00/11] clk: renesas: rcar-gen3: OSC and RCLK improvements
  • From: Geert Uytterhoeven
• [PATCH v2 04/11] clk: renesas: r8a77965: Add OSC EXTAL predivider configuration
  • From: Geert Uytterhoeven
• [PATCH v2 11/11] clk: renesas: r8a77980: Add RCLK for watchdog timer
  • From: Geert Uytterhoeven
• [PATCH] clk: renesas: rcar-gen3: Rename rint to .r
  • From: Geert Uytterhoeven
• Re: [PATCH 01/11] media: soc_camera_platform: convert to SPDX identifiers
  • From: Laurent Pinchart
• Re: [PATCH v5 0/2] R-Car DU: Convert DT to new DU and LVDS bindings
  • From: Simon Horman
• Re: [PATCH v2 1/3] ARM: shmobile: Add basic RZ/A2 SoC support
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support
  • From: Simon Horman
• Re: [PATCH] pinctrl: sh-pfc: r8a77965: Add SATA pins, groups and functions
  • From: Simon Horman
• Re: [PATCH 0/2] arm64: dts: enable SATA on Gen3 boards
  • From: Simon Horman
• Re: [PATCH] ata: sata_rcar: Add r8a77965 support
  • From: Simon Horman
• Re: [PATCH] clk: renesas: r8a77965: Add SATA clock
  • From: Simon Horman
• Re: [PATCH 0/3] RZ/G2M SoC identification support
  • From: Simon Horman
• Re: [PATCH 00/11] convert to SPDX identifiers
  • From: Simon Horman
• Re: [PATCH] ASoC: rsnd: Document R-Car M3-N support
  • From: Simon Horman
• Re: [PATCH] iommu/ipmmu-vmsa: Clarify supported platforms
  • From: Simon Horman
• RE: [PATCH v2 0/3] serial: sh-sci: Add support for RZ/A2
  • From: Chris Brandt
• Re: [PATCH v5 0/2] R-Car DU: Convert DT to new DU and LVDS bindings
  • From: Simon Horman
• Re: [PATCH v2 0/3] serial: sh-sci: Add support for RZ/A2
  • From: Geert Uytterhoeven
• Re: [PATCH v5 0/2] R-Car DU: Convert DT to new DU and LVDS bindings
  • From: Laurent Pinchart
• RE: [PATCH v2 2/3] soc: renesas: identify RZ/A2
  • From: Chris Brandt
• Re: [PATCH v2 1/3] serial: sh-sci: Allow for compressed SCIF address space
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support
  • From: Geert Uytterhoeven
• Re: [PATCH] pinctrl: sh-pfc: r8a77965: Add SATA pins, groups and functions
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] arm64: dts: r8a77965: salvator-xs: enable SATA
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] arm64: dts: r8a7795: salvator-xs: enable SATA
  • From: Geert Uytterhoeven
• RE: [PATCH v2 0/3] serial: sh-sci: Add support for RZ/A2
  • From: Chris Brandt
• Re: [PATCH] arm64: dts: r8a77965: Add SATA controller node
  • From: Geert Uytterhoeven
• RE: [PATCH v2 3/3] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• RE: [PATCH v2 2/3] serial: sh-sci: Add support for separate TEI+DRI interrupts
  • From: Chris Brandt
• Re: [PATCH] ata: sata_rcar: Add r8a77965 support
  • From: Geert Uytterhoeven
• Re: [PATCH] clk: renesas: r8a77965: Add SATA clock
  • From: Geert Uytterhoeven
• RE: [PATCH v2 1/3] serial: sh-sci: Allow for compressed SCIF address space
  • From: Chris Brandt
• Re: [PATCH v2 2/3] soc: renesas: identify RZ/A2
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/3] ARM: shmobile: Add basic RZ/A2 SoC support
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] soc: renesas: Identify RZ/G2M
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] arm64: Add Renesas R8A774A1 support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] dt-bindings: arm: Document RZ/G2M SoC DT bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/3] serial: sh-sci: Add support for RZ/A2
  • From: Geert Uytterhoeven
• Re: [PATCH v2 3/3] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/3] serial: sh-sci: Add support for separate TEI+DRI interrupts
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/3] serial: sh-sci: Allow for compressed SCIF address space
  • From: Geert Uytterhoeven
• Re: [PATCH v6] usb: gadget: udc: renesas_usb3: Add register of usb role switch
  • From: Felipe Balbi
• Re: [PATCH 02/11] media: rcar-vin: convert to SPDX identifiers
  • From: "Niklas Söderlund"
• RE: [PATCH v2 3/3] dt-bindings: arm: Document RZ/A2 SoC DT bindings
  • From: Chris Brandt
• [PATCH v2 0/2] adv7180: fix format and frame interval
  • From: Niklas Söderlund
• [PATCH v2 1/2] adv7180: fix field type to V4L2_FIELD_ALTERNATE
  • From: Niklas Söderlund
• [PATCH v2 2/2] adv7180: add g_frame_interval support
  • From: Niklas Söderlund
• Re: [PATCH 1/2] mmc: tmio: rename files and CONFIG options to have the same prefix
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] mmc: tmio: rename files and CONFIG options to have the same prefix
  • From: Masahiro Yamada
• Re: [PATCH 1/2] mmc: tmio: rename files and CONFIG options to have the same prefix
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Wolfram Sang
• Re: [PATCH v4] drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  • From: Olof Johansson
• Re: [GIT PULL v2] Renesas ARM Based SoC Defconfig Updates for v4.19
  • From: Olof Johansson
• Re: [GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.19
  • From: Olof Johansson
• Re: [PATCH v2 3/3] dt-bindings: arm: Document RZ/A2 SoC DT bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 00/11] convert to SPDX identifiers
  • From: Laurent Pinchart
• Re: [PATCH 05/11] media: rcar_fdp1: convert to SPDX identifiers
  • From: Kieran Bingham
• [PATCH 1/2] mmc: tmio: rename files and CONFIG options to have the same prefix
  • From: Masahiro Yamada
• [PATCH 0/2] mmc: tmio: rename variants to have consistent prefix
  • From: Masahiro Yamada
• [PATCH 2/2] dt-binding: mmc: rename tmio_mmc.txt to renesas_sdhi.txt
  • From: Masahiro Yamada
• [PATCH 11/11] drm: shmobile: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 10/11] drm: rcar-du: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 09/11] media: sh_mobile_ceu: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 08/11] media: sh_vou: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 07/11] media: sh_veu: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 06/11] media: rcar_jpu: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 05/11] media: rcar_fdp1: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 04/11] media: rcar_drif: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 03/11] media: rcar-fcp: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 02/11] media: rcar-vin: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 01/11] media: soc_camera_platform: convert to SPDX identifiers
  • From: Kuninori Morimoto
• [PATCH 00/11] convert to SPDX identifiers
  • From: Kuninori Morimoto
• Re: [PATCH] ASoC: rsnd: Document R-Car M3-N support
  • From: Kuninori Morimoto
• Re: [PATCH 1/9] ARM: dts: porter: Add missing PMIC nodes
  • From: Marek Vasut
• Re: [PATCH V2 4/5] PCI: rcar: Support runtime PM, link state L1 handling
  • From: Marek Vasut
• [PATCH v2 3/3] dt-bindings: arm: Document RZ/A2 SoC DT bindings
  • From: Chris Brandt
• [PATCH v2 2/3] soc: renesas: identify RZ/A2
  • From: Chris Brandt
• [PATCH v2 0/3] ARM: shmobile: Add support for RZ/A2
  • From: Chris Brandt
• [PATCH v2 1/3] ARM: shmobile: Add basic RZ/A2 SoC support
  • From: Chris Brandt
• Re: [PATCH] iommu/ipmmu-vmsa: Clarify supported platforms
  • From: Laurent Pinchart
• Re: [PATCH 07/12] i2c: stu300: use core to detect 'no zero length' quirk
  • From: Linus Walleij
• [PATCH/RFT] arm64: dts: renesas: r8a77965: Add OPPs table for cpu devices
  • From: Yoshihiro Kaneko
• [PATCH] ASoC: rsnd: Document R-Car M3-N support
  • From: Yoshihiro Kaneko
• [PATCH/RFT] arm64: dts: renesas: r8a77965: Add Sound and Audio DMAC device nodes
  • From: Yoshihiro Kaneko
• Re: [PATCH] gpiolib: use better errno if get_direction is not available
  • From: Wolfram Sang
• Re: [PATCH] serial: sh-sci: Document that serial aliases became optional
  • From: Rob Herring
• [PATCH 2/2] arm64: dts: r8a77965: salvator-xs: enable SATA
  • From: Wolfram Sang
• [PATCH 1/2] arm64: dts: r8a7795: salvator-xs: enable SATA
  • From: Wolfram Sang
• [PATCH 0/2] arm64: dts: enable SATA on Gen3 boards
  • From: Wolfram Sang
• [PATCH] arm64: dts: r8a77965: Add SATA controller node
  • From: Wolfram Sang
• [PATCH] ata: sata_rcar: Add r8a77965 support
  • From: Wolfram Sang
• [PATCH] pinctrl: sh-pfc: r8a77965: Add SATA pins, groups and functions
  • From: Wolfram Sang
• [PATCH] clk: renesas: r8a77965: Add SATA clock
  • From: Wolfram Sang
• Re: [PATCH 2/2] ata: sata_rcar: Add rudimentary Runtime PM support
  • From: Wolfram Sang
• Re: [PATCH 1/2] ata: sata_rcar: Provide a short-hand for &pdev->dev
  • From: Wolfram Sang
• Re: [PATCH] DT: irqchip: renesas-irqc: document R8A77980 support
  • From: Rob Herring
• Re: [PATCH] arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support
  • From: Geert Uytterhoeven
• [PATCH] arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support
  • From: Sergei Shtylyov
• Re: [PATCH] arm64: dts: renesas: r8a77980: add RWDT support
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77980: add RWDT support
  • From: Sergei Shtylyov
• [PATCH v2 3/3] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• [PATCH v2 2/3] serial: sh-sci: Add support for separate TEI+DRI interrupts
  • From: Chris Brandt
• [PATCH v2 1/3] serial: sh-sci: Allow for compressed SCIF address space
  • From: Chris Brandt
• [PATCH v2 0/3] serial: sh-sci: Add support for RZ/A2
  • From: Chris Brandt
• [PATCH v3 4/4] hw/arm/sysbus-fdt: Add support for instantiating generic devices
  • From: Geert Uytterhoeven
• [PATCH v3 2/4] hw/arm/sysbus-fdt: Allow device matching with DT compatible value
  • From: Geert Uytterhoeven
• [PATCH v3 0/4] hw/arm/sysbus-fdt: Generic DT Pass-Through
  • From: Geert Uytterhoeven
• [PATCH v3 1/4] vfio/platform: Make the vfio-platform device non-abstract
  • From: Geert Uytterhoeven
• [PATCH v3 3/4] hw/arm/virt: Allow dynamic sysbus devices again
  • From: Geert Uytterhoeven
• [PATCH/RFC] iommu/ipmmu-vmsa: Whitelist SATA for IOMMU use and virtualization
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC] drivers/vfio: Allow type-1 IOMMU instantiation with Renesas IPMMU-VMSA
  • From: Robin Murphy
• [v2 2/2] media: i2c: Add driver for Aptina MT9V111
  • From: Jacopo Mondi
• [v2 1/2] dt-bindings: media: i2c: Document MT9V111 bindings
  • From: Jacopo Mondi
• [v2 0/2] media: i2c: mt9v111 sensor driver
  • From: Jacopo Mondi
• Re: [PATCH 1/2] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Niklas Söderlund
• [PATCH/RFC] drivers/vfio: Allow type-1 IOMMU instantiation with Renesas IPMMU-VMSA
  • From: Geert Uytterhoeven
• [PATCH v2] iommu/ipmmu-vmsa: Fix allocation in atomic context
  • From: Geert Uytterhoeven
• [PATCH] iommu/ipmmu-vmsa: Clarify supported platforms
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Wolfram Sang
• [PATCH 2/2] mmc: tmio: Fix SCC error detection
  • From: Niklas Söderlund
• [PATCH 1/2] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Niklas Söderlund
• [PATCH 0/2] mmc: {tmio,renesas_sdhi}: retune if SCC error detected
  • From: Niklas Söderlund
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• [PATCH] hw/arm/sysbus-fdt: Fix assertion in copy_properties_from_host()
  • From: Geert Uytterhoeven
• [PATCH v4] drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  • From: Sudeep Holla
• [PATCH] dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()
  • From: Yoshihiro Shimoda
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH/RFT 1/6] i2c: designware: use open drain for recovery GPIO
  • From: Phil Reid
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• Re: [PATCH 1/9] sh: defconfig: migor: Update defconfig
  • From: Mauro Carvalho Chehab
• [PATCH 3/3] soc: renesas: Identify RZ/G2M
  • From: Biju Das
• [PATCH 2/3] arm64: Add Renesas R8A774A1 support
  • From: Biju Das
• [PATCH 1/3] dt-bindings: arm: Document RZ/G2M SoC DT bindings
  • From: Biju Das
• [PATCH 0/3] RZ/G2M SoC identification support
  • From: Biju Das
• Re: [PATCH v3 3/4] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Niklas Söderlund
• [PATCH v4 2/2] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Niklas Söderlund
• [PATCH v4 1/2] mmc: tmio: Fix tuning flow
  • From: Niklas Söderlund
• [PATCH v4 0/2] mmc: {tmio,renesas_sdhi}: fix tuning behavior
  • From: Niklas Söderlund
• Re: CCREE performance on R-Car H3 + crash
  • From: Gilad Ben-Yossef
• Re: CCREE performance on R-Car H3 + crash
  • From: Gilad Ben-Yossef
• Re: [PATCH/RFT 0/7] rsnd: add support for r8a77965
  • From: Yoshihiro Kaneko
• Re: [PATCH 2/2] media: i2c: Add driver for Aptina MT9V111
  • From: Sakari Ailus
• Re: [PATCH 2/2] media: i2c: Add driver for Aptina MT9V111
  • From: jacopo mondi
• Re: [PATCH/RFT 2/6] i2c: imx: use open drain for recovery GPIO
  • From: Wolfram Sang
• Re: [PATCH 1/1] i2c: rcar: handle RXDMA HW behaviour on Gen3
  • From: Wolfram Sang
• Re: [PATCH] ARM: shmobile: defconfig: Remove SOC_CAMERA
  • From: Simon Horman
• Re: [PATCH v3 3/4] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Simon Horman
• Re: [PATCH v3 2/4] mmc: tmio: Fix SCC error detection
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77995: Attach the SYS-DMAC to the IPMMU
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: Include R-Car product name in DTSI files
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77980: add RWDT support
  • From: Simon Horman
• Re: [PATCH] ARM: dts: iwg23s-sbc: Add pinctl support for scif1
  • From: Simon Horman
• Re: [PATCH] thermal: rcar_thermal: avoid NULL dereference in absense of IRQ resources
  • From: Geert Uytterhoeven
• Re: [PATCH] ARM: dts: r8a77470: Add PFC support
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a77470: Use r8a77470-sysc binding definitions
  • From: Simon Horman
• Re: [PATCH] ARM: dts: rcar: Correct SATA device sizes to 2 MiB
  • From: Simon Horman
• Re: [PATCH v3 3/4] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Wolfram Sang
• Re: [PATCH v3 1/4] mmc: tmio: Fix tuning flow
  • From: Wolfram Sang
• Re: [PATCH v3 2/4] mmc: tmio: Fix SCC error detection
  • From: Wolfram Sang
• [PATCH] thermal: rcar_thermal: avoid NULL dereference in absense of IRQ resources
  • From: Simon Horman
• Re: [PATCH v3 2/4] mmc: tmio: Fix SCC error detection
  • From: Simon Horman
• Re: [PATCH v3 1/4] mmc: tmio: Fix tuning flow
  • From: Simon Horman
• Re: [PATCH v3 2/4] mmc: tmio: Fix SCC error detection
  • From: Wolfram Sang
• Re: [PATCH v3 1/4] mmc: tmio: Fix tuning flow
  • From: Wolfram Sang
• Re: [PATCH] mmc: renesas_sdhi: Add r8a77990 support
  • From: Wolfram Sang
• Re: CCREE performance on R-Car H3 + crash
  • From: Geert Uytterhoeven
• Re: [PATCH] mmc: renesas_sdhi: Add r8a77990 support
  • From: Wolfram Sang
• Re: CCREE performance on R-Car H3 + crash
  • From: Gilad Ben-Yossef
• Re: [PATCH/RFT 2/6] i2c: imx: use open drain for recovery GPIO
  • From: Wolfram Sang
• Re: [PATCH/RFT 1/6] i2c: designware: use open drain for recovery GPIO
  • From: Wolfram Sang
• Re: [PATCH] mmc: renesas_sdhi: Add r8a77990 support
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: r8a77980: add RWDT support
  • From: Geert Uytterhoeven
• Re: [PATCH] ARM: dts: iwg23s-sbc: Add pinctl support for scif1
  • From: Geert Uytterhoeven
• Re: [PATCH] ARM: dts: r8a77470: Add PFC support
  • From: Geert Uytterhoeven
• Re: [PATCH] ARM: dts: r8a77470: Use r8a77470-sysc binding definitions
  • From: Geert Uytterhoeven
• Re: [PATCH 5/5] sh_eth: make sh_eth_tsu_{read|write}_entry() prototypes symmetric
  • From: Geert Uytterhoeven
• Re: [PATCH 4/5] sh_eth: make sh_eth_tsu_write_entry() take 'offset' parameter
  • From: Geert Uytterhoeven
• Re: [PATCH 3/5] sh_eth: call sh_eth_tsu_get_offset() from TSU register accessors
  • From: Geert Uytterhoeven
• Re: [PATCH 2/5] sh_eth: make sh_eth_tsu_get_offset() match its name
  • From: Geert Uytterhoeven
• Re: [PATCH 1/5] sh_eth: uninline sh_eth_tsu_get_offset()
  • From: Geert Uytterhoeven
• Re: [PATCH -next] regulator: bd9571mwv: Make symbol 'dev_attr_backup_mode' static
  • From: Geert Uytterhoeven
• [PATCH -next] regulator: bd9571mwv: Make symbol 'dev_attr_backup_mode' static
  • From: Wei Yongjun
• Re: [PATCH 01/12] i2c: quirks: add zero length checks
  • From: Wolfram Sang
• Re: [PATCH 12/12] i2c: sh_mobile: use core to detect 'no zero length read' quirk
  • From: Niklas Söderlund
• Re: [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
  • From: Andy Shevchenko
• Re: [PATCH 10/12] i2c: rcar: use core to detect 'no zero length' quirk
  • From: Niklas Söderlund
• Re: [PATCH 01/12] i2c: quirks: add zero length checks
  • From: Niklas Söderlund
• [PATCH 02/12] i2c: designware-master: use core to detect 'no zero length' quirk
  • From: Wolfram Sang
• [PATCH 03/12] i2c: mxs: use core to detect 'no zero length' quirk
  • From: Wolfram Sang
• [PATCH 04/12] i2c: omap: use core to detect 'no zero length' quirk
  • From: Wolfram Sang
• [PATCH 05/12] i2c: pmcmsp: use core to detect 'no zero length' quirk
  • From: Wolfram Sang
• [PATCH 06/12] i2c: qup: use core to detect 'no zero length' quirk
  • From: Wolfram Sang
• [PATCH 07/12] i2c: stu300: use core to detect 'no zero length' quirk
  • From: Wolfram Sang
• [PATCH 10/12] i2c: rcar: use core to detect 'no zero length' quirk
  • From: Wolfram Sang
• [PATCH 12/12] i2c: sh_mobile: use core to detect 'no zero length read' quirk
  • From: Wolfram Sang
• [PATCH 11/12] i2c: xlr: use core to detect 'no zero length' quirk
  • From: Wolfram Sang
• [PATCH 08/12] i2c: tegra: use core to detect 'no zero length' quirk
  • From: Wolfram Sang
• [PATCH 09/12] i2c: zx2967: use core to detect 'no zero length' quirk
  • From: Wolfram Sang
• [PATCH 00/12] i2c: quirks: add zero length checks and update drivers
  • From: Wolfram Sang
• [PATCH 01/12] i2c: quirks: add zero length checks
  • From: Wolfram Sang
• Re: [PATCH 0/5] sh_eth: clean up the TSU register accessors
  • From: David Miller
• [PATCH 5/5] sh_eth: make sh_eth_tsu_{read|write}_entry() prototypes symmetric
  • From: Sergei Shtylyov
• [PATCH 4/5] sh_eth: make sh_eth_tsu_write_entry() take 'offset' parameter
  • From: Sergei Shtylyov
• [PATCH 3/5] sh_eth: call sh_eth_tsu_get_offset() from TSU register accessors
  • From: Sergei Shtylyov
• [PATCH 2/5] sh_eth: make sh_eth_tsu_get_offset() match its name
  • From: Sergei Shtylyov
• [PATCH 1/5] sh_eth: uninline sh_eth_tsu_get_offset()
  • From: Sergei Shtylyov
• [PATCH 0/5] sh_eth: clean up the TSU register accessors
  • From: Sergei Shtylyov
• Re: [PATCH 1/1] i2c: rcar: handle RXDMA HW behaviour on Gen3
  • From: Wolfram Sang
• Re: [PATCH 1/1] i2c: rcar: handle RXDMA HW behaviour on Gen3
  • From: Wolfram Sang
• Re: [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v4.19
  • From: Geert Uytterhoeven
• Re: [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v4.19
  • From: Olof Johansson
• Re: [PATCH/RFT 0/7] rsnd: add support for r8a77965
  • From: Simon Horman
• Re: [PATCH] mmc: renesas_sdhi: Add r8a77990 support
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77980: add RWDT support
  • From: Sergei Shtylyov
• Re: [PATCH] arm64: dts: renesas: r8a77980: add RWDT support
  • From: Simon Horman
• Re: [PATCH] ARM: dts: iwg23s-sbc: Add pinctl support for scif1
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a77470: Add PFC support
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a77470: Use r8a77470-sysc binding definitions
  • From: Simon Horman
• Re: [PATCH] ARM: dts: rcar: Correct SATA device sizes to 2 MiB
  • From: Simon Horman
• Re: [PATCH 1/2] ata: sata_rcar: Provide a short-hand for &pdev->dev
  • From: Tejun Heo
• Re: CCREE performance on R-Car H3 + crash
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] dt-bindings: media: i2c: Document MT9V111 bindings
  • From: Sakari Ailus
• Re: [PATCH 2/2] media: i2c: Add driver for Aptina MT9V111
  • From: Sakari Ailus
• Re: CCREE performance on R-Car H3 + crash
  • From: Gilad Ben-Yossef
• Re: [PATCH 2/2] media: i2c: Add driver for Aptina MT9V111
  • From: jacopo mondi
• Re: [PATCH/RFT 2/6] i2c: imx: use open drain for recovery GPIO
  • From: Lucas Stach
• Re: [PATCH/RFT 3/7] arm64: dts: renesas: r8a77965: Add Sound device node and SSI support
  • From: Yoshihiro Kaneko
• Re: [PATCH/RFT 2/7] ASoC: rsnd: Document R-Car M3-N support
  • From: Yoshihiro Kaneko
• Re: [PATCH/RFT 1/7] arm64: dts: renesas: r8a77965: Add Audio-DMAC device nodes
  • From: Yoshihiro Kaneko
• Re: [PATCH] mmc: renesas_sdhi: Add r8a77990 support
  • From: Niklas Söderlund
• [PATCH 8/8] ARM: dts: r8a77470: Use r8a77470-cpg-mssr binding definitions
  • From: Simon Horman
• [PATCH 7/8] ARM: dts: gr-peach: Add GR-Peach audiocamerashield support
  • From: Simon Horman
• [PATCH 6/8] ARM: dts: Renesas R9A06G032 SMP enable method
  • From: Simon Horman
• [PATCH 5/8] ARM: dts: Renesas RZN1D-DB Board base file
  • From: Simon Horman
• [PATCH 3/8] ARM: dts: convert to SPDX identifier for Renesas boards
  • From: Simon Horman
• [PATCH 4/8] ARM: dts: Renesas R9A06G032 base device tree file
  • From: Simon Horman
• [PATCH 1/8] ARM: dts: porter: Add missing PMIC nodes
  • From: Simon Horman
• [PATCH 2/8] ARM: dts: r8a77(43|9[013]): Add missing OPP properties for CPUs
  • From: Simon Horman
• [GIT PULL v2] Renesas ARM Based SoC DT Updates for v4.19
  • From: Simon Horman
• [PATCH 5/5] ARM: multi_v7_defconfig: Enable support for RZN1D-DB
  • From: Simon Horman
• [PATCH 4/5] ARM: shmobile: defconfig: Disable /sbin/hotplug fork-bomb
  • From: Simon Horman
• [PATCH 3/5] ARM: shmobile: defconfig: Enable support for RZN1D-DB
  • From: Simon Horman
• [PATCH 1/5] ARM: shmobile: defconfig: Drop NET_VENDOR_<FOO>=n
  • From: Simon Horman
• [PATCH 2/5] ARM: shmobile: defconfig: Enable reset controller support
  • From: Simon Horman
• [GIT PULL v2] Renesas ARM Based SoC Defconfig Updates for v4.19
  • From: Simon Horman
• Re: [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v4.19
  • From: Simon Horman
• Re: [GIT PULL] Renesas ARM Based SoC DT Updates for v4.19
  • From: Simon Horman
• Re: CCREE performance on R-Car H3 + crash
  • From: Gilad Ben-Yossef
• Re: CCREE performance on R-Car H3 + crash
  • From: Geert Uytterhoeven
• Re: [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v4.19
  • From: Geert Uytterhoeven
• Re: [PATCH 1/9] ARM: dts: porter: Add missing PMIC nodes
  • From: Geert Uytterhoeven
• Re: [PATCH] ARM: dts: rmobile: Drop MTD partitioning from DT
  • From: Olof Johansson
• Re: [PATCH 1/9] ARM: dts: porter: Add missing PMIC nodes
  • From: Marek Vasut
• Re: [PATCH] ARM: dts: rmobile: Drop MTD partitioning from DT
  • From: Marek Vasut
• Re: CCREE performance on R-Car H3
  • From: Gilad Ben-Yossef
• Re: [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v4.19
  • From: Olof Johansson
• Re: [GIT PULL] Renesas ARM64 Based SoC Defconfig Updates for v4.19
  • From: Olof Johansson
• Re: [GIT PULL] Renesas ARM Based SoC DT Bindings Updates for v4.19
  • From: Olof Johansson
• Re: [GIT PULL] Renesas ARM Based SoC DT Updates for v4.19
  • From: Olof Johansson
• Re: [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.19
  • From: Olof Johansson
• Re: [GIT PULL] Second Round of Renesas ARM Based SoC Updates for v4.19
  • From: Olof Johansson
• Re: [PATCH] ARM: dts: rmobile: Drop MTD partitioning from DT
  • From: Olof Johansson
• Re: [PATCH] ARM: dts: rmobile: Drop MTD partitioning from DT
  • From: Marek Vasut
• Re: [PATCH] ARM: dts: rmobile: Drop MTD partitioning from DT
  • From: Olof Johansson
• Re: [PATCH] ARM: dts: rmobile: Drop MTD partitioning from DT
  • From: Marek Vasut
• Re: [PATCH] ARM: dts: rmobile: Drop MTD partitioning from DT
  • From: Olof Johansson
• [PATCH] mmc: renesas_sdhi: Add r8a77990 support
  • From: Wolfram Sang
• Re: [PATCH] iommu/ipmmu-vmsa: Fix allocation in atomic context
  • From: Laurent Pinchart
• Re: [PATCH v2] i2c: recovery: make pin init look like STOP
  • From: Wolfram Sang
• Re: [PATCH] i2c: rcar: Add compatible support for r8a77990 (R-Car E3)
  • From: Wolfram Sang
• [PATCH] arm64: dts: renesas: r8a77980: add RWDT support
  • From: Sergei Shtylyov
• Re: [PATCH 1/9] ARM: dts: porter: Add missing PMIC nodes
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] dt: snps,designware-i2c: Add clock bindings documentation
  • From: Rob Herring
• Re: [PATCH v2 0/2] dmaengine: sh: rcar-dmac: Add dma_pause operation
  • From: Geert Uytterhoeven
• [PATCH] iommu/ipmmu-vmsa: Fix allocation in atomic context
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/2] dmaengine: sh: rcar-dmac: Add dma_pause operation
  • From: Vinod
• Re: [PATCH 2/2] ata: sata_rcar: Add rudimentary Runtime PM support
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] ata: sata_rcar: Provide a short-hand for &pdev->dev
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] clk: renesas: mstp: Document R7S9210 support
  • From: Rob Herring
• RE: [PATCH] clk: renesas: r9a06g032: Avoid needless probe deferring
  • From: Phil Edworthy
• [PATCH] ARM: dts: iwg23s-sbc: Add pinctl support for scif1
  • From: Biju Das
• [PATCH] ARM: dts: r8a77470: Add PFC support
  • From: Biju Das
• [PATCH] ARM: dts: r8a77470: Use r8a77470-sysc binding definitions
  • From: Biju Das
• Re: [PATCH v2 0/2] dmaengine: sh: rcar-dmac: Add dma_pause operation
  • From: Geert Uytterhoeven
• [PATCH 0/2] ata: sata_rcar: Add rudimentary Runtime PM support
  • From: Geert Uytterhoeven
• [PATCH 1/2] ata: sata_rcar: Provide a short-hand for &pdev->dev
  • From: Geert Uytterhoeven
• RE: [PATCH] clk: renesas: r9a06g032: Avoid needless probe deferring
  • From: Phil Edworthy
• Re: [PATCH] clk: renesas: r9a06g032: Avoid needless probe deferring
  • From: Geert Uytterhoeven
• [PATCH] ARM: dts: rcar: Correct SATA device sizes to 2 MiB
  • From: Geert Uytterhoeven
• [PATCH 2/2] ata: sata_rcar: Add rudimentary Runtime PM support
  • From: Geert Uytterhoeven
• [PATCH] serial: sh-sci: Document that serial aliases became optional
  • From: Geert Uytterhoeven
• [PATCH] serial: sh-sci: Drop superfluous assignment in sci_request_dma()
  • From: Geert Uytterhoeven
• Re: [PATCH] clk: renesas: r9a06g032: Avoid needless probe deferring
  • From: Geert Uytterhoeven
• RE: [PATCH] clk: renesas: r9a06g032: Avoid needless probe deferring
  • From: Phil Edworthy
• [PATCH 2/2] dt-bindings: cpu: Add Renesas R9A06G032 SMP enable method.
  • From: Simon Horman
• [PATCH 1/2] dt-bindings: arm: Document the RZN1D-DB board
  • From: Simon Horman
• [GIT PULL] Renesas ARM Based SoC DT Bindings Updates for v4.19
  • From: Simon Horman
• [PATCH 4/5] ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill
  • From: Simon Horman
• [PATCH 5/5] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Simon Horman
• [PATCH 3/5] soc: r9a06g032: don't build SMP files for non-SMP config
  • From: Simon Horman
• [PATCH 2/5] ARM: shmobile: Add the R9A06G032 SMP enabler driver
  • From: Simon Horman
• [PATCH 2/5] arm: shmobile: Add the R9A06G032 SMP enabler driver
  • From: Simon Horman
• [PATCH 1/5] ARM: shmobile: rcar-gen2: Stop compiling headsmp-apmu on !SMP
  • From: Simon Horman
• [GIT PULL] Second Round of Renesas ARM Based SoC Updates for v4.19
  • From: Simon Horman
• [PATCH 9/9] ARM: dts: r8a77470: Use r8a77470-cpg-mssr binding definitions
  • From: Simon Horman
• [PATCH 7/9] ARM: dts: Renesas R9A06G032 SMP enable method
  • From: Simon Horman
• [PATCH 8/9] ARM: dts: gr-peach: Add GR-Peach audiocamerashield support
  • From: Simon Horman
• [PATCH 6/9] ARM: dts: Renesas RZN1D-DB Board base file
  • From: Simon Horman
• [PATCH 5/9] ARM: dts: Renesas R9A06G032 base device tree file
  • From: Simon Horman
• [PATCH 4/9] ARM: dts: convert to SPDX identifier for Renesas boards
  • From: Simon Horman
• [PATCH 3/9] ARM: dts: r8a77(43|9[013]): Add missing OPP properties for CPUs
  • From: Simon Horman
• [PATCH 2/9] ARM: dts: renesas: Drop MTD partitioning from DT
  • From: Simon Horman
• [PATCH 1/9] ARM: dts: porter: Add missing PMIC nodes
  • From: Simon Horman
• [GIT PULL] Renesas ARM Based SoC DT Updates for v4.19
  • From: Simon Horman
• Re: [PATCH] iommu/ipmmu-vmsa: IMUCTRn.TTSEL needs a special usage on R-Car Gen3
  • From: Joerg Roedel
• [PATCH 7/7] ARM: multi_v7_defconfig: Enable support for RZN1D-DB
  • From: Simon Horman
• [PATCH 5/7] ARM: shmobile: defconfig: Disable /sbin/hotplug fork-bomb
  • From: Simon Horman
• [PATCH 6/7] ARM: shmobile: defconfig: Set CONFIG_LOCALVERSION
  • From: Simon Horman
• [PATCH 4/7] ARM: shmobile: defconfig: Enable support for RZN1D-DB
  • From: Simon Horman
• [PATCH 3/7] ARM: shmobile: defconfig: Enable reset controller support
  • From: Simon Horman
• [PATCH 1/7] ARM: shmobile: defconfig: Enable MTD command line partition parsing
  • From: Simon Horman
• [PATCH 2/7] ARM: shmobile: defconfig: Drop NET_VENDOR_<FOO>=n
  • From: Simon Horman
• [GIT PULL] Renesas ARM Based SoC Defconfig Updates for v4.19
  • From: Simon Horman
• [PATCH 8/9] arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
  • From: Simon Horman
• [PATCH 7/9] arm64: dts: r8a77995: Add SCIF {0, 1, 3, 4, 5} and all HSCIF device nodes
  • From: Simon Horman
• [PATCH 9/9] arm64: dts: renesas: r8a77980: add INTC-EX support
  • From: Simon Horman
• [PATCH 7/9] arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
  • From: Simon Horman
• [PATCH 6/9] arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes
  • From: Simon Horman
• [PATCH 5/9] arm64: dts: renesas: Unify the labels for RWDT
  • From: Simon Horman
• [PATCH 4/9] arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1
  • From: Simon Horman
• [PATCH 2/9] arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
  • From: Simon Horman
• [PATCH 3/9] arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder
  • From: Simon Horman
• [PATCH 1/9] arm64: dts: renesas: r8a77990: Remove non-existing STBE region
  • From: Simon Horman
• [GIT PULL] Second Round of Renesas ARM64 Based SoC DT Updates for v4.19
  • From: Simon Horman
• [PATCH 1/1] arm64: defconfig: Enable BD9571MWV regulator
  • From: Simon Horman
• [GIT PULL] Renesas ARM64 Based SoC Defconfig Updates for v4.19
  • From: Simon Horman
• Re: [RFC v2] arm64: dts: r8a7795: salvator-xs: enable SATA
  • From: Geert Uytterhoeven
• Re: [PATCH] watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Wolfram Sang
• Re: [PATCH/RFC 01/02] ravb: Do not announce 100Mbps HDX as supported
  • From: Sergei Shtylyov
• Re: [PATCH] clk: renesas: r9a06g032: Avoid needless probe deferring
  • From: Geert Uytterhoeven
• Re: [PATCH] watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Geert Uytterhoeven
• [PATCH] watchdog: renesas-wdt: Add support for the R8A77990 wdt
  • From: Wolfram Sang
• Re: [PATCH] arm64: dts: renesas: r8a77995: Attach the SYS-DMAC to the IPMMU
  • From: Geert Uytterhoeven
• Re: [PATCH] i2c: rcar: Add compatible support for r8a77990 (R-Car E3)
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 02/02] ravb: Clean up duplex handling
  • From: Sergei Shtylyov
• Re: [PATCH/RFC 01/02] ravb: Do not announce 100Mbps HDX as supported
  • From: Sergei Shtylyov
• [PATCH] i2c: rcar: Add compatible support for r8a77990 (R-Car E3)
  • From: Wolfram Sang
• Re: [PATCH] arm64: dts: renesas: Include R-Car product name in DTSI files
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77995: Attach the SYS-DMAC to the IPMMU
  • From: Simon Horman
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 0/2] clk: renesas: mstp: Add support for RZ/A2
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] serial: sh-sci: Add support for R7S9210
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: Include R-Car product name in DTSI files
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 01/02] ravb: Do not announce 100Mbps HDX as supported
  • From: Magnus Damm
• Re: [PATCH/RFC 01/02] ravb: Do not announce 100Mbps HDX as supported
  • From: Magnus Damm
• Re: [PATCH] arm64: dts: renesas: Include R-Car product name in DTSI files
  • From: Magnus Damm
• Re: [PATCH/RFT 7/7] arm64: dts: renesas: r8a77965: Add Sound MIX support
  • From: Kuninori Morimoto
• Re: [PATCH/RFT 6/7] arm64: dts: renesas: r8a77965: Add Sound CTU support
  • From: Kuninori Morimoto
• Re: [PATCH/RFT 5/7] arm64: dts: renesas: r8a77965: Add Sound DVC device nodes
  • From: Kuninori Morimoto
• Re: [PATCH/RFT 4/7] arm64: dts: renesas: r8a77965: Add Sound SRC support
  • From: Kuninori Morimoto
• Re: [PATCH/RFT 3/7] arm64: dts: renesas: r8a77965: Add Sound device node and SSI support
  • From: Kuninori Morimoto
• Re: [PATCH/RFT 2/7] ASoC: rsnd: Document R-Car M3-N support
  • From: Kuninori Morimoto
• Re: [PATCH/RFC 01/02] ravb: Do not announce 100Mbps HDX as supported
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 01/02] ravb: Do not announce 100Mbps HDX as supported
  • From: Sergei Shtylyov
• Re: [PATCH/RFC 01/02] ravb: Do not announce 100Mbps HDX as supported
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: Include R-Car product name in DTSI files
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 02/02] ravb: Clean up duplex handling
  • From: Magnus Damm
• Re: [PATCH/RFC 01/02] ravb: Do not announce 100Mbps HDX as supported
  • From: Magnus Damm
• Re: [PATCH] arm64: dts: renesas: Include R-Car product name in DTSI files
  • From: Magnus Damm
• [PATCH v3] drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  • From: Sudeep Holla
• Re: [PATCH/RFC 02/02] ravb: Clean up duplex handling
  • From: Sergei Shtylyov
• Re: [PATCH v2] drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  • From: Sudeep Holla
• Re: [PATCH/RFC 01/02] ravb: Do not announce 100Mbps HDX as supported
  • From: Sergei Shtylyov
• Re: [PATCH v2] drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  • From: Lorenzo Pieralisi
• [PATCH v2] drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  • From: Sudeep Holla
• Re: [PATCH] arm64: dts: renesas: Include R-Car product name in DTSI files
  • From: Niklas Söderlund
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• CCREE performance on R-Car H3
  • From: Geert Uytterhoeven
• [PATCH/RFC 02/02] ravb: Clean up duplex handling
  • From: Magnus Damm
• [PATCH/RFC 01/02] ravb: Do not announce 100Mbps HDX as supported
  • From: Magnus Damm
• [PATCH/RFC 00/02] ravb: Duplex handling update
  • From: Magnus Damm
• [PATCH] arm64: dts: renesas: r8a77995: Attach the SYS-DMAC to the IPMMU
  • From: Magnus Damm
• [PATCH] arm64: dts: renesas: Include R-Car product name in DTSI files
  • From: Magnus Damm
• Re: [PATCH] drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  • From: Sudeep Holla
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH] ARM: shmobile: defconfig: Remove SOC_CAMERA
  • From: Hans Verkuil
• Re: [PATCH] ARM: shmobile: defconfig: Remove SOC_CAMERA
  • From: Simon Horman
• Re: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Simon Horman
• Re: [PATCH v3 4/4] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Simon Horman
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• Re: [PATCH] drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  • From: Lorenzo Pieralisi
• [PATCH] clk: renesas: r9a06g032: Avoid needless probe deferring
  • From: Phil Edworthy
• [PATCH] ARM: shmobile: defconfig: Remove SOC_CAMERA
  • From: Jacopo Mondi
• Re: [PATCH v2 3/4] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Wolfram Sang
• Re: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Andy Shevchenko
• Applied "regulator: bd9571mwv: Use "backup_mode" sysfs file instead of "wake_up"" to the regulator tree
  • From: Mark Brown
• Applied "regulator: bd9571mwv: Add support for toggle power switches" to the regulator tree
  • From: Mark Brown
• Applied "regulator: bd9571mwv: Document "backup_mode" sysfs file" to the regulator tree
  • From: Mark Brown
• Re: [PATCH v3 4/4] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Niklas Söderlund
• Re: [PATCH v3 4/4] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Niklas Söderlund
• Re: [PATCH v2 3/4] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Niklas Söderlund
• [PATCH] drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  • From: Sudeep Holla
• Re: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Geert Uytterhoeven
• Re: [PATCH v3 5/7] arm64: smp: remove cpu and numa topology information when hotplugging out CPU
  • From: Sudeep Holla
• [ANNOUNCE] Renesas tree closed for v4.19
  • From: Simon Horman
• Re: [PATCH v4 11/11] drm: rcar-du: Support interlaced video output through vsp1
  • From: Kieran Bingham
• Re: [PATCH] arm64: dts: renesas: r8a77980: add INTC-EX support
  • From: Simon Horman
• Re: [PATCH v3 4/4] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Wolfram Sang
• Re: [PATCH v2 3/4] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Wolfram Sang
• Re: [PATCH] DT: irqchip: renesas-irqc: document R8A77980 support
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
  • From: Simon Horman
• Re: [PATCH -stable] pinctrl: sh-pfc: r8a77970: remove SH_PFC_PIN_CFG_DRIVE_STRENGTH flag
  • From: Greg KH
• RE: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Phil Edworthy
• Re: [PATCH/RFT 2/7] ASoC: rsnd: Document R-Car M3-N support
  • From: Geert Uytterhoeven
• Re: [PATCH -stable] pinctrl: sh-pfc: r8a77970: remove SH_PFC_PIN_CFG_DRIVE_STRENGTH flag
  • From: Simon Horman
• Re: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Simon Horman
• Re: [PATCH/RFT 1/7] arm64: dts: renesas: r8a77965: Add Audio-DMAC device nodes
  • From: Geert Uytterhoeven
• Re: [PATCH/RFT 1/7] arm64: dts: renesas: r8a77965: Add Audio-DMAC device nodes
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: r8a77980: add INTC-EX support
  • From: Geert Uytterhoeven
• Re: [PATCH v4 11/11] drm: rcar-du: Support interlaced video output through vsp1
  • From: Laurent Pinchart
• Re: [PATCH v3 4/4] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Simon Horman
• Re: [PATCH] DT: irqchip: renesas-irqc: document R8A77980 support
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
  • From: Geert Uytterhoeven
• Re: [PATCH v3 3/4] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Simon Horman
• Re: [PATCH v3 1/4] mmc: tmio: Fix tuning flow
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a77470: Use r8a77470-cpg-mssr binding definitions
  • From: Simon Horman
• Re: [PATCH -stable] pinctrl: sh-pfc: r8a77970: remove SH_PFC_PIN_CFG_DRIVE_STRENGTH flag
  • From: Geert Uytterhoeven
• Re: [PATCH v3 5/7] arm64: smp: remove cpu and numa topology information when hotplugging out CPU
  • From: Geert Uytterhoeven
• Re: [PATCH 0/3] ravb: small sparse fixes
  • From: David Miller
• [PATCH] arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
  • From: Yoshihiro Shimoda
• [PATCH v5 11/11] drm: rcar-du: Support interlaced video output through vsp1
  • From: Kieran Bingham
• [PATCH v5 10/11] media: vsp1: Support Interlaced display pipelines
  • From: Kieran Bingham
• [PATCH v5 09/11] media: vsp1: Provide support for extended command pools
  • From: Kieran Bingham
• [PATCH v5 08/11] media: vsp1: Add support for extended display list headers
  • From: Kieran Bingham
• [PATCH v5 07/11] media: vsp1: Use header display lists for all WPF outputs linked to the DU
  • From: Kieran Bingham
• [PATCH v5 06/11] media: vsp1: Provide VSP1 feature helper macro
  • From: Kieran Bingham
• [PATCH v5 03/11] media: vsp1: Rename dl_child to dl_next
  • From: Kieran Bingham
• [PATCH v5 05/11] media: vsp1: Clean up DLM objects on error
  • From: Kieran Bingham
• [PATCH v5 04/11] media: vsp1: Remove unused display list structure field
  • From: Kieran Bingham
• [PATCH v5 02/11] media: vsp1: Remove packed attributes from aligned structures
  • From: Kieran Bingham
• [PATCH v5 00/11] R-Car DU Interlaced support through VSP1
  • From: Kieran Bingham
• [PATCH v5 01/11] media: vsp1: drm: Fix minor grammar error
  • From: Kieran Bingham
• Re: [PATCH v4 11/11] drm: rcar-du: Support interlaced video output through vsp1
  • From: Kieran Bingham
• [PATCH] arm64: dts: renesas: r8a77980: add INTC-EX support
  • From: Sergei Shtylyov
• RE: [RFC PATCH] ARM: Debug kernel copy by printing
  • From: Nicolas Pitre
• [PATCH/RFT 7/7] arm64: dts: renesas: r8a77965: Add Sound MIX support
  • From: Yoshihiro Kaneko
• [PATCH/RFT 6/7] arm64: dts: renesas: r8a77965: Add Sound CTU support
  • From: Yoshihiro Kaneko
• [PATCH/RFT 5/7] arm64: dts: renesas: r8a77965: Add Sound DVC device nodes
  • From: Yoshihiro Kaneko
• [PATCH/RFT 4/7] arm64: dts: renesas: r8a77965: Add Sound SRC support
  • From: Yoshihiro Kaneko
• [PATCH/RFT 3/7] arm64: dts: renesas: r8a77965: Add Sound device node and SSI support
  • From: Yoshihiro Kaneko
• [PATCH/RFT 2/7] ASoC: rsnd: Document R-Car M3-N support
  • From: Yoshihiro Kaneko
• [PATCH/RFT 1/7] arm64: dts: renesas: r8a77965: Add Audio-DMAC device nodes
  • From: Yoshihiro Kaneko
• [PATCH/RFT 0/7] rsnd: add support for r8a77965
  • From: Yoshihiro Kaneko
• Re: [PATCH] DT: irqchip: renesas-irqc: document R8A77980 support
  • From: Sergei Shtylyov
• [PATCH] DT: irqchip: renesas-irqc: document R8A77980 support
  • From: Sergei Shtylyov
• Re: [PATCH v4 10/11] media: vsp1: Support Interlaced display pipelines
  • From: Laurent Pinchart
• Re: [PATCH v3 5/7] arm64: smp: remove cpu and numa topology information when hotplugging out CPU
  • From: Sudeep Holla
• Re: [PATCH v4 10/11] media: vsp1: Support Interlaced display pipelines
  • From: Kieran Bingham
• Re: [PATCH v4 09/11] media: vsp1: Provide support for extended command pools
  • From: Kieran Bingham
• Re: [PATCH v3 5/7] arm64: smp: remove cpu and numa topology information when hotplugging out CPU
  • From: Sudeep Holla
• Re: [PATCH 1/2] adv7180: fix field type to V4L2_FIELD_ALTERNATE
  • From: Niklas Söderlund
• Re: [PATCH v3 5/7] arm64: smp: remove cpu and numa topology information when hotplugging out CPU
  • From: Sudeep Holla
• [PATCH -stable] pinctrl: sh-pfc: r8a77970: remove SH_PFC_PIN_CFG_DRIVE_STRENGTH flag
  • From: Niklas Söderlund
• Re: [PATCH v3 5/7] arm64: smp: remove cpu and numa topology information when hotplugging out CPU
  • From: Geert Uytterhoeven
• Re: [PATCH v4 08/11] media: vsp1: Add support for extended display list headers
  • From: Kieran Bingham
• RE: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Phil Edworthy
• [PATCH v3 4/4] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Niklas Söderlund
• [PATCH v3 3/4] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Niklas Söderlund
• [PATCH v3 2/4] mmc: tmio: Fix SCC error detection
  • From: Niklas Söderlund
• [PATCH v3 0/4] mmc: {tmio,renesas_sdhi}: fix tuning behavior
  • From: Niklas Söderlund
• [PATCH v3 1/4] mmc: tmio: Fix tuning flow
  • From: Niklas Söderlund
• Re: [PATCH v2 3/4] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Niklas Söderlund
• Re: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Andy Shevchenko
• RE: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Phil Edworthy
• Re: [PATCH v4 10/11] media: vsp1: Support Interlaced display pipelines
  • From: Kieran Bingham
• Re: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Andy Shevchenko
• Re: [PATCH v3 5/7] arm64: smp: remove cpu and numa topology information when hotplugging out CPU
  • From: Sudeep Holla
• Re: [PATCH 1/2] adv7180: fix field type to V4L2_FIELD_ALTERNATE
  • From: Hans Verkuil
• Re: [PATCH v4 11/11] drm: rcar-du: Support interlaced video output through vsp1
  • From: Laurent Pinchart
• RE: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Chris Brandt
• Re: [PATCH 1/2] adv7180: fix field type to V4L2_FIELD_ALTERNATE
  • From: Niklas Söderlund
• RE: [PATCH] ARM: dts: r8a77470: Use r8a77470-cpg-mssr binding definitions
  • From: Biju Das
• [PATCH] ARM: dts: r8a77470: Use r8a77470-cpg-mssr binding definitions
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/4] mmc: {tmio,renesas_sdhi}: fix tuning behavior
  • From: Niklas Söderlund
• Re: [PATCH v2 4/4] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Niklas Söderlund
• Re: [PATCH 1/2] adv7180: fix field type to V4L2_FIELD_ALTERNATE
  • From: Hans Verkuil
• RE: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Phil Edworthy
• renesas-drivers-2018-07-17-v4.18-rc5
  • From: Geert Uytterhoeven
• Re: [PATCH v6 0/10] rcar-vin: Add support for parallel input on Gen3
  • From: jacopo mondi
• Re: [RFC PATCH v1 1/4] media: dt-bindings: max9286: add device tree binding
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Geert Uytterhoeven
• Re: [PATCH v6 0/10] rcar-vin: Add support for parallel input on Gen3
  • From: Hans Verkuil
• Re: [RFC PATCH v1 1/4] media: dt-bindings: max9286: add device tree binding
  • From: jacopo mondi
• Re: [PATCH v3 5/7] arm64: smp: remove cpu and numa topology information when hotplugging out CPU
  • From: Geert Uytterhoeven
• Re: [PATCH v4 10/11] media: vsp1: Support Interlaced display pipelines
  • From: Laurent Pinchart
• RE: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Phil Edworthy
• [PATCH 2/2] adv7180: add g_frame_interval support
  • From: Niklas Söderlund
• [PATCH 1/2] adv7180: fix field type to V4L2_FIELD_ALTERNATE
  • From: Niklas Söderlund
• [PATCH 0/2] adv7180: fix format and frame interval
  • From: Niklas Söderlund
• Re: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Andy Shevchenko
• Re: [RFC PATCH v1 1/4] media: dt-bindings: max9286: add device tree binding
  • From: Geert Uytterhoeven
• Re: [PATCH v4] arm64: dts: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
  • From: Simon Horman
• Re: [PATCH] serial: sh-sci: Fix use-after-free on subsequent port startup
  • From: Simon Horman
• Re: [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Simon Horman
• Re: [PATCH] drm/shmobile: Replace drm_dev_unref with drm_dev_put
  • From: Simon Horman
• Re: [RFC PATCH v1 1/4] media: dt-bindings: max9286: add device tree binding
  • From: jacopo mondi
• Re: [PATCH v2 2/2] serial: 8250_dw: Add compatible string for Renesas RZ/N1 UART
  • From: Simon Horman
• Re: [PATCH v2 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Simon Horman
• Re: [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Simon Horman
• Re: [PATCH v2 00/03] arm64: dts: renesas: Add IPMMU device nodes V2
  • From: Simon Horman
• Re: [PATCH v4 3/3] regulator: bd9571mwv: Document "backup_mode" sysfs file
  • From: Niklas Söderlund
• Re: [PATCH v4 2/3] regulator: bd9571mwv: Add support for toggle power switches
  • From: Niklas Söderlund
• Re: [PATCH v4] arm64: dts: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
  • From: Geert Uytterhoeven
• Re: [PATCH v4] arm64: dts: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
  • From: Simon Horman
• [PATCH v3] arm64: dts: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
  • From: Simon Horman
• [PATCH v4] arm64: dts: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
  • From: Simon Horman
• Re: [PATCH v4 1/3] regulator: bd9571mwv: Use "backup_mode" sysfs file instead of "wake_up"
  • From: Niklas Söderlund
• RE: [PATCH 3/3] usb: host: xhci-rcar: Add a condition check about PLL active
  • From: Yoshihiro Shimoda
• Re: [PATCH v4 08/11] media: vsp1: Add support for extended display list headers
  • From: Laurent Pinchart
• Re: [PATCH] serial: sh-sci: Fix use-after-free on subsequent port startup
  • From: Ulrich Hecht
• Re: [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Geert Uytterhoeven
• RE: [PATCH] dt-bindings: irqchip: renesas-irqc: Document r8a77470 support
  • From: Biju Das
• Re: [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Simon Horman
• Re: [PATCH v2 2/3] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Simon Horman
• Re: [PATCH 2/2] media: i2c: Add driver for Aptina MT9V111
  • From: Kieran Bingham
• Re: [PATCH/RFT 1/6] i2c: designware: use open drain for recovery GPIO
  • From: Phil Reid
• Re: [PATCH/RFT 1/6] i2c: designware: use open drain for recovery GPIO
  • From: Wolfram Sang
• Re: [PATCH v2] i2c: recovery: make pin init look like STOP
  • From: Sergei Shtylyov
• [PATCH v2] i2c: recovery: make pin init look like STOP
  • From: Wolfram Sang
• Re: [PATCH] i2c: recovery: make pin init look like STOP
  • From: Wolfram Sang
• [PATCH] serial: sh-sci: Fix use-after-free on subsequent port startup
  • From: Geert Uytterhoeven
• Re: [PATCH v2] i2c: recovery: rename variable for easier understanding
  • From: Wolfram Sang
• Re: [PATCH 2/2] i2c: rcar: use the new get_bus_free callback
  • From: Wolfram Sang
• Re: [PATCH 1/2] i2c: recovery: add get_bus_free callback
  • From: Wolfram Sang
• [PATCH] drm/shmobile: Replace drm_dev_unref with drm_dev_put
  • From: Thomas Zimmermann
• Re: [PATCH v2 3/3] i2c: recovery: refactor recovery function
  • From: Wolfram Sang
• Re: [PATCH v2 2/3] i2c: recovery: require either get_sda or set_sda
  • From: Wolfram Sang
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• [ANNOUNCE] Renesas tree closing for v4.19
  • From: Simon Horman
• Re: [PATCH] i2c: recovery: make pin init look like STOP
  • From: Wolfram Sang
• Re: [PATCH] dt-bindings: usb-xhci: Add r8a77990 support
  • From: Rob Herring
• Re: [PATCH 3/3] ravb: fix byte order for TX descriptor tag field lower bits
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] ravb: fix byte order for TX descriptor tag field lower bits
  • From: Sergei Shtylyov
• Re: [PATCH v9 00/12] Sunxi: Add SMP support on A83T
  • From: Ondřej Jirman
• Re: [PATCH 3/3] ravb: fix byte order for TX descriptor tag field lower bits
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ravb: fix warning about memcpy length
  • From: Sergei Shtylyov
• Re: [PATCH 1/3] ravb: fix shadowing of symbol 'stats' in ravb_get_ethtool_stats()
  • From: Sergei Shtylyov
• Re: [PATCH 0/8] Fix PCI I/O space page leaks
  • From: Sergei Shtylyov
• Re: [PATCH v4 10/11] media: vsp1: Support Interlaced display pipelines
  • From: Kieran Bingham
• Re: [PATCH v2 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Rob Herring
• Re: [PATCH v4 11/11] drm: rcar-du: Support interlaced video output through vsp1
  • From: Kieran Bingham
• Re: [PATCH v4 08/11] media: vsp1: Add support for extended display list headers
  • From: Kieran Bingham
• Re: [PATCH 3/3] ravb: fix byte order for TX descriptor tag field lower bits
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] ravb: fix warning about memcpy length
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] ravb: fix shadowing of symbol 'stats' in ravb_get_ethtool_stats()
  • From: Geert Uytterhoeven
• [PATCH v4 3/3] regulator: bd9571mwv: Document "backup_mode" sysfs file
  • From: Geert Uytterhoeven
• [PATCH v4 1/3] regulator: bd9571mwv: Use "backup_mode" sysfs file instead of "wake_up"
  • From: Geert Uytterhoeven
• [PATCH v4 0/3] regulator: bd9571mwv: Add support for toggle power switches
  • From: Geert Uytterhoeven
• [PATCH v4 2/3] regulator: bd9571mwv: Add support for toggle power switches
  • From: Geert Uytterhoeven
• Re: [PATCH 0/8] Fix PCI I/O space page leaks
  • From: Lorenzo Pieralisi
• [PATCH 3/3] ravb: fix byte order for TX descriptor tag field lower bits
  • From: Niklas Söderlund
• [PATCH 2/3] ravb: fix warning about memcpy length
  • From: Niklas Söderlund
• [PATCH 0/3] ravb: small sparse fixes
  • From: Niklas Söderlund
• [PATCH 1/3] ravb: fix shadowing of symbol 'stats' in ravb_get_ethtool_stats()
  • From: Niklas Söderlund
• Re: [PATCH] i2c: recovery: make pin init look like STOP
  • From: Geert Uytterhoeven
• Re: [PATCH] i2c: recovery: make pin init look like STOP
  • From: Peter Rosin
• Re: [PATCH 3/3] usb: host: xhci-rcar: Add a condition check about PLL active
  • From: Ulrich Hecht
• Re: [PATCH] i2c: recovery: make pin init look like STOP
  • From: Geert Uytterhoeven
• Re: [PATCH] i2c: recovery: make pin init look like STOP
  • From: Peter Rosin
• Re: [PATCH/RFT 6/6] i2c: recovery: remove bogus check if SDA GPIO is set to output
  • From: Ulrich Hecht
• Re: [PATCH] i2c: recovery: make pin init look like STOP
  • From: Ulrich Hecht
• Re: [PATCH v3 2/2] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
  • From: Ulrich Hecht
• [PATCH 2/2] i2c: designware: Add support for a bus clock
  • From: Phil Edworthy
• [PATCH 1/2] dt: snps,designware-i2c: Add clock bindings documentation
  • From: Phil Edworthy
• [PATCH 0/2] i2c: designware: Add support for a bus clock
  • From: Phil Edworthy
• Re: [PATCH v3 0/3] regulator: bd9571mwv: Add support for toggle power switches
  • From: Geert Uytterhoeven
• Re: [PATCH v2 00/03] arm64: dts: renesas: Add IPMMU device nodes V2
  • From: Geert Uytterhoeven
• Re: [PATCH v3 2/2] arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support
  • From: Simon Horman
• Re: [PATCH v2 00/03] arm64: dts: renesas: Add IPMMU device nodes V2
  • From: Simon Horman
• Re: [PATCH v9 00/12] Sunxi: Add SMP support on A83T
  • From: Mylène Josserand
• Re: [PATCH/RFT 1/6] i2c: designware: use open drain for recovery GPIO
  • From: Phil Reid
• Re: [PATCH v2 4/4] mmc: renesas_sdhi: skip SCC error check when retuning
  • From: Wolfram Sang
• Re: [PATCH v2 2/4] mmc: tmio: Fix SCC error detection
  • From: Wolfram Sang
• Re: [PATCH v2 1/4] mmc: tmio: Fix tuning flow
  • From: Wolfram Sang
• Re: [PATCH v2 0/4] mmc: {tmio,renesas_sdhi}: fix tuning behavior
  • From: Wolfram Sang
• Re: [PATCH v2 3/4] mmc: renesas_sdhi: Fix sampling clock position selecting
  • From: Wolfram Sang
• Re: [PATCH v3 3/3] regulator: bd9571mwv: Document "backup_mode" sysfs file
  • From: Pavel Machek
• Re: [PATCH v3 0/3] regulator: bd9571mwv: Add support for toggle power switches
  • From: Pavel Machek
• [PATCH 2/8] PCI: of: Fix I/O space page leak
  • From: Sergei Shtylyov
• [PATCH 0/8] Fix PCI I/O space page leaks
  • From: Sergei Shtylyov
• [PATCH/RFT 1/6] i2c: designware: use open drain for recovery GPIO
  • From: Wolfram Sang
• [PATCH/RFT 2/6] i2c: imx: use open drain for recovery GPIO
  • From: Wolfram Sang
• [PATCH/RFT 4/6] i2c: davinci: set SDA as output for recovery
  • From: Wolfram Sang
• [PATCH/RFT 5/6] i2c: imx: set SDA as output for recovery
  • From: Wolfram Sang
• [PATCH/RFT 6/6] i2c: recovery: remove bogus check if SDA GPIO is set to output
  • From: Wolfram Sang
• [PATCH/RFT 3/6] i2c: designware: set SDA as output for recovery
  • From: Wolfram Sang
• [PATCH/RFT 0/6] i2c: recovery: fix GPIO usage for recovery
  • From: Wolfram Sang
• Re: [PATCH v3 1/3] regulator: bd9571mwv: Use "backup_mode" sysfs file instead of "wake_up"
  • From: Geert Uytterhoeven
• RE: [PATCH 2/2] dt-bindings: arm: Document RZ/A2 SoC DT bindings
  • From: Chris Brandt
• [PATCH v3 3/3] regulator: bd9571mwv: Document "backup_mode" sysfs file
  • From: Geert Uytterhoeven
• [PATCH v3 0/3] regulator: bd9571mwv: Add support for toggle power switches
  • From: Geert Uytterhoeven
• [PATCH v3 2/3] regulator: bd9571mwv: Add support for toggle power switches
  • From: Geert Uytterhoeven
• [PATCH v3 1/3] regulator: bd9571mwv: Use "backup_mode" sysfs file instead of "wake_up"
  • From: Geert Uytterhoeven
• RE: [PATCH 1/2] clk: renesas: mstp: Add support for r7s9210
  • From: Chris Brandt
• [renesas-drivers:topic/bd9571-toggle-power-switch-v3 1/3] drivers/regulator/bd9571mwv-regulator.c:320:34: error: 'dev_attr_backup_mode' undeclared; did you mean 'of_attach_node'?
  • From: kbuild test robot
• rcar-du/vsp1: possible recursive locking detected
  • From: Kieran Bingham
• Re: [PATCH 2/2] serial: sh-sci: Document r7s9210 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Geert Uytterhoeven
• RE: [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Chris Brandt
• Re: [PATCH 2/2] dt-bindings: arm: Document RZ/A2 SoC DT bindings
  • From: Geert Uytterhoeven
• RE: [PATCH 2/2] dt-bindings: arm: Document RZ/A2 SoC DT bindings
  • From: Chris Brandt
• Re: [PATCH v2 2/2] v4l: Add support for STD ioctls on subdev nodes
  • From: Marco Felsch
• Re: [PATCH v4 07/11] media: vsp1: Use header display lists for all WPF outputs linked to the DU
  • From: Kieran Bingham
• RE: [RFC PATCH] ARM: Debug kernel copy by printing
  • From: Fabrizio Castro
• Re: [PATCH v4 02/11] media: vsp1: Remove packed attributes from aligned structures
  • From: Kieran Bingham
• Re: [PATCH 1/2] ARM: shmobile: Add basic RZ/A2 SoC support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] clk: renesas: mstp: Add support for r7s9210
  • From: Geert Uytterhoeven
• [PATCH v2 2/2] serial: 8250_dw: Add compatible string for Renesas RZ/N1 UART
  • From: Phil Edworthy
• [PATCH v2 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Phil Edworthy
• [PATCH v2 0/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Phil Edworthy
• Re: [PATCH 2/2] clk: renesas: mstp: Document R7S9210 support
  • From: Geert Uytterhoeven
• Re: [PATCH] dma: sh: rcar-dmac: avoid to write CHCR.TE to 1 if TCR is set to 0
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/2] v4l: Add support for STD ioctls on subdev nodes
  • From: Javier Martinez Canillas
• Re: [PATCH v2 1/2] dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier
  • From: Geert Uytterhoeven
• Re: [PATCH] gpio: rcar: Implement .get_direction() callback
  • From: Linus Walleij
• Re: [PATCH RESEND] dt-bindings: media: rcar-vin: Add R8A77995 support
  • From: jacopo mondi
• Re: [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Simon Horman
• Re: [PATCH] gpiolib: use better errno if get_direction is not available
  • From: Simon Horman
• Re: [PATCH v2 2/3] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Geert Uytterhoeven
• Re: [PATCH] i2c: recovery: remove bogus check if SDA GPIO is set to output
  • From: Simon Horman
• Re: [PATCH] gpio: rcar: Implement .get_direction() callback
  • From: Simon Horman
• Re: [PATCH 1/2] dt: serial: Add Renesas RZ/N1 binding documentation
  • From: Simon Horman
• Re: [PATCH v2 2/3] serial: sh-sci: Stop TX DMA workqueue during port shutdown
  • From: Simon Horman
• Re: [PATCH] ARM: multi_v7_defconfig: Enable support for RZN1D-DB
  • From: Simon Horman
• Re: [PATCH] v4l: rcar_fdp1: Enable compilation on Gen2 platforms
  • From: Simon Horman
• Re: [PATCH RESEND] dt-bindings: media: rcar-vin: Add R8A77995 support
  • From: Simon Horman
• Re: [PATCH] dt-bindings: usb-xhci: Add r8a77990 support
  • From: Simon Horman
• Re: [PATCH 2/3] usb: host: xhci-rcar: Simplify getting the firmware name for R-Car Gen3
  • From: Simon Horman
• Re: [PATCH 1/3] usb: host: xhci-plat: add firmware_name for R-Car Gen3
  • From: Simon Horman
• Re: [PATCH 3/3] usb: host: xhci-rcar: Add a condition check about PLL active
  • From: Simon Horman
• Re: [GIT PULL] Renesas ARM Based SoC Arm SoC Updates for v4.19
  • From: Simon Horman
• Re: [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Magnus Damm
• Re: [PATCH v2 1/3] i2c: recovery: if possible send STOP with recovery pulses
  • From: Wolfram Sang
• [PATCH] i2c: recovery: make pin init look like STOP
  • From: Wolfram Sang
• Re: [PATCH 1/2] i2c: recovery: add get_bus_free callback
  • From: Wolfram Sang
• RE: [PATCH 1/2] ARM: shmobile: Add basic RZ/A2 SoC support
  • From: Chris Brandt
• Re: [PATCH 1/2] ARM: shmobile: Add basic RZ/A2 SoC support
  • From: Geert Uytterhoeven
• Re: [PATCH] gpiolib: use better errno if get_direction is not available
  • From: Wolfram Sang
• [PATCH] i2c: recovery: remove bogus check if SDA GPIO is set to output
  • From: Wolfram Sang
• Re: [PATCH] gpio: rcar: Implement .get_direction() callback
  • From: Wolfram Sang
• [PATCH/RFC] ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  • From: Geert Uytterhoeven
• Re: [PATCH] gpiolib: use better errno if get_direction is not available
  • From: Wolfram Sang
• RE: [PATCH 2/2] dt-bindings: arm: Document RZ/A2 SoC DT bindings
  • From: Chris Brandt
• RE: [PATCH 1/2] ARM: shmobile: Add basic RZ/A2 SoC support
  • From: Chris Brandt
• Re: [PATCH 00/11] clk: renesas: rcar-gen3: OSC and RCLK improvements
  • From: Simon Horman