Re: [PATCH 2/2] media: i2c: adv748x: Handle TX[A|B] power management

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kieran,

On Tue, Aug 28, 2018 at 04:47:05PM +0100, Kieran Bingham wrote:
> Hi Jacopo,
>
> Thank you for the patch,
>
> On 27/08/18 12:28, Jacopo Mondi wrote:
> > As the driver is now allowed to probe with a single output endpoint,
> > power management routines shall now take into account the case a CSI-2 TX
> > is not enabled.
> >
> > Unify the adv748x_tx_power() routine to handle transparently TXA and TXB,
> > and enable the CSI-2 outputs conditionally.
>
> Great - I definitely want to see this code refactored. Ideally with a
> full removal of the register lists ... but we can get there in stages :D
>
> >
> > The AFE and HDMI backends have fixed output routes, so enable the designated
> > CSI-2 output according to that.
>
> Ah ... but what happens when the links can be changed dynamically ?
> I guess we handle that then ...
>
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> >  drivers/media/i2c/adv748x/adv748x-afe.c  |  2 +-
> >  drivers/media/i2c/adv748x/adv748x-core.c | 52 +++++++++++++-------------------
> >  drivers/media/i2c/adv748x/adv748x-csi2.c |  5 ---
> >  drivers/media/i2c/adv748x/adv748x-hdmi.c |  2 +-
> >  drivers/media/i2c/adv748x/adv748x.h      |  4 +--
> >  5 files changed, 25 insertions(+), 40 deletions(-)
> >
> > diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c
> > index edd25e8..6d78105 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-afe.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-afe.c
> > @@ -286,7 +286,7 @@ static int adv748x_afe_s_stream(struct v4l2_subdev *sd, int enable)
> >  			goto unlock;
> >  	}
> >
> > -	ret = adv748x_txb_power(state, enable);
> > +	ret = adv748x_tx_power(&state->txb, enable);
> >  	if (ret)
> >  		goto unlock;
> >
> > diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> > index 78d5996..0adbcb6 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-core.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> > @@ -292,33 +292,16 @@ static const struct adv748x_reg_value adv748x_power_down_txb_1lane[] = {
> >  	{ADV748X_PAGE_EOR, 0xff, 0xff}	/* End of register table */
> >  };
> >
> > -int adv748x_txa_power(struct adv748x_state *state, bool on)
> > +int adv748x_tx_power(struct adv748x_csi2 *tx, bool on)
> >  {
> > +	struct adv748x_state *state = tx->state;
> > +	const struct adv748x_reg_value *reglist;
> >  	int val;
> >
> > -	val = txa_read(state, ADV748X_CSI_FS_AS_LS);
> > -	if (val < 0)
> > -		return val;
> > -
> > -	/*
> > -	 * This test against BIT(6) is not documented by the datasheet, but was
> > -	 * specified in the downstream driver.
> > -	 * Track with a WARN_ONCE to determine if it is ever set by HW.
> > -	 */
> > -	WARN_ONCE((on && val & ADV748X_CSI_FS_AS_LS_UNKNOWN),
> > -			"Enabling with unknown bit set");
>
> I was going to query if this was dropped, but the check is identical in
> the other function.
>
> The original BSP driver had this condition as a 'fatal' error from what
> I recall, which is why I kept it as a warning check.
>
> I've only seen it fire once, when I had an incorrect power-on-off sequence.
>
> I think the bit actually likely only gets set from one of the reglists
> in the driver.
>
> The bit is undocumented, and I didn't get any further detail from
> querying analog devices. At somepoint I'd like to drop the WARN_ON with
> an equivalent change which removes all references to this bit (whichever
> entry in the register lists sets the bit).
>
> But that's not an issue for this patch.
>
>
>
> > -
> > -	if (on)
> > -		return adv748x_write_regs(state, adv748x_power_up_txa_4lane);
> > -
> > -	return adv748x_write_regs(state, adv748x_power_down_txa_4lane);
> > -}
> > -
> > -int adv748x_txb_power(struct adv748x_state *state, bool on)
> > -{
> > -	int val;
> > +	if (!is_tx_enabled(tx))
> > +		return 0;
> >
> > -	val = txb_read(state, ADV748X_CSI_FS_AS_LS);
>
> I think we can remove txa_read(), txb_read() now  ?

Ah yes, I thought I did that already...

>
> > +	val = tx_read(tx, ADV748X_CSI_FS_AS_LS);
> >  	if (val < 0)
> >  		return val;
> >
> > @@ -331,9 +314,13 @@ int adv748x_txb_power(struct adv748x_state *state, bool on)
> >  			"Enabling with unknown bit set");
> >
> >  	if (on)
> > -		return adv748x_write_regs(state, adv748x_power_up_txb_1lane);
> > +		reglist = is_txa(tx) ? adv748x_power_up_txa_4lane :
> > +				       adv748x_power_up_txb_1lane;
> > +	else
> > +		reglist = is_txa(tx) ? adv748x_power_down_txa_4lane :
> > +				       adv748x_power_down_txb_1lane;
> >
> > -	return adv748x_write_regs(state, adv748x_power_down_txb_1lane);
> > +	return adv748x_write_regs(state, reglist);
> >  }
> >
> >  /* -----------------------------------------------------------------------------
> > @@ -482,6 +469,7 @@ static const struct adv748x_reg_value adv748x_init_txb_1lane[] = {
> >  static int adv748x_reset(struct adv748x_state *state)
> >  {
> >  	int ret;
> > +	u8 regval = ADV748X_IO_10_PIX_OUT_EN;
>
> As discussed, I believe this refers to the 8-bit TTL I/O port.
>
> Ideally - this functionality should be broken out to a separate port (or
> pair of ports) - but that's not for here.
>
> Keeping this here maintains the existing behaviour of the driver so
> that's fine, but perhaps if you re-spin - could you add a comment to
> state that the ADV748X_IO_10_PIX_OUT_EN refers to the non-supported TTL
> IO port ?

I would actually go and remove this with a patch on top of this one.

Will do in v2.

Thanks
   j

>
> >
> >  	ret = adv748x_write_regs(state, adv748x_sw_reset);
> >  	if (ret < 0)
> > @@ -496,22 +484,24 @@ static int adv748x_reset(struct adv748x_state *state)
> >  	if (ret)
> >  		return ret;
> >
> > -	adv748x_txa_power(state, 0);
> > +	adv748x_tx_power(&state->txa, 0);
> >
> >  	/* Init and power down TXB */
> >  	ret = adv748x_write_regs(state, adv748x_init_txb_1lane);
> >  	if (ret)
> >  		return ret;
> >
> > -	adv748x_txb_power(state, 0);
> > +	adv748x_tx_power(&state->txb, 0);
> >
> >  	/* Disable chip powerdown & Enable HDMI Rx block */
> >  	io_write(state, ADV748X_IO_PD, ADV748X_IO_PD_RX_EN);
> >
> > -	/* Enable 4-lane CSI Tx & Pixel Port */
> > -	io_write(state, ADV748X_IO_10, ADV748X_IO_10_CSI4_EN |
> > -				       ADV748X_IO_10_CSI1_EN |
> > -				       ADV748X_IO_10_PIX_OUT_EN);
> > +	/* Conditionally enable 4-lane CSI Tx & Pixel Port */
> > +	if (is_tx_enabled(&state->txa))
> > +		regval |= ADV748X_IO_10_CSI4_EN;
> > +	if (is_tx_enabled(&state->txb))
> > +		regval |= ADV748X_IO_10_CSI1_EN;
> > +	io_write(state, ADV748X_IO_10, regval);
>
> Could be a bit of powersaving here :) Great.
>
>
>
> >  	/* Use vid_std and v_freq as freerun resolution for CP */
> >  	cp_clrset(state, ADV748X_CP_CLMP_POS, ADV748X_CP_CLMP_POS_DIS_AUTO,
> > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > index 709cdea..36bc786 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> > @@ -18,11 +18,6 @@
> >
> >  #include "adv748x.h"
> >
> > -static bool is_txa(struct adv748x_csi2 *tx)
> > -{
> > -	return tx == &tx->state->txa;
> > -}
> > -
> >  static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
> >  					    unsigned int vc)
> >  {
> > diff --git a/drivers/media/i2c/adv748x/adv748x-hdmi.c b/drivers/media/i2c/adv748x/adv748x-hdmi.c
> > index aecc2a8..abb6568 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-hdmi.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-hdmi.c
> > @@ -362,7 +362,7 @@ static int adv748x_hdmi_s_stream(struct v4l2_subdev *sd, int enable)
> >
> >  	mutex_lock(&state->mutex);
> >
> > -	ret = adv748x_txa_power(state, enable);
> > +	ret = adv748x_tx_power(&state->txa, enable);
> >  	if (ret)
> >  		goto done;
> >
> > diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> > index 1cf46c40..2e8d37a 100644
> > --- a/drivers/media/i2c/adv748x/adv748x.h
> > +++ b/drivers/media/i2c/adv748x/adv748x.h
> > @@ -93,6 +93,7 @@ struct adv748x_csi2 {
> >  #define notifier_to_csi2(n) container_of(n, struct adv748x_csi2, notifier)
> >  #define adv748x_sd_to_csi2(sd) container_of(sd, struct adv748x_csi2, sd)
> >  #define is_tx_enabled(_tx) ((_tx)->state->endpoints[(_tx)->port] != NULL)
> > +#define is_txa(_tx) ((_tx) == &(_tx)->state->txa)
> >
> >  enum adv748x_hdmi_pads {
> >  	ADV748X_HDMI_SINK,
> > @@ -400,8 +401,7 @@ void adv748x_subdev_init(struct v4l2_subdev *sd, struct adv748x_state *state,
> >  int adv748x_register_subdevs(struct adv748x_state *state,
> >  			     struct v4l2_device *v4l2_dev);
> >
> > -int adv748x_txa_power(struct adv748x_state *state, bool on);
> > -int adv748x_txb_power(struct adv748x_state *state, bool on);
> > +int adv748x_tx_power(struct adv748x_csi2 *tx, bool on);
> >
> >  int adv748x_afe_init(struct adv748x_afe *afe);
> >  void adv748x_afe_cleanup(struct adv748x_afe *afe);
> >
>

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux