Hi Simon,
On Thu, Aug 30, 2018 at 3:08 PM Simon Horman <horms@xxxxxxxxxxxx> wrote:
> On Tue, Aug 28, 2018 at 04:10:59PM +0200, Geert Uytterhoeven wrote:
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 4 +-
> > arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 16 +++----
> > arch/arm64/boot/dts/renesas/r8a7795.dtsi | 48 ++++++++++----------
> > arch/arm64/boot/dts/renesas/r8a7796.dtsi | 48 ++++++++++----------
> > arch/arm64/boot/dts/renesas/r8a77965.dtsi | 36 +++++++--------
> > arch/arm64/boot/dts/renesas/r8a77970.dtsi | 8 ++--
> > arch/arm64/boot/dts/renesas/r8a77980.dtsi | 16 +++----
> > arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 2 +-
> > 8 files changed, 89 insertions(+), 89 deletions(-)
>
> Thanks Geert,
>
> I took the liberty of updating the subject with s/r8a7796/renesas/
Sorry, I thought I had fixed that. Probably on the wrong branch.
> and fixing a few more cases, likely ones that slipped in after you prepared
> this patch (and are currently only local to my tree).
>
> The incremental diff is:
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> index 2798c4c9cf94..010a9958693d 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> @@ -1455,7 +1455,7 @@
> clocks = <&cpg CPG_MOD 703>;
> phys = <&usb2_phy0>;
> phy-names = "usb";
> - companion= <&ohci0>;
> + companion = <&ohci0>;
> power-domains = <&sysc 32>;
> resets = <&cpg 703>;
> status = "disabled";
> @@ -1468,7 +1468,7 @@
> clocks = <&cpg CPG_MOD 702>;
> phys = <&usb2_phy1>;
> phy-names = "usb";
> - companion= <&ohci1>;
> + companion = <&ohci1>;
> power-domains = <&sysc 32>;
> resets = <&cpg 702>;
> status = "disabled";
> diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> index 8bf3091a899c..1b316d79df88 100644
> --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> @@ -127,7 +127,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x71>;
> - reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
> };
> };
Thanks, looks good to me!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
