[PATCH 1/3] drm: rcar-du: Update Gen3 output limitations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The R-Car Gen3 DU utilises the VSP1 hardware for memory access. The
limits on the RPF and WPF in this pipeline are 8190x8190.

Update the supported maximum sizes accordingly.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/rcar-du/rcar_du_kms.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index ed7fa3204892..7c7aff8cdf77 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -512,12 +512,22 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
 
 	dev->mode_config.min_width = 0;
 	dev->mode_config.min_height = 0;
-	dev->mode_config.max_width = 4095;
-	dev->mode_config.max_height = 2047;
 	dev->mode_config.normalize_zpos = true;
 	dev->mode_config.funcs = &rcar_du_mode_config_funcs;
 	dev->mode_config.helper_private = &rcar_du_mode_config_helper;
 
+	if (rcdu->info->gen < 3) {
+		dev->mode_config.max_width = 4095;
+		dev->mode_config.max_height = 2047;
+	} else {
+		/*
+		 * The Gen3 DU uses the VSP1 for memory access, and is limited
+		 * to frame sizes of 8190x8190.
+		 */
+		dev->mode_config.max_width = 8190;
+		dev->mode_config.max_height = 8190;
+	}
+
 	rcdu->num_crtcs = hweight8(rcdu->info->channels_mask);
 
 	ret = rcar_du_properties_init(rcdu);
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux