From: Veeraiyan Chidambaram <veeraiyan.chidambaram@xxxxxxxxxxxx>
When RCAR3 is in Gadget mode, if host is detached an interrupt
will be generated and Suspended state bit is set in interrupt status
register. Interrupt handler will call driver->suspend(composite_suspend)
if suspended state bit is set. composite_suspend will call
ffs_func_suspend which will post FUNCTIONFS_SUSPEND and will be consumed
by user space application via /dev/ep0.
To be able to detect host detach, extend the DVSQ_MASK to cover the
Suspended bit of the DVSQ[2:0] bitfield from the Interrupt Status
Register 0 (INTSTS0) register and perform appropriate action in the
DVST interrupt handler (usbhsg_irq_dev_state).
Without this commit, disconnection of the phone from R-Car-H3 ES2.0
Salvator-X CN9 port is not recognized and reverse role switch does
not not happen. If phone is connected again it does not enumerate.
With this commit, disconnection will be recognized and reverse role
switch will happen. If phone is connected again it will enumerate
properly and will become visible in the output of 'lsusb'.
Signed-off-by: Veeraiyan Chidambaram <veeraiyan.chidambaram@xxxxxxxxxxxx>
Signed-off-by: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
---
drivers/usb/renesas_usbhs/common.h | 3 ++-
drivers/usb/renesas_usbhs/mod_gadget.c | 13 ++++++++++---
2 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index 6e02aa3e287f..9eb69d2a4640 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -163,11 +163,12 @@ struct usbhs_priv;
#define VBSTS (1 << 7) /* VBUS_0 and VBUSIN_0 Input Status */
#define VALID (1 << 3) /* USB Request Receive */
-#define DVSQ_MASK (0x3 << 4) /* Device State */
+#define DVSQ_MASK (0x7 << 4) /* Device State */
#define POWER_STATE (0 << 4)
#define DEFAULT_STATE (1 << 4)
#define ADDRESS_STATE (2 << 4)
#define CONFIGURATION_STATE (3 << 4)
+#define SUSPENDED_STATE (4 << 4)
#define CTSQ_MASK (0x7) /* Control Transfer Stage */
#define IDLE_SETUP_STAGE 0 /* Idle stage or setup stage */
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index c068b673420b..1af8034d17c5 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -465,12 +465,19 @@ static int usbhsg_irq_dev_state(struct usbhs_priv *priv,
{
struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+ int state = usbhs_status_get_device_state(irq_state);
gpriv->gadget.speed = usbhs_bus_get_speed(priv);
- dev_dbg(dev, "state = %x : speed : %d\n",
- usbhs_status_get_device_state(irq_state),
- gpriv->gadget.speed);
+ dev_dbg(dev, "state = %x : speed : %d\n", state, gpriv->gadget.speed);
+
+ if (gpriv->driver &&
+ gpriv->driver->suspend &&
+ gpriv->gadget.speed != USB_SPEED_UNKNOWN &&
+ (state & SUSPENDED_STATE)) {
+ gpriv->driver->suspend(&gpriv->gadget);
+ usb_gadget_set_state(&gpriv->gadget, USB_STATE_SUSPENDED);
+ }
return 0;
}
--
2.18.0
