Re: [PATCH v2] clk: renesas: cpg-mssr: Add R7S9210 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 27, 2018 at 11:21:39AM -0500, Chris Brandt wrote:
> Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module
> Standby.
> 
> The Module Standby HW in the RZ/A series is very close to R-Car HW, except
> for how the registers are laid out.
> The MSTP registers are only 8-bits wide, there is no status registers
> (MSTPST), and the register offsets are a little different. Since the RZ/A
> hardware manuals refer to these registers as the Standby Control Registers,
> we'll use that name to distinguish the RZ/A type for the R-Car type.
> 
> Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
> ---

> +++ b/drivers/clk/renesas/r7s9210-cpg-mssr.c
> @@ -0,0 +1,192 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*


> +++ b/include/dt-bindings/clock/r7s9210-cpg-mssr.h
> @@ -0,0 +1,21 @@
> +/* SPDX-License-Identifier: GPL-2.0+

The proper identifier is GPL-2.0-or-later



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux