Hi Rob, On Thu, Aug 30, 2018 at 3:49 PM Rob Herring <robh@xxxxxxxxxx> wrote: > On Thu, Aug 30, 2018 at 3:05 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote: > > On Wed, Aug 29, 2018 at 2:52 AM Rob Herring <robh@xxxxxxxxxx> wrote: > > > On Mon, Aug 27, 2018 at 11:21:39AM -0500, Chris Brandt wrote: > > > > Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module > > > > Standby. > > > > > > > > The Module Standby HW in the RZ/A series is very close to R-Car HW, except > > > > for how the registers are laid out. > > > > The MSTP registers are only 8-bits wide, there is no status registers > > > > (MSTPST), and the register offsets are a little different. Since the RZ/A > > > > hardware manuals refer to these registers as the Standby Control Registers, > > > > we'll use that name to distinguish the RZ/A type for the R-Car type. > > > > > > > > Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx> > > > > --- > > > > > > > +++ b/drivers/clk/renesas/r7s9210-cpg-mssr.c > > > > @@ -0,0 +1,192 @@ > > > > +// SPDX-License-Identifier: GPL-2.0+ > > > > +/* > > > > > > > > > > +++ b/include/dt-bindings/clock/r7s9210-cpg-mssr.h > > > > @@ -0,0 +1,21 @@ > > > > +/* SPDX-License-Identifier: GPL-2.0+ > > > > > > The proper identifier is GPL-2.0-or-later > > > > Documentation/process/license-rules.rst disagrees. > > Indeed, but: https://spdx.org/licenses/GPL-2.0+.html > > I think this changed about the time the kernel adopted SPDX. I guess > it is fine as-is until we change the documentation. Unlikely to happen, cfr. https://lore.kernel.org/lkml/20180822194613.GB3457@xxxxxxxxx/ Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
