Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- [PATCH 10/10] omap3: pm: omap3630 boards: enable 3630 opp tables
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 03/10 V3] omap3: pm: use opp accessor functions for omap34xx
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 00/10 v3] omap3: pm: introduce support for 3630 OPPs
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH v5] OMAP1: LCD_DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- [PATCH] Zoom2/3:Update hsmmc board config params
- From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
- [PATCH 30/38] move mipid_spi_remove to .devexit.text
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- RE: OMAP3: enabling CPU idle leads to panic
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support.
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 3/3] OMAP: UART: convert to use omap_device layer
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/3] OMAP3: add omap_hwmods for UART1,2,3
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/3] OMAP: UART: remove 8520 assumptions from UART core
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 0/3] UART conversion to omap_device layer
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: hwmod and PER going idle before WFI
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: hwmod and PER going idle before WFI
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- [ANNOUNCE] PM branch updated to v2.6.32-rc8
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- hwmod and PER going idle before WFI
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support.
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] OMAP: omap_device: add to_omap_device() macro
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: OMAP3: enabling CPU idle leads to panic
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 5/8] OMAP: omap_device: add usecounting
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] OMAP: hwmod: allow idle after HWMOD_INIT_NO_IDLE
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] OMAP: hwmod: add read/write API for SYSCONFIG
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCHv2 0/1] omap3: cpuidle: Update statistics for correct state
- From: "Premi, Sanjeev" <premi@xxxxxx>
- [PATCHv2 1/1] omap3: cpuidle: Update statistics for correct state
- From: Sanjeev Premi <premi@xxxxxx>
- [PATCHv2 0/1] omap3: cpuidle: Update statistics for correct state
- From: Sanjeev Premi <premi@xxxxxx>
- Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
- From: Olof Johansson <olof@xxxxxxxxx>
- RE: Enabling HSUSB1 port on OMAP3430 labrador
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- RE: [PATCH 2/5] ZOOM: DSS2: Add nec panel for zoom display
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: [PATCH V4 3/3] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: Implemented support for VFP PM context saving
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: [PATCH V4 3/3] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: <kalle.jokiniemi@xxxxxxxxx>
- OMAP3: enabling CPU idle leads to panic
- From: Sergey Lapin <slapinid@xxxxxxxxx>
- Re: [PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
- From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
- Enabling HSUSB1 port on OMAP3430 labrador
- From: Kovacs Peter Tamas <p.kovacs@xxxxxxxxxxxxxxx>
- RE: [PATCH] OMAP3: DVFS: No sdrc AC timing changes during core dvfs
- From: <Tero.Kristo@xxxxxxxxx>
- RE: [PATCH 3/3] AM3517: Add support for TSC2004 driver
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- RE: [PATCH 1/3] Mux configuration for AM3517 TouchScreen support
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- RE: [PATCH 1/2] ARM: Implemented support for VFP PM context saving
- From: <Tero.Kristo@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: Implemented support for VFP PM context saving
- From: Catalin Marinas <catalin.marinas@xxxxxxx>
- [PATCH] rtc: make rtc-omap wakeup capable
- From: Sekhar Nori <nsekhar@xxxxxx>
- Re: [PATCH 1/2] ARM: Implemented support for VFP PM context saving
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: [PATCH 2/2] OMAP3: Implemented VFP restore/save context
- From: <Tero.Kristo@xxxxxxxxx>
- Re: [PATCH 2/5] ZOOM: DSS2: Add nec panel for zoom display
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- RE: [PATCH 2/2] OMAP3: Implemented VFP restore/save context
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- [RFC][PATCH v2] OMAP: McBSP: Use register cache
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- [PATCH 1/2] ARM: Implemented support for VFP PM context saving
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- [PATCH 0/2] VFP save/restore for OMAP3
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- [PATCH 2/2] OMAP3: Implemented VFP restore/save context
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- RE: [PATCH] omap3: sr: Update ON voltage levels based on VSEL
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: [PATCH] DSPBRIDGE: Interface tightening to check for invalid
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Re: [RFC][PATCH] ARM: OMAP: McBSP: Use register cache
- From: Jarkko Nikula <jhnikula@xxxxxxxxx>
- Re: [PATCH 0/9] dspbridge cleanup patches
- From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
- Do we have the benchmark about MUSB host of OMAP3530
- From: jung songtan <jungsongtan@xxxxxxxxx>
- Re: [PATCH] omap3: sr: Update ON voltage levels based on VSEL
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 2/9] DSPBRIDGE: trivial checkpatch fixes
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH 7/9] DSPBRIDGE: Remove main DPC wrapper for IO and MMUfault
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH 6/9] DSPBRIDGE: Remove DPC, create, destroy and schedule wrappers
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH 5/9] DSPBRIDGE: trivial cleanup and indentation for io_sm
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH 0/9] dspbridge cleanup patches
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH 9/9] DSPBRIDGE: Remove DPC object structure
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH 4/9] DSPBRIDGE: Use _IOxx macro to define ioctls
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- [PATCH 8/9] DSPBRIDGE: Remove DPC module from SERVICES layer
- From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
- Re: [RFC][PATCH] ARM: OMAP: McBSP: Use register cache
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] OMAP3: Implemented VFP restore/save context
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- PATCH] DSPBRIDGE: NULL Pointer Dereference fix
- From: "Ramos Falcon, Ernesto" <ernesto@xxxxxx>
- Re: [RFC][PATCH] ARM: OMAP: McBSP: Use register cache
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- [PATCH] DSPBRIDGE: Interface tightening to check for invalid
- From: "Ramos Falcon, Ernesto" <ernesto@xxxxxx>
- Re: NULL pointer dereference with 2.6.31 on OMAP243
- From: Chris Banker <cbanker@xxxxxxxxx>
- [PATCH v5] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH v4] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH 3/3] OMAP: omap_device: optionally auto-adjust device activate/deactivate latencies
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/4] AM3517: MMC: Add low-level init code for HSMMC controller
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- [PATCH 4/4] AM3517: MMC: Make HSMMC driver built-in
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- [PATCH 2/4] AM3517: MMC: Modifying board-evm file to add mmc_init
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- [PATCH 3/4] AM3517: MMC: Modifying Makefile to enable MMC init
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- [PATCH 0/4] AM3517: MMC: Add support for HSMMC
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- RE: [PATCH] USB: twl4030: Enable USB regulators before enabling USB charging
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH v4] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Ladislav Michl <Ladislav.Michl@xxxxxxxxx>
- [PATCH 2/2] OMAP: ams_delta_defconfig: enable LCD class device support
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- [PATCH 1/2] omapfb: lcd_ams_delta: add support for contrast control
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- [PATCH 0/2] [RESEND] Amstrad Delta: add support for LCD contrast
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: [PATCH] USB: twl4030: Enable USB regulators before enabling USB charging
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/3] AM3517: Add support for TSC2004 driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3] Mux configuration for AM3517 TouchScreen support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH-v5 2/4] OMAP3: Add support for NAND on ZOOM2/LDP boards
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: DSS2 panel question
- From: TAO HU <tghk48@xxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: Implemented support for VFP PM context saving
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/3] OMAP: omap_device: track latency in nanoseconds
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 3/3] OMAP: omap_device: optionally auto-adjust device activate/deactivate latencies
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/3] OMAP: omap_device: fix nsec/usec conversion in latency calculations
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] [OMAP1] use gen_nand
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support.
- From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
- Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
- From: Olof Johansson <olof@xxxxxxxxx>
- Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
- From: Olof Johansson <olof@xxxxxxxxx>
- [PATCH] I2C: OMAP3: PM: (re)init for every transfer to support off-mode
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH] OMAP3: id code detection 3525 vs 3515
- From: Sanjeev Premi <premi@xxxxxx>
- RE: [PATCH V4 3/3] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: "Sonasath, Moiz" <m-sonasath@xxxxxx>
- Re: [alsa-devel] [PATCH 6/8] Audio driver of Always Innovating OMAP3-based Touch Book
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- RE: [PATCH V2] OMAP3: PM: Fix for MPU power domain MEM BANK position
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v3] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
- [PATCH] omap3: sr: Update ON voltage levels based on VSEL
- From: Sanjeev Premi <premi@xxxxxx>
- RE: VDD1 voltage after resume from idle
- From: "Premi, Sanjeev" <premi@xxxxxx>
- missing keypad interrupts
- From: Sriram V <vshrirama@xxxxxxxxx>
- Re: [PATCH v3] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Ladislav Michl <Ladislav.Michl@xxxxxxxxx>
- [PATCH] [OMAP1] use gen_nand
- From: Ladislav Michl <Ladislav.Michl@xxxxxxxxx>
- Re: [alsa-devel] [PATCH 6/8] AI TB: Audio driver of Always Innovating OMAP3-based Touch Book
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: DSS2 panel question
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- RE: [PATCH 2/3] Input:TouchScreen: Introduce TSC2004 driver support
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- RE: [PATCH 2/5] ZOOM: DSS2: Add nec panel for zoom display
- From: "Y, Kishore" <kishore.y@xxxxxx>
- RE: [PATCH 2/5] ZOOM: DSS2: Add nec panel for zoom display
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- RE: [PATCHV2 4/4] OMAP3: add support for 192Mhz sgx clock
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- RE: [PATCH 1/5] ZOOM: DSS2: changes in zoom board file for display support
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- RE: [PATCHV2 3/4] OMAP3: Correct width for CLKSEL Fields
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- RE: [PATCHV2 3/4] OMAP3: Correct width for CLKSEL Fields
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- RE: [PATCH V4 3/3] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: <kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH 1/1] DSPBRIDGE: cache operation against kernel address instead of user's
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH 3/3] [OMAP] HTCHERALD: Add USB configuration to HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 2/3] [OMAP] USB: Add omap7xx-specific pin muxing
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 1/3] [OMAP1] MUX: Add omap7xx-specific USB mux pins
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 0/3] Add USB mux support for omap7xx and config for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH v3] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH v2] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: Additional patches for USB support on HTC Herald?
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Additional patches for USB support on HTC Herald?
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH v2] mmc-omap: Add support for 16-bit and 32-bit registers
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: NULL pointer dereference with 2.6.31 on OMAP243
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
- From: "Menon, Nishanth" <nm@xxxxxx>
- RE: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: [PATCH 1/1] DSPBRIDGE: cache operation against kernel address instead of user's
- From: Russell King <rmk@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] DSPBRIDGE: cache operation against kernel address instead of user's
- From: Russell King <rmk@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
- From: "Menon, Nishanth" <nm@xxxxxx>
- RE: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- [RFC] [PATCH] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set)
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- McBSP troubles
- From: Sergey Lapin <slapinid@xxxxxxxxx>
- Re: Problem trying to pull particular commit from PM tree
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
- From: Nishanth Menon <nm@xxxxxx>
- Re: hub 2-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
- From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxxxxx>
- hub 2-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
- From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: linux-next: omap tree misaplied patch
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: linux-next: manual merge of the input tree with the omap tree
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: FEATURES - is it good enough
- From: "Aguirre, Sergio" <saaguirre@xxxxxx>
- Re: FEATURES - is it good enough
- From: Nishanth Menon <nm@xxxxxx>
- RE: FEATURES - is it good enough
- From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
- RE: FEATURES - is it good enough
- From: "Aguirre, Sergio" <saaguirre@xxxxxx>
- RE: FEATURES - is it good enough
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: VDD1 voltage after resume from idle
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: FEATURES - is it good enough
- From: Nishanth Menon <nm@xxxxxx>
- Re: VDD1 voltage after resume from idle
- From: Jean Pihet <jpihet@xxxxxxxxxx>
- Re: VDD1 voltage after resume from idle
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: VDD1 voltage after resume from idle
- From: Jean Pihet <jpihet@xxxxxxxxxx>
- Re: FEATURES - is it good enough
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: VDD1 voltage after resume from idle
- From: Maxime Petazzoni <mpetazzoni@xxxxxxxxxx>
- Re: VDD1 voltage after resume from idle
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: VDD1 voltage after resume from idle
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: FEATURES - is it good enough (was Re: [PATCH v3 1/2] omap: introduce uart_no_empty_fifo_read feature)
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [PATCH 2/3] Input:TouchScreen: Introduce TSC2004 driver support
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: VDD1 voltage after resume from idle
- From: Maxime Petazzoni <mpetazzoni@xxxxxxxxxx>
- Re: [PATCH V4 3/3] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCHV2 4/4] OMAP3: add support for 192Mhz sgx clock
- From: Nishanth Menon <nm@xxxxxx>
- FEATURES - is it good enough (was Re: [PATCH v3 1/2] omap: introduce uart_no_empty_fifo_read feature)
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH v3 1/2] omap: introduce uart_no_empty_fifo_read feature
- From: "Aguirre, Sergio" <saaguirre@xxxxxx>
- Re: [PATCH v3 1/2] omap: introduce uart_no_empty_fifo_read feature
- From: Nishanth Menon <nm@xxxxxx>
- RE: VDD1 voltage after resume from idle
- From: "Premi, Sanjeev" <premi@xxxxxx>
- [PATCH v3 2/2] omap: serial: fix non-empty uart fifo read abort
- From: Vikram Pandita <vikram.pandita@xxxxxx>
- [PATCH v3 0/2] omap: serial: handle abort on empty rx fifo read
- From: Vikram Pandita <vikram.pandita@xxxxxx>
- [PATCH v3 1/2] omap: introduce uart_no_empty_fifo_read feature
- From: Vikram Pandita <vikram.pandita@xxxxxx>
- Re: [PATCHV2 3/4] OMAP3: Correct width for CLKSEL Fields
- From: Nishanth Menon <nm@xxxxxx>
- RE: VDD1 voltage after resume from idle
- From: "Menon, Nishanth" <nm@xxxxxx>
- RE: [PATCHV2 3/4] OMAP3: Correct width for CLKSEL Fields
- From: "Aguirre, Sergio" <saaguirre@xxxxxx>
- RE: VDD1 voltage after resume from idle
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: VDD1 voltage after resume from idle
- From: "Menon, Nishanth" <nm@xxxxxx>
- VDD1 voltage after resume from idle
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [PATCHV2 2/4] OMAP3: Clock Type change for OMAP3 Clocks
- From: Nishanth Menon <nm@xxxxxx>
- [PATCHV2 4/4] OMAP3: add support for 192Mhz sgx clock
- From: Vishwanath BS <vishwanath.bs@xxxxxx>
- [PATCHV2 2/4] OMAP3: Clock Type change for OMAP3 Clocks
- From: Vishwanath BS <vishwanath.bs@xxxxxx>
- [PATCHV2 3/4] OMAP3: Correct width for CLKSEL Fields
- From: Vishwanath BS <vishwanath.bs@xxxxxx>
- [PATCHV2 1/4] OMAP3: introduce DPLL4 Jtype
- From: Vishwanath BS <vishwanath.bs@xxxxxx>
- [PATCHV2 0/4] OMAP3: Clock changes for OMAP3630
- From: Vishwanath BS <vishwanath.bs@xxxxxx>
- Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- RE: [PATCH] V4L2: clear buf when vrfb buf not allocated
- From: "Y, Kishore" <kishore.y@xxxxxx>
- [PATCH 5/5] ZOOM3: DSS2: zoom3 defconfig changes to enable dss2
- From: "Y, Kishore" <kishore.y@xxxxxx>
- [PATCH 4/5] ZOOM2: DSS2: zoom2 defconfig changes to enable dss2
- From: "Y, Kishore" <kishore.y@xxxxxx>
- [PATCH 3/5] ZOOM: DSS2: Mux changes to enable zoom display
- From: "Y, Kishore" <kishore.y@xxxxxx>
- [PATCH 2/5] ZOOM: DSS2: Add nec panel for zoom display
- From: "Y, Kishore" <kishore.y@xxxxxx>
- [PATCH 0/5] ZOOM: DSS2: Enable display on zoom2 and zoom3
- From: "Y, Kishore" <kishore.y@xxxxxx>
- [PATCH 1/5] ZOOM: DSS2: changes in zoom board file for display support
- From: "Y, Kishore" <kishore.y@xxxxxx>
- Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
- From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
- Re: DSS2 DSI Sync
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
- From: Jarkko Nikula <jhnikula@xxxxxxxxx>
- RE: [PATCH 4/4] OMAP3: add support for 192Mhz sgx clock
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
- From: Govindraj <govindraj.ti@xxxxxxxxx>
- Re: linux-next: manual merge of the input tree with the omap tree
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH] USB: twl4030: Enable USB regulators before enabling USB charging
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- RE: [PATCH V4 3/3] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: <kalle.jokiniemi@xxxxxxxxx>
- Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
- RE: [PATCH 2/8] Board file of Always Innovating OMAP3-based Touch Book
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- RE: [PATCH 7/8] Video driver of Always Innovating OMAP3-based Touch Book
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
- From: Nishanth Menon <nm@xxxxxx>
- linux-next: omap tree misaplied patch
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- NULL pointer dereference with 2.6.31 on OMAP2430
- From: Chris Banker <cbanker@xxxxxxxxx>
- Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- Re: [PATCH 3/8] Freescale MMA7455 accelerometer driver
- From: Jonathan Cameron <jic23@xxxxxxxxx>
- Re: [PATCH 7/8] OMAP: omap_device: warn about expected latencies only if non-zero
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] USB: twl4030: Enable USB regulators before enabling USB charging
- From: "Aguilar Pena, Leed" <leed.aguilar@xxxxxx>
- Error in Compiling the kernel
- From: tarek attia <tarek.m.attia@xxxxxxxxx>
- Re: [PATCH 5/8] HID file for Always Innovating OMAP3-based Touch Book keyboard
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- [PATCH 8/8] Additional file for Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 7/8] Video driver of Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 6/8] Audio driver of Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 5/8] HID file for Always Innovating OMAP3-based Touch Book keyboard
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 4/8] Driver for Always Innovating OMAP3-based Touch Book keyboard
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 3/8] Freescale MMA7455 accelerometer driver
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 2/8] Board file of Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 1/8] defconfig file of Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 0/8] AI TB: Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 1/2] ARM: Implemented support for VFP PM context saving
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- [PATCH 2/2] OMAP3: Implemented VFP restore/save context
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- [PATCH 0/2] VFP context save/restore support for OMAP3
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- RE: [PATCH 3/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic
- From: "G.N, Vijayakumar" <vijaykumar.gn@xxxxxx>
- [PATCH 3/3] AM3517: Add support for TSC2004 driver
- [PATCH 2/3] Input:TouchScreen: Introduce TSC2004 driver support
- [PATCH 1/3] Mux configuration for AM3517 TouchScreen support
- [PATCH 0/3] Introducing TouchScreen TSC2004 driver support
- Re: [PATCH-v6 2/4] OMAP3: Add support for NAND on ZOOM/LDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- Re: [PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- [PATCH-v6 1/4] OMAP2/3: Add support for flash on SDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- Re: [PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH-v6 2/4] OMAP3: Add support for NAND on ZOOM/LDP boards
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH-v6 4/4] OMAP: 3430SDP: Enable NAND in defconfig
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- [PATCH-v6 3/4] OMAP: Zoom2: Enable NAND and JFFS2 support in defconfig
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- [PATCH-v6 2/4] OMAP3: Add support for NAND on ZOOM/LDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- Re: [PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- [PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- RE: [PATCH 9/9 v2] omap3: pm: introduce 3630 opps
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- Re: [PATCH 3/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: [PATCH 2/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: [PATCH 1/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic
- From: "Menon, Nishanth" <nm@xxxxxx>
- [PATCH 3/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic
- From: "G.N, Vijayakumar" <vijaykumar.gn@xxxxxx>
- [PATCH 2/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic
- From: "G.N, Vijayakumar" <vijaykumar.gn@xxxxxx>
- [PATCH 1/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic
- From: "G.N, Vijayakumar" <vijaykumar.gn@xxxxxx>
- [PATCH 0/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic
- From: "G.N, Vijayakumar" <vijaykumar.gn@xxxxxx>
- Re: [PATCH-v5 2/4] OMAP3: Add support for NAND on ZOOM2/LDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- Re: [PATCH-v5 1/4] OMAP2/3: Add support for flash on SDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- Re: [PATCH 5/8] AI TB: HID file for Always Innovating OMAP3-based Touch Book keyboard
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- RE: [PATCH 0/8] musb: Add structure 'musb_hdrc_board_data'
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- [PATCH 8/8] AI TB: Additional files for Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 7/8] AI TB: Video driver of Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 6/8] AI TB: Audio driver of Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 5/8] AI TB: HID file for Always Innovating OMAP3-based Touch Book keyboard
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 4/8] AI TB: Driver for Always Innovating OMAP3-based Touch Book keyboard
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 2/8] AI TB: Board file of Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- Re: linux-next: manual merge of the input tree with the omap tree
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- linux-next: manual merge of the input tree with the omap tree
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- Re: [PATCH 05/12] omap3evm: Add board revision function, v2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Problem trying to pull particular commit from PM tree
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] OMAP3: Clock changes for OMAP3630
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] [mmc-omap] Add support for 16-bit and 32-bit registers
- From: Ladislav Michl <Ladislav.Michl@xxxxxxxxx>
- Re: Problem trying to pull particular commit from PM tree
- From: Gary Thomas <gary@xxxxxxxxxxxx>
- Re: Problem trying to pull particular commit from PM tree
- From: Peter Barada <peterb@xxxxxxxxxxx>
- [GIT PULL] omap fixes for v2.6.32-rc7
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] OMAP: timekeeping: time should not stop during suspend
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] [mmc-omap] Add support for 16-bit and 32-bit registers
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH 9/9 v2] omap3: pm: introduce 3630 opps
- From: Jon Hunter <jon-hunter@xxxxxx>
- Re: [PATCH] OMAP: Exporting functions doing common register access
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 10/10] omap: mailbox: OMAP4 Mailbox-driver Patch to support tasklet implementation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 09/10] omap: mailbox: OMAP4 Mailbox Patch to change the IRQ flag from IRQF_DISABLED to IRQF_SHARED
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 08/10] omap: mailbox: Adds code changes to support OMAP4 mailbox
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 07/10] omap: mailbox: Expose omap_mbox_enable()/disable_irq()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 06/10] omap: mailbox: remove unnecessary arg for omap_mbox_msg_send
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 05/10] omap: mailbox: remove disable_/enable_mbox_irq in isr
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 04/10] omap: mailbox: remove class interface
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 03/10] omap: mailbox: remove sequence bit checking
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 02/10] omap: mailbox: Add resources and mailbox register base address for OMAP4 mailbox
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 01/10] omap: mailbox: Add build specific changes to support omap mailbox
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 00/10] Omap mailbox updates for omap4 for 2.6.33
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 8/10 v3] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v2] OMAP: timekeeping: time should not stop during suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
- From: "Wang, Jane" <jwang@xxxxxx>
- Re: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [patch 3/3] OMAP: cs should be positive in gpmc_cs_free()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [patch 1/3] omap: fix unlikely(x) < y
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- Re: [PATCH V2] FIX OMAP3:McBSP poll read and write for OMAP3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] [mmc-omap] Add support for 16-bit and 32-bit registers
- From: Ladislav Michl <Ladislav.Michl@xxxxxxxxx>
- Re: [PATCH-v5 2/4] OMAP3: Add support for NAND on ZOOM2/LDP boards
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH] omap3: zoom2/3: make MMC slot work again
- From: "Madhusudhan" <madhu.cr@xxxxxx>
- Re: [PATCH-v5 1/4] OMAP2/3: Add support for flash on SDP boards
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Problem trying to pull particular commit from PM tree
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/4] OMAP3: add support for 192Mhz sgx clock
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH-v5 1/4] OMAP2/3: Add support for flash on SDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- RE: [PATCH] V4L2: clear buf when vrfb buf not allocated
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: [PATCH 2/8] OMAP: hwmod: warn on missing clockdomain
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 03/04] ARM: OMAP: Rename twl4030_ in rtc-twl.c to make it generic rtc
- From: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
- Re: [PATCH 4/8] OMAP: omap_device: deactivate latency typo
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH-v5 2/4] OMAP3: Add support for NAND on ZOOM2/LDP boards
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- Re: [PATCH 5/8] OMAP: omap_device: add usecounting
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP: Exporting functions doing common register access
- From: Jarkko Nikula <jhnikula@xxxxxxxxx>
- Problem trying to pull particular commit from PM tree
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Re: [PATCH 0/8] musb: Add structure 'musb_hdrc_board_data'
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH 4/4] OMAP3: add support for 192Mhz sgx clock
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- Re: [PATCH] OMAP3: PM: Force write last pad config register into save area
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/4] OMAP3: Clock Type change for OMAP3 Clocks
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- [PATCH 1/4] OMAP3: introduce DPLL4 Jtype
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- [PATCH 0/4] OMAP3: Clock changes for OMAP3630
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- RE: [PATCH] OMAP3: PM: Force write last pad config register into save area
- From: "Gopinath, Thara" <thara@xxxxxx>
- [PATCH] V4L2: clear buf when vrfb buf not allocated
- From: "Y, Kishore" <kishore.y@xxxxxx>
- [PATCH] omap3: zoom2/3: make MMC slot work again
- From: Anand Gadiyar <gadiyar@xxxxxx>
- Re: [alsa-devel] [PATCH (for-next 2)] ASoC: Add support for IGEP v2
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ASoC: Correcting the config options in soc/omap/Makefile
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] OMAP3: PM: Force write last pad config register into save area
- From: <Tero.Kristo@xxxxxxxxx>
- Re: [PATCH 8/10 v3] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Query: Enabling DEBUG_LL on Zoom2/3 boards
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- [PATCH 4/4] OMAP3 hwmod: drop most of the OCP_SYSCONFIG.CLOCKACTIVITY code
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 3/4] OMAP hwmod: add names to module MPU IRQ lines
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 2/4] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/4] OMAP3 hwmod: reprogram OCP_SYSCONFIG register after setting SOFTRESET
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/4] OMAP hwmod improvements for 2.6.33
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 7/8] OMAP: omap_device: warn about expected latencies only if non-zero
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 2/8] OMAP: hwmod: warn on missing clockdomain
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 6/8] OMAP: omap_device: use read_persistent_clock() instead of getnstimeofday()
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 1/8] OMAP3: clock: add clockdomains for UART1 & 2
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 8/8] OMAP: omap_device: use UINT_MAX for default wakeup latency limit
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 4/8] OMAP: omap_device: deactivate latency typo
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 5/8] OMAP: omap_device: add usecounting
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: [PATCH] OMAP: Exporting functions doing common register access
- From: Paul Walmsley <paul@xxxxxxxxx>
- Error detecting mmc card on zoom3
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH (for-next 2)] ASoC: Add support for IGEP v2
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- [PATCH] ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2
- From: "Reddy, Teerth" <teerth@xxxxxx>
- RE: [PATCH] ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH (for-next 2)] ASoC: Add support for IGEP v2
- From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
- [PATCH 8/10 v3] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
- From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
- RE: [alsa-devel] Artifacts present in AIC23 capture for 48 KHz sampling rate
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- Re: [PATCH (for-next)] ASoC: Add support for IGEP v2
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- RE: [PATCH (for-next)] ASoC: Add support for IGEP v2
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH (for-next)] ASoC: Add support for IGEP v2
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- RE: [PATCH V2] FIX OMAP3:McBSP poll read and write for OMAP3
- From: "Varadarajan, Charu Latha" <charu@xxxxxx>
- RE: [PATCH] ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- RE: [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
- From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
- [PATCH] ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2
- From: "Reddy, Teerth" <teerth@xxxxxx>
- RE: Scalling_setspeed doesn't work
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- [PATCH] ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2
- From: "Reddy, Teerth" <teerth@xxxxxx>
- Re: [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling
- From: Vimal Singh <vimal.newwork@xxxxxxxxx>
- Re: [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- RE: [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
- From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
- Re: [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- RE: [PATCH] OMAP: Exporting functions doing common register access
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- RE: [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- RE: [PATCH 2/8] musb: Get power (mA) from board data
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- RE: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- RE: [PATCH 3/8] musb: Update musb_init() call for all OMAP3 boards
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- Re: Is the OMAP patch process badly flawed?
- From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- [PATCH 8/8] OMAP: omap_device: use UINT_MAX for default wakeup latency limit
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/8] OMAP: hwmod: warn on missing clockdomain
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 7/8] OMAP: omap_device: warn about expected latencies only if non-zero
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/8] OMAP3: clock: add clockdomains for UART1 & 2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 6/8] OMAP: omap_device: use read_persistent_clock() instead of getnstimeofday()
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 5/8] OMAP: omap_device: add usecounting
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 4/8] OMAP: omap_device: deactivate latency typo
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 0/8] omap_hwmod/omap_device prep work
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: linux-next: manual merge of the omap_dss2 tree with the omap tree
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- [PATCH v2] OMAP: timekeeping: time should not stop during suspend
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort
- From: Vikram Pandita <vikram.pandita@xxxxxx>
- [PATCH 12/12] AM35xx: Defconfig for AM3517 EVM board
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 11/12] AM35xx: Add support for AM3517 EVM board
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 10/12] omap3: Add defconfig for IGEP v2 board
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 09/12] omap: 3630sdp: defconfig creation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 08/12] omap: 3630sdp: introduce 3630 sdp board support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 07/12] omap3: Add minimal IGEP v2 support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 06/12] omap3: Add CompuLab CM-T35 defconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 05/12] omap3: Add CompuLab CM-T35 board support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 04/12] omap3: rx51: Add wl1251 wlan driver support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 03/12] omap3: rx51: Add SDRAM init
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 02/12] omap1: Add default kernel configuration for Herald
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 01/12] omap1: Add board support and LCD for HTC Herald
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 00/12] New omap boards and rx51/n900 updates for 2.6.33
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 2/3] OMAP3: Clock: Fixed dpll3_m2x2 rate calculation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 1/3] OMAP3 clock: Fix the DPLL freqsel computations
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Is the OMAP patch process badly flawed?
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: Is the OMAP patch process badly flawed?
- From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
- RE: [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] omap: serial: fix non-empty rx uart fifo abort
- From: Vikram Pandita <vikram.pandita@xxxxxx>
- [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag
- From: Vikram Pandita <vikram.pandita@xxxxxx>
- Re: [alsa-devel] Artifacts present in AIC23 capture for 48 KHz sampling rate
- From: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Force write last pad config register into save area
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors
- From: Paul Walmsley <paul@xxxxxxxxx>
- [APPLIED] [PATCH v2] rx51: add wl1251 wlan driver support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH (for-next)] ASoC: Add support for IGEP v2
- From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
- [APPLIED] [PATCH 10/10] omap mailbox: OMAP4 Mailbox-driver Patch to support tasklet implementation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH] OMAP3: PM: Force write last pad config register into save area
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH] OMAP3: PM: Force write last pad config register into save area
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 2/2] omap: serial: fix non-empty rx uart fifo abort
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 7/10] omap mailbox: expose omap_mbox_enable()/disable_irq()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Scalling_setspeed doesn't work
- From: tarek attia <tarek.m.attia@xxxxxxxxx>
- [PATCH] OMAP3: PM: Force write last pad config register into save area
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- Re: [PATCH 3/8] musb: Update musb_init() call for all OMAP3 boards
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH] OMAP3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards
- From: Manjunatha GK <manjugk@xxxxxx>
- Win FREE OMAP L 138 based HawkBoard !!!
- From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
- [PATCH 2/2] ASoC: Modifying the license string GPLv2 for OMAP3 EVM
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- [PATCH 1/2] ASoC: Correcting the config options in soc/omap/Makefile
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- Re: [PATCH 8/8] musb: set 'extvbus = 0' for Blackfin boards
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH v2] rx51: add wl1251 wlan driver support
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH 7/8] musb: set 'extvbus = 0' for Davinci boards
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH 6/8] musb: set 'extvbus = 0' for OMAP3 boards
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH 1/8] musb: Add structure to get board specific data
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH 2/8] musb: Get power (mA) from board data
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- Re: [PATCH 1/8] musb: Add structure to get board specific data
- From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
- [PATCH 3/8] musb: Update musb_init() call for all OMAP3 boards
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH 8/8] musb: set 'extvbus = 0' for Blackfin boards
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH 7/8] musb: set 'extvbus = 0' for Davinci boards
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH 2/8] musb: Get power (mA) from board data
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH 1/8] musb: Add structure to get board specific data
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH 6/8] musb: set 'extvbus = 0' for OMAP3 boards
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH 5/8] musb: Add 'extvbus' in musb_hdrc_board_data
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- [PATCH 0/8] musb: Add structure 'musb_hdrc_board_data'
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- RE: Is the OMAP patch process badly flawed?
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
- From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
- [RFC] [PATCH] V4L2: Allow rotation between stream off-on
- From: "Y, Kishore" <kishore.y@xxxxxx>
- [RFC] [PATCH] omap_vout: Change allocated buffer to only needed size
- From: "Y, Kishore" <kishore.y@xxxxxx>
- [RFC] [PATCH] omap_vout: default colorspace for RGB565 set to SRGB
- From: "Y, Kishore" <kishore.y@xxxxxx>
- Re: Is the OMAP patch process badly flawed?
- From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
- insmod on beagleboard
- From: tarek attia <tarek.m.attia@xxxxxxxxx>
- Re: OMAP3515 vs 3525 inversion
- From: Sergey Lapin <slapinid@xxxxxxxxx>
- RE: OMAP3515 vs 3525 inversion
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: Is the OMAP patch process badly flawed?
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Is the OMAP patch process badly flawed?
- From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
- RE: Artifacts present in AIC23 capture for 48 KHz sampling rate
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- RE: [PATCH 8/10] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox
- From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
- RE: [PATCH 7/10] omap mailbox: expose omap_mbox_enable()/disable_irq()
- From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
- Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- RE: [PATCH 5/6] OMAP: Powerdomains: Add support for checking if pwrdm can idle
- From: <Tero.Kristo@xxxxxxxxx>
- RE: [PATCH 6/6] OMAP3: CPUidle: Added peripheral pwrdm checks into bm check
- From: <Tero.Kristo@xxxxxxxxx>
- RE: [PATCH 4/6] OMAP3: PM: Removed PER + CORE state hacking from omap_sram_idle
- From: <Tero.Kristo@xxxxxxxxx>
- RE: [PATCH 2/6] OMAP3: PM: Added support for INACTIVE and ON states for powerdomains
- From: <Tero.Kristo@xxxxxxxxx>
- Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: linux-next: manual merge of the omap_dss2 tree with the omap tree
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: [PATCH 1/1] DSPBRIDGE: cache operation against kernel address instead of user's
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Re: TFTP on beagle board
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
- RE: [PATCH] OMAP: Exporting functions doing common register access
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- [PATCH v2] AM35xx: Clock table updates for AM3505/17
- From: Ranjith Lohithakshan <ranjithl@xxxxxx>
- RE: Doubts around SoC audio on omap3
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- RE: [PATCH 05/12] omap3evm: Add board revision function
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: linux-next: manual merge of the omap_dss2 tree with the omap tree
- From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
- TFTP on beagle board
- From: Mai Daftedar <mai.daftedar@xxxxxxxxx>
- Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 14/12] omap: zoom2: update defconfig for LL_DEBUG_NONE
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 13/12] omap: zoom3: defconfig creation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] omap: Fix keymap for zoom2 according to matrix keypad framwork
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 12/12] omap3: zoom: Introduce zoom3 board support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 11/12] omap3: zoom: Drop i2c-1 speed to 2400
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 10/12] omap3: zoom: rename zoom2 name to generic zoom
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 09/12] omap3: zoom: split board file for software reuse
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 08/12] omap3evm: MIgrate to smsc911x ethernet driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 07/12] omap3evm: Initialize vmmc and vmmc_aux regulators
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 06/12] omap3evm: ehci: Update EHCI support on OMAP3EVM (Rev >= E)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 05/12] omap3evm: Add board revision function
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 04/12] omap3: Update 3430SDP defconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 03/12] omap3: defconfigs: remove SYSFS_DEPRECATED flag
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 02/12] omap: GPIO module enable/disable
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 01/12] omap: Cleanup the coding style in id.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 00/12] Mostly board updates for 2.6.33 merge window
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag
- From: Vikram Pandita <vikram.pandita@xxxxxx>
- [PATCH 2/2] omap: serial: fix non-empty rx uart fifo abort
- From: Vikram Pandita <vikram.pandita@xxxxxx>
- Re: [v3, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- Re: [v3, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35
- From: Mike Rapoport <mike.rapoport@xxxxxxxxx>
- Re: [PATCH 2/5] AI TB: Board file of the Always Innovating OMAP3-based Touch Book.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP: Exporting functions doing common register access
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 0/7] musb: Add structure 'musb_hdrc_board_data'
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Some patches need reposting, inbox cleared, patchwork cleared
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Modifying the kernel keymap
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/3] htcherald: Modify Makefiles and Kconfig for HTC Herald
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH v3 for-next] OMAP: DMA: Use some define rather than a
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3 for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- [APPLIED] [PATCH 3/3] htcherald: Add default kernel configuration for Herald
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 5/6] OMAP: Powerdomains: Add support for checking if pwrdm can idle
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 6/6] OMAP3: CPUidle: Added peripheral pwrdm checks into bm check
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/6] OMAP3: PM: Removed PER + CORE state hacking from omap_sram_idle
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/6] OMAP3: PM: Added support for INACTIVE and ON states for powerdomains
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/6] Idle status patches revisited
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: linux-next: manual merge of the omap_dss2 tree with the omap tree
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 26/32] OMAP3: PM debug: allow runtime toggle of PM features
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Doubts around SoC audio on omap3
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- Re: [PATCH v3] [OMAP3_PM] Fix zoom2/zoom3 build error
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCHV3] OMAP3: PM: Removing redundant and potentially dangerous PRCM configration
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] input: touchscreen: introduce tsc2005 driver
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH] OMAP: Exporting functions doing common register access
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- Re: [PATCH] omap3: ehci: Add regulator framework
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3] [OMAP3_PM] Fix zoom2/zoom3 build error
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH v3] [OMAP3_PM] Fix zoom2/zoom3 build error
- From: Manjunatha GK <manjugk@xxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35
- From: Steve Sakoman <steve@xxxxxxxxxxx>
- Re: [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
- From: Frédéric BEGOU <fbegou@xxxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35
- From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- RE: [PATCH] omap3: ehci: Add regulator framework
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35
- From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
- [PATCH] ASoC: OMAP: enable Overo driver for CM-T35
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 2/3] OMAP3: Clock: Fixed dpll3_m2x2 rate calculation
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/3] OMAP3 clock: Fix the DPLL freqsel computations
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/3] OMAP clock and PM architecture fixes for 2.6.32-rc6
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH v2 1/2] input: touchscreen: introduce tsc2005 driver
- From: Phil Carmody <ext-phil.2.carmody@xxxxxxxxx>
- RE: Some patches need reposting, inbox cleared, patchwork cleared
- From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
- [PATCHV3] OMAP3: PM: Removing redundant and potentially dangerous PRCM configration
- From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
- OMAP3515 vs 3525 inversion
- From: Sergey Lapin <slapinid@xxxxxxxxx>
- Re: linux-next: manual merge of the omap_dss2 tree with the omap tree
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- RE: Dose OMAP3 support split transfer?
- From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
- Re: [PATCH 00/19] OMAP: DSS2: Intro
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- linux-next: manual merge of the omap_dss2 tree with the omap tree
- From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
- [PATCH 5/5] AI TB: Additional modifications for the Always Innovating OMAP3-based Touch Book, including video and sound.
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 4/5] AI TB: Driver for the Always Innovating Touch Book keyboard.
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 3/5] AI TB: Driver for the Freescale MMA7455L accelerometer
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 2/5] AI TB: Board file of the Always Innovating OMAP3-based Touch Book.
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 1/5] AI TB: Defconfig file of the Always Innovating OMAP3-based Touch Book.
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- [PATCH 0/5] AI TB: Always Innovating OMAP3-based Touch Book
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- RE: [PATCH] omap3: ehci: Add regulator framework
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- [PATCH 2/2] OMAP: ams_delta_defconfig: enable LCD class device support
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
- [PATCH 1/2] omapfb: lcd_ams_delta: add support for contrast control
- From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]