Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH (for-next-vol2)] [OMAP] htcherald: Update defconfig to include mux support
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• [PATCH] omap: pandora: board file updates for .33
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH v2 01/20] DSPBRIDGE: driver version 0.1
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH 0/2] [RESEND] Amstrad Delta: add support for LCD contrast
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v5] OMAP1: LCD_DMA: Use some define rather than a hexadecimal constant for LCD register
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [RFC][RFT][PATCH 3/4 v5b] OMAP: McBSP: Introduce caching in register write operations
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 3/4 v5a] OMAP: McBSP: Introduce caching in register write operations
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• dspbridge sync proposal for 0.1
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH v3] omap: serial: fix non-empty uart fifo read abort
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [APPLIED] [PATCH] OMAP3: id code detection 3525 vs 3515
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] [OMAP1] use gen_nand
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 3/3] [OMAP] HTCHERALD: Add USB configuration to HTC Herald
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 2/3] [OMAP] USB: Add omap7xx-specific pin muxing
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/3] [OMAP1] MUX: Add omap7xx-specific USB mux pins
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] OMAP: DMA: move LCD related code from plat-omap to mach-omap1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap3: rx51: Use wl1251 in SPI mode 3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix include problem. Signed-off-by: Marek Belisko <marek.belisko@xxxxxxxxx>
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] Fix include problem. Signed-off-by: Marek Belisko
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/4]: OMAP: ZOOM: Introducing 'board-zoom-flash.c' for NAND init in ZOOM boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2]: OMAP: SDP: Introducing 'board-sdp-flash.c' for flash init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap3: zoom2/3: make MMC slot work again
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2]: Introducing 'gpmc-nand.c' for GPMC specific NAND init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap3: zoom2/3: make MMC slot work again
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer
  • From: Chris Hudson <chudson@xxxxxxxxxx>
• Re: [PATCH v2] omap: serial: fix non-empty uart fifo read abort
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• Re: [PATCH 3/4 v4] OMAP: McBSP: Introduce caching in register write operations
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH v2] omap: serial: fix non-empty uart fifo read abort
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH]OMAP3 PM: Fix for DSP Crash at OPP 1 and 2 under DVFS+SR operation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] omap: serial: fix non-empty uart fifo read abort
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• What's in omap git tree for 2.6.33
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2]: Introducing 'gpmc-nand.c' for GPMC specific NAND init
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• Re: [PATCH 2/2]: Introducing 'gpmc-nand.c' for GPMC specific NAND init
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH 2/2]: Introducing 'gpmc-nand.c' for GPMC specific NAND init
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 2/2]: Introducing 'gpmc-nand.c' for GPMC specific NAND init
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 3/4 v4] OMAP: McBSP: Introduce caching in register write operations
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: [PATCH]OMAP3 PM: Fix for DSP Crash at OPP 1 and 2 under DVFS+SR operation
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH]OMAP3 PM: Fix for DSP Crash at OPP 1 and 2 under DVFS+SR operation
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• RE: [PATCH]OMAP3 PM: Fix for DSP Crash at OPP 1 and 2 under DVFS+SR operation
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH] PM: Prevent direct cpufreq scaling during initialization
  • From: Romit Dasgupta <romit@xxxxxx>
• RE: [PATCH]OMAP3 PM: Fix for DSP Crash at OPP 1 and 2 under DVFS+SR operation
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• RE: [PATCH]OMAP3 PM: Fix for DSP Crash at OPP 1 and 2 under DVFS+SR operation
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 0/8] OMAP clock: convert static definitions in header files to C files
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 0/8] OMAP clock: convert static definitions in header files to C files
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• [PATCH]OMAP3 PM: Fix for DSP Crash at OPP 1 and 2 under DVFS+SR operation
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHv2 6/6] OMAP3: CPUidle: Added peripheral pwrdm checks into bm check
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCHv2 3/6] OMAP3: CPUidle: Fixed support for ON / INACTIVE states
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCHv2 5/6] OMAP: Powerdomains: Add support for checking if pwrdm/clkdm can idle
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCHv2 4/6] OMAP3: PM: Removed pwrdm state hacking from omap_sram_idle
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCHv2 1/6] OMAP: Powerdomains: Add support for INACTIVE state on pwrdm level
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCHv2 0/6] Idle status patches revisited
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCHv2 2/6] OMAP3: PM: Added support for INACTIVE and ON states for powerdomains
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: [PATCH v3 0/4] OMAP: McBSP: Use register cache
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: Peripheral Power Management
  • From: TAO HU <tghk48@xxxxxxxxxxxx>
• [PATCH] usb: ehci-omap: Update platform header file path
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 3/4 v4] OMAP: McBSP: Introduce caching in register write operations
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: EHCI support on beagleboard missing
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• [PATCH v2] omap: serial: fix non-empty uart fifo read abort
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• Re: Merge plans for 2.6.33 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Merge plans for 2.6.33 merge window
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• RE: [PATCH 2/2] MUSB DMA_INTR register may sometimes read zero when infact there
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH 2/2] MUSB DMA_INTR register may sometimes read zero when infact there
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/4 v4] OMAP: McBSP: Introduce caching in register write operations
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Merge plans for 2.6.33 merge window
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: u-boot for omap3
  • From: "Weng, Wending" <WWeng@xxxxxxxxxxxxxx>
• Re: u-boot for omap3
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• RE: u-boot for omap3
  • From: "Weng, Wending" <WWeng@xxxxxxxxxxxxxx>
• Re: Merge plans for 2.6.33 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: u-boot for omap3
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• u-boot for omap3
  • From: "Weng, Wending" <WWeng@xxxxxxxxxxxxxx>
• RE: Merge plans for 2.6.33 merge window
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: I2C broken on OMAP 2430SDP?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• linux-2.6.28-rc8 wedges in twl_mmc_set_voltage()...
  • From: Peter Barada <peterb@xxxxxxxxxxx>
• Merge plans for 2.6.33 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/4]: OMAP: ZOOM: Introducing 'board-zoom-flash.c' for NAND init in ZOOM boards
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] Fix include problem. Signed-off-by: Marek Belisko <marek.belisko@xxxxxxxxx>
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH v2 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 4/4]: OMAP3: Add support for NAND on LDP board
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 3/4]: OMAP3: Add support for NAND on ZOOM3 board
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 2/4]: OMAP3: Add support for NAND on ZOOM2 board
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 1/4]: OMAP: ZOOM: Introducing 'board-zoom-flash.c' for NAND init in ZOOM boards
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 0/4]: Adding NAND support for LDP/ZOOM boards
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 2/2]: OMAP3: Add support for flash on 3430SDP board
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 1/2]: OMAP: SDP: Introducing 'board-sdp-flash.c' for flash init
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 0/2]OMAP:SDP: Add flash support for SDP boards
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 2/2]: Introducing 'gpmc-nand.c' for GPMC specific NAND init
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 1/2]: Correcting GPMC_CONFIG1_DEVICETYPE_NAND
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 0/2]OMAP: Introducing gpmc-nand.c
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH 04/10] OMAP3 hwmod: drop most of the OCP_SYSCONFIG.CLOCKACTIVITY code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 05/10] OMAP: omap_device: add to_omap_device() macro
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 06/10] OMAP: omap_device: use UINT_MAX for default wakeup latency limit
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 00/10] OMAP: omap_hwmod/omap_device patches for 2.6.33
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 01/10] OMAP3 hwmod: reprogram OCP_SYSCONFIG register after setting SOFTRESET
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 09/10] OMAP: omap_device: fix nsec/usec conversion in latency calculations
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 03/10] OMAP hwmod: add names to module MPU IRQ lines
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 08/10] OMAP: hwmod: warn on missing clockdomain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 10/10] OMAP: omap_device: track latency in nanoseconds
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 07/10] OMAP: omap_device: use read_persistent_clock() instead of getnstimeofday()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 02/10] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 9/9] OMAP clock/hwmod: fix off-by-one errors
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/9] OMAP powerdomain/PM: use symbolic constants for the max number of power states
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 8/9] OMAP3: PM: Fix for MPU power domain MEM BANK position
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 6/9] OMAP2/3 powerdomain: return errors rather than returning the output of IS_ERR()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 7/9] OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 5/9] OMAP powerdomain: rearrange struct powerdomain to save some memory
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/9] OMAP clockdomain/powerdomain: optimize out sleepdep code on OMAP24xx
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/9] OMAP clockdomain/powerdomain: remove CONFIG_OMAP_DEBUG_{CLOCK, POWER}DOMAIN
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/9] OMAP2/3 PRCM: don't export prm_*(), cm_*() functions
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/9] Minor powerdomain/clockdomain/SDRC patches for 2.6.33
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2] OMAP3: SDRC: Comment out SDRC AC timing and MR changes in CORE DVFS SRAM code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCHv2 0/2] VFP context save/restore for OMAP3
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCHv2 1/2] ARM: VFP: Fixed suspend and added context save support
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCHv2 2/2] OMAP3: Implemented VFP restore/save context
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH] Fix include problem. Signed-off-by: Marek Belisko <marek.belisko@xxxxxxxxx>
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH] OMAP3 : Fix I2C lockup during timeout/error cases
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: I2C broken on OMAP 2430SDP?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH V2] OMAP3: PM: Fix for MPU power domain MEM BANK position
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 0/4] OMAP: McBSP: Use register cache
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 4/4 v4] OMAP: McBSP: Use cache when modifying individual register bits
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 3/4 v4] OMAP: McBSP: Introduce caching in register write operations
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v2 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] OMAP: hwmod: warn on missing clockdomain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2 v2] musb: Add context save and restore support
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• [PATCH 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 7/8] OMAP1 clock: convert test in disable_unused() to use ENABLE_ON_INIT
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/8] OMAP2 clock: APLL code shouldn't rely on static clocks in its local namespace
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/8] OMAP2/3: move SDRC macros to mach-omap2/sdrc.h
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/8] OMAP2xxx clock: remove implicit dependency between rate CPU flag and clkdev_omap CPU flag
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/8] OMAP1/2/3 clock: remove paranoid checks in preparation for clock{, 2xxx, 3xxx}_data.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/8] OMAP clock: convert static definitions in header files to C files
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/5] ARM: OMAP4: PM: Complete OMAP4 clock tree modelling
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] PM: Prevent direct cpufreq scaling during initialization
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• Re: [PATCH v3 0/4] OMAP: McBSP: Use register cache
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 2/2] OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc space
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/2] OMAP2xxx IO mapping: mark DSP mappings as being 2420-only
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/2] OMAP2420 IO map: fix IVA map
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3 3/4] OMAP: McBSP: Introduce caching in register write operations
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v3 0/4] OMAP: McBSP: Use register cache
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Mika Westerberg <ext-mika.1.westerberg@xxxxxxxxx>
• RE: [PATCH] PM: Prevent direct cpufreq scaling during initialization
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• Re: SR1: VDD autocomp is not active
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v3] arm: omap: Add omap3_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 9/9] omap: mux: Add 36xx CBP package support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 8/9] omap: mux: Remove old mux code for 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/9] omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/9] omap: Split i2c platform init for mach-omap1 and mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/9] omap: mux: Add debugfs support for new mux code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/9] omap: mux: Add new style init functions to omap3 board-*.c files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/9] omap: mux: Add new style pin multiplexing data for 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/9] omap: mux: Add new style pin multiplexing code for omap3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/9] omap2: mux: intoduce omap_mux_{read,write}
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/9] Omap mux changes for v2.6.33 merge window, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• [RFT/RFC/PATCH 08/10] cbus: separate into several MODULE_AUTHOR entries
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 05/10] cbus: tahvo-usb: make it build again
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: I2C broken on OMAP 2430SDP?
  • From: "Sonasath, Moiz" <m-sonasath@xxxxxx>
• [RFT/RFC/PATCH 10/10] cbus: add platform_data to pass gpios
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 09/10] cbus: move to platform_driver
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 07/10] cbus: move EXPORT_SYMBOL close to its exported symbols
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 06/10] cbus: switch to kzalloc
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 04/10] video: omap: hwa742: make it build again
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 03/10] video: omap: sossi: make it build again
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 01/10] arm: omap1: clock: fix section mismatch
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 02/10] arm: omap: n770: make it build again
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 00/10] cleanups, compile fix, cbus
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [RFT/RFC/PATCH 00/10] several cleanup patches
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 08/10] cbus: separate into several MODULE_AUTHOR entries
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 10/10] cbus: add platform_data to pass gpios
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 07/10] cbus: move EXPORT_SYMBOL close to its exported symbols
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 09/10] cbus: move to platform_driver
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 06/10] cbus: switch to kzalloc
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 05/10] cbus: tahvo-usb: make it build again
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 01/10] arm: omap1: clock: fix section mismatch
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 02/10] arm: omap: n770: make it build again
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 04/10] video: omap: hwa742: make it build again
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 03/10] video: omap: sossi: make it build again
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFT/RFC/PATCH 00/10] several cleanup patches
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: Problems using DSS2 on OMAP3 EVM / Angstrom with rotation
  • From: Eino-Ville Talvala <talvala@xxxxxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• Re: Problems using DSS2 on OMAP3 EVM / Angstrom with rotation
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: Problems using DSS2 on OMAP3 EVM / Angstrom with rotation
  • From: Eino-Ville Talvala <talvala@xxxxxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• RE: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: [PATCH] OMAP3: SDRC: Comment out SDRC AC timing and MR changes in CORE DVFS SRAM code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• RE: [PATCH v2 01/20] DSPBRIDGE: driver version 0.1
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] OMAP3: SDRC: Comment out SDRC AC timing and MR changes in CORE DVFS SRAM code
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] PM: Prevent direct cpufreq scaling during initialization
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• RE: [PATCHv2] mfd: twl4030: clarify the return value for read and write
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: SR1: VDD autocomp is not active
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: SR1: VDD autocomp is not active
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• [PATCHv2] mfd: twl4030: clarify the return value for read and write
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support.
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• Re: [PATCH] mfd: twl4030: clarify the return value for read and write
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: SR1: VDD autocomp is not active
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• [PATCH] mfd: twl4030: clarify the return value for read and write
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• Re: SR1: VDD autocomp is not active
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• RE: SR1: VDD autocomp is not active
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: SR1: VDD autocomp is not active
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• Re: [PATCH v2 01/20] DSPBRIDGE: driver version 0.1
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [PATCH] PM: Prevent direct cpufreq scaling during initialization
  • From: Romit Dasgupta <romit@xxxxxx>
• Re: Peripheral Power Management
  • From: tarek attia <tarek.m.attia@xxxxxxxxx>
• Peripheral Power Management
  • From: tarek attia <tarek.m.attia@xxxxxxxxx>
• Re: FEATURES - is it good enough
  • From: Alexander Shishkin <virtuoso@xxxxxxxxx>
• RE: [PATCH 6/6] ARM: OMAP4: PM: Adds CM1/2 register field masks
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH 3/5] ARM: OMAP4: PM: Move DPLL control apis to dpll.c
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH 2/5] ARM: OMAP4: PM: Basic OMAP4 clock framework
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] OMAP3: SDRC: Comment out SDRC AC timing and MR changes in CORE DVFS SRAM code
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: FEATURES - is it good enough
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: omap3evm: touchscreen delays on pm branch
  • From: Romit Dasgupta <romit@xxxxxx>
• Re: [PATCH v3] arm: omap: Add omap3_defconfig
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PATCH] OMAP3: SDRC: Comment out SDRC AC timing and MR changes in CORE DVFS SRAM code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 7/9] arm: omap: innovator: kill compile warning on board-innovator.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] arm: omap: Add omap3_defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3] arm: omap: Add omap3_defconfig
  • From: Olof Johansson <olof@xxxxxxxxx>
• RE: SR1: VDD autocomp is not active
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH v2 00/20] dspbridge cleanups
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• [PATCH 8/9] arm: omap: perseus: kill compile warning on board-perseus2.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 7/9] arm: omap: innovator: kill compile warning on board-innovator.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH v2 15/20] DSPBRIDGE: trivial cleanup and indentation for io_sm
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: SR1: VDD autocomp is not active
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• RE: Problems using DSS2 on OMAP3 EVM / Angstrom with rotation
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: SR1: VDD autocomp is not active
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH v3 0/2] omap: serial: handle abort on empty rx fifo read
  • From: Alexander Shishkin <virtuoso@xxxxxxxxx>
• RE: omap3evm: touchscreen delays on pm branch
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• I2C broken on OMAP 2430SDP?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [rfc/rft/patch 8/9] arm: omap: perseus: kill compile warning on board-perseus2.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [rfc/rft/patch 7/9] arm: omap: innovator: kill compile warning on board-innovator.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: FEATURES - is it good enough
  • From: Alexander Shishkin <virtuoso@xxxxxxxxx>
• RE: [PATCHV2 1/4] OMAP3: introduce DPLL4 Jtype
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• Re: [PATCH 1/5] ARM: OMAP4: PM: Complete OMAP4 clock tree modelling
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH v3 0/2] omap: serial: handle abort on empty rx fifo read
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: ACPI notifier chain?
  • From: Ameya Palande <ameya.palande@xxxxxxxxx>
• Re: [rfc/rft/patch 3/9] arm: omap: zoom: use vmmc1 regulator supply
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [rfc/rft/patch 3/9] arm: omap: zoom: use vmmc1 regulator supply
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH v3 1/2] arm: a driver for on-chip ETM and ETB
  • From: Alexander Shishkin <virtuoso@xxxxxxxxx>
• RE: [PATCHV3 2/4] OMAP3: Clock Type change for OMAP3 Clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [rfc/rft/patch 8/9] arm: omap: perseus: kill compile warning on board-perseus2.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 0/9] omap warning cleanup
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 7/9] arm: omap: innovator: kill compile warning on board-innovator.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 1/9] arm: omap: kill compile warning in irq.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 9/9] arm: omap: mailbox: kill compile warning in mailbox.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 2/9] arm: omap: remove unused variables
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 3/9] arm: omap: zoom: use vmmc1 regulator supply
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 5/9] arm: omap: kill compile warning on board-4430-sdp.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 6/9] arm: omap: gpio: kill compile warning in gpio.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [rfc/rft/patch 4/9] arm: omap: io: kill compile warning
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: DSS2 Switch between multiple displays
  • From: Ashwin Bihari <abihari@xxxxxxxxx>
• Re: [PATCH 2/3] OMAP: omap_device: track latency in nanoseconds
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/3] OMAP: omap_device: fix nsec/usec conversion in latency calculations
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/5] ARM: OMAP4: PM: Complete OMAP4 clock tree modelling
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/5] ARM: OMAP4: PM: Complete OMAP4 clock tree modelling
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: omap_device: add to_omap_device() macro
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/5] ARM: OMAP4: PM: Move DPLL control apis to dpll.c
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/5] ARM: OMAP4: PM: Complete OMAP4 clock tree modelling
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 5/5] ARM: OMAP4: PM: Add init api for DPLL nodes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 4/5] ARM: OMAP4: PM: Add support for OMAP4 dpll api's
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 2/5] ARM: OMAP4: PM: Basic OMAP4 clock framework
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 0/5] OMAP4 clock framework support
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCHV3 2/4] OMAP3: Clock Type change for OMAP3 Clocks
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• [PATCH 4/6] ARM: OMAP4: PM: Adds PRM register shift and mask bits
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 6/6] ARM: OMAP4: PM: Adds CM1/2 register field masks
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 3/6] ARM: OMAP4: PM: Adds PRM register defs for OMAP4
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/6] ARM: OMAP4: PM: Fix the PRM and CM base addresses
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 5/6] ARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 2/6] ARM: OMAP4: PM: PRM/CM module offsets for OMAP4
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 0/6] Basic OMAP4 PRCM register def series
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• SR1: VDD autocomp is not active
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• Re: linux-2.6.28-rc6-omap1
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• RE: linux-2.6.28-rc6-omap1
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: ACPI notifier chain?
  • From: tarek attia <tarek.m.attia@xxxxxxxxx>
• [PATCH 1/3] OMAP: DSS2: add Toppoly TDO35S panel
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 3/3] omap3: cm-t35: update defconfig for DSS2
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 0/3] omap3: cm-t35: enable display subsystem
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 2/3] omap3: cm-t35: add DSS2 display support
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Mika Westerberg <ext-mika.1.westerberg@xxxxxxxxx>
• linux-2.6.28-rc6-omap1
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• Re: [PATCH] mfd: twl4030: Driver for twl4030 madc module
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: omap3evm: touchscreen delays on pm branch
  • From: Sriram V <vshrirama@xxxxxxxxx>
• Re: ACPI notifier chain?
  • From: Ameya Palande <ameya.palande@xxxxxxxxx>
• Re: DSS2 Switch between multiple displays
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• ACPI notifier chain?
  • From: tarek attia <tarek.m.attia@xxxxxxxxx>
• Re: [PATCH] omap3: mux: add shorthands for OUTPUT_PULL{UP,DOWN}
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/20] dspbridge cleanups
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 15/20] DSPBRIDGE: trivial cleanup and indentation for io_sm
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [RFC][PATCH] DSPBRIDGE: Remove GT_Trace for curTrace mask
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH v2] arm: omap: Add omap3_defconfig
  • From: Olof Johansson <olof@xxxxxxxxx>
• RE: [PATCH v2] arm: omap: Add omap3_defconfig
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [PATCH v2 09/20] DSPBRIDGE: checkpatch - printk() should include KERN_ facility level
  • From: "Menon, Nishanth" <nm@xxxxxx>
• [Resend] [PATCH v3 1/4] OMAP: McBSP: Use macros for all register read/write operations
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v2] arm: omap: Add omap3_defconfig
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PATCH v3 4/4] OMAP: McBSP: Use cache when modifying individual register bits
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v3 3/4] OMAP: McBSP: Introduce caching in register write operations
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v3 2/4] OMAP: McBSP: Prepare register read/write macros API for caching
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v3 1/4] OMAP: McBSP: Use macros for all register read/write operations
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH v3 0/4] OMAP: McBSP: Use register cache
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 0/2] [RESEND] Amstrad Delta: add support for LCD contrast
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: Problems using DSS2 on OMAP3 EVM / Angstrom with rotation
  • From: Eino-Ville Talvala <talvala@xxxxxxxxxxxx>
• Re: [PATCH] omap3: mux: add shorthands for OUTPUT_PULL{UP,DOWN}
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RESEND][PATCH v2 20/20] DSPBRIDGE: Remove DPC object structure
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] omap3: mux: add shorthands for OUTPUT_PULL{UP,DOWN}
  • From: Mike Rapoport <mike.rapoport@xxxxxxxxx>
• [PATCH v2 16/20] DSPBRIDGE: trivial fix for multiline comments on io_sm
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 00/20] dspbridge cleanups
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 19/20] DSPBRIDGE: Remove DPC module from SERVICES layer
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 18/20] DSPBRIDGE: Remove main DPC wrapper for IO and MMUfault
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 10/20] DSPBRIDGE: checkpatch - braces not necessary for single statement blocks
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 08/20] DSPBRIDGE: Checkpatch - line over 80 characters
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 12/20] DSPBRIDGE: checkpatch foo-should-be for pointers
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 01/20] DSPBRIDGE: driver version 0.1
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 20/20] DSPBRIDGE: Remove DPC object structure
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 14/20] DSPBRIDGE: Use _IOxx macro to define ioctls
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 13/20] DSPBRIDGE: Fix multiline macros to use do while
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 11/20] DSPBRIDGE: checkpatch - struct file_operations should normally be const
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 17/20] DSPBRIDGE: Remove DPC, create, destroy and schedule wrappers
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 09/20] DSPBRIDGE: checkpatch - printk() should include KERN_ facility level
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 06/20] DSPBRIDGE: checkpatch - space required before open parenthesis
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 07/20] DSPBRIDGE: checkpatch spacing and indentation
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 15/20] DSPBRIDGE: trivial cleanup and indentation for io_sm
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 05/20] DSPBRIDGE: checkpatch - space required after comma
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• [PATCH v2 02/20] DSPBRIDGE: trivial license fix in tramp and tramp_table_c6000
  • From: Omar Ramirez Luna <omar.ramirez@xxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] omap3: mux: add shorthands for OUTPUT_PULL{UP,DOWN}
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Peter Barada <peterb@xxxxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [OMAP1] use gen_nand
  • From: Brian Swetland <swetland@xxxxxxxxxx>
• DSS2 Switch between multiple displays
  • From: Ashwin Bihari <abihari@xxxxxxxxx>
• Re: [PATCH] [OMAP1] use gen_nand
  • From: Ladislav Michl <Ladislav.Michl@xxxxxxxxx>
• Re: DSS2 panel question
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• Re: [PATCH 1/8] omap2: mux: intoduce omap_mux_{read,write}
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: [PATCH] mfd: twl4030: Driver for twl4030 madc module
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH V2] AM3517: Add support for TSC2004 driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH-v5 2/4] OMAP3: Add support for NAND on ZOOM2/LDP boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: Preventing OMAP3 serial driver to take control of all UARTs
  • From: Peter Barada <peterb@xxxxxxxxxxx>
• Re: [PATCH] Add omap3_defconfig
  • From: Olof Johansson <olof@xxxxxxxxx>
• [RFC PATCH v3 2/3] mach-omap2:kxte9 accelerometer support for OMAP ZoomII
  • From: chudson@xxxxxxxxxx
• [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer
  • From: chudson@xxxxxxxxxx
• [RFC PATCH v3 3/3] mach-omap2:kxte9 accelerometer mux support for OMAP ZoomII
  • From: chudson@xxxxxxxxxx
• Re: [PATCH] mfd: twl4030: Driver for twl4030 madc module
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• RE: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• Re: [PATCHV3 3/4] OMAP3: Correct width for CLKSEL Fields
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHV3 4/4] OMAP3: add support for 192Mhz sgx clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHV2 0/4] OMAP3: Clock changes for OMAP3630
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCHV2 1/4] OMAP3: introduce DPLL4 Jtype
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Preventing OMAP3 serial driver to take control of all UARTs
  • From: Mika Westerberg <ext-mika.1.westerberg@xxxxxxxxx>
• Re: [PATCHV3 2/4] OMAP3: Clock Type change for OMAP3 Clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH] OMAP: I2C: Add mpu wake up latency constraint in i2c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2] OMAP: DMA: move LCD related code from plat-omap to mach-omap1
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH-v5 2/4] OMAP3: Add support for NAND on ZOOM2/LDP boards
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH-v5 2/4] OMAP3: Add support for NAND on ZOOM2/LDP boards
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• RE: [PATCH] Add omap3_defconfig
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: Problems using DSS2 on OMAP3 EVM / Angstrom with rotation
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH] Add omap3_defconfig
  • From: Olof Johansson <olof@xxxxxxxxx>
• Problems trying to boot am3517 w/NFSroot
  • From: Peter Barada <peterb@xxxxxxxxxxx>
• RE: [PATCH 1/8] omap2: mux: intoduce omap_mux_{read,write}
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH 0/8] Series short description
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH] omap3: cm-t35: add mux initialization
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH] omap3: mux: add shorthands for OUTPUT_PULL{UP,DOWN}
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH] omap3: cm-t35: add mux initialization
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [RFC][PATCH v2] OMAP: McBSP: Use register cache
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v2] OMAP: DMA: move LCD related code from plat-omap to mach-omap1
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH] mfd: twl4030: Driver for twl4030 madc module
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] omap: Split i2c platform init for mach-omap1 and mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ASoC: AIC23: Fixing infinite loop in resume path
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] Omap mux changes for v2.6.33 merge window (Series short description)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH] OMAP3: hwmod: support to specify the bit position of clockactivity bits
  • From: Thara Gopinath <thara@xxxxxx>
• Re: [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• [PATCH] power_supply: Add driver for TWL4030/TPS65950 BCI charger
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• RE: [PATCH] ASoC: AIC23: Fixing infinite loop in resume path
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• RE: OMAP3: enabling CPU idle leads to panic
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: OMAP3: enabling CPU idle leads to panic
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• [PATCH v2] OMAP: DMA: move LCD related code from plat-omap to mach-omap1
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] ASoC: AIC23: Fixing infinite loop in resume path
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• [patch] fix OMAP HDQ build failure...
  • From: Daniel J Blueman <daniel.blueman@xxxxxxxxx>
• RE: OMAP3: enabling CPU idle leads to panic
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [PATCH] ASoC: AIC23: Fixing infinite loop in resume path
  • From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
• Re: OMAP3: enabling CPU idle leads to panic
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• Re: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: OMAP3: enabling CPU idle leads to panic
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• Re: OMAP3: enabling CPU idle leads to panic
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• RE: OMAP3: enabling CPU idle leads to panic
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: OMAP3: enabling CPU idle leads to panic
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• Re: omap3evm: touchscreen delays on pm branch
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: omap3evm: touchscreen delays on pm branch
  • From: Romit Dasgupta <romit@xxxxxx>
• RE: [PATCH 1/2] ARM: Implemented support for VFP PM context saving
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: OMAP3: enabling CPU idle leads to panic
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• RE: omap3evm: touchscreen delays on pm branch
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: omap3evm: touchscreen delays on pm branch
  • From: Romit Dasgupta <romit@xxxxxx>
• Re: [PATCH] DSPBRIDGE: Interface tightening to check for invalid
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• RE: omap3evm: touchscreen delays on pm branch
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: omap3evm: touchscreen delays on pm branch
  • From: Romit Dasgupta <romit@xxxxxx>
• Re: [RFC] [PATCH] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set)
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• RE: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• Re: [PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [RFC] [PATCH] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: omap3evm: touchscreen delays on pm branch
  • From: "Hemanth V" <hemanthv@xxxxxx>
• RE: [PATCH] DSPBRIDGE: Interface tightening to check for invalid
  • From: "Ramos Falcon, Ernesto" <ernesto@xxxxxx>
• Re: [PATCH 0/8] Omap mux changes for v2.6.33 merge window (Series short description)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• omap3evm: touchscreen delays on pm branch
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: Enabling HSUSB1 port on OMAP3430 labrador
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: Philby John <pjohn@xxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• Re: Problems using DSS2 on OMAP3 EVM / Angstrom with rotation
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• RE: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• Re: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 0/4] AM3517: MMC: Add support for HSMMC
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• Re: Enabling HSUSB1 port on OMAP3430 labrador
  • From: Kovacs Peter Tamas <p.kovacs@xxxxxxxxxxxxxxx>
• RE: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• Re: [RFC] [PATCH] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set)
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: Problems using DSS2 on OMAP3 EVM / Angstrom with rotation
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 0/9] dspbridge cleanup patches
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [RFC][PATCH v2] OMAP: McBSP: Use register cache
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH] OMAP3: PM: Enable wake-up from McBSP2, 3 and 4 modules
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• RE: [PATCH 2/5] ZOOM: DSS2: Add nec panel for zoom display
  • From: "Y, Kishore" <kishore.y@xxxxxx>
• Re: [PATCH 0/8] Omap mux changes for v2.6.33 merge window (Series short description)
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• RE: [PATCH 1/5] OMAP3: Fixed ARM aux ctrl register save/restore
  • From: "Gopinath, Thara" <thara@xxxxxx>
• [PATCH V2] OMAP3: PM: Fix for MPU power domain MEM BANK position
  • From: Thara Gopinath <thara@xxxxxx>
• Re: Enabling HSUSB1 port on OMAP3430 labrador
  • From: Kovacs Peter Tamas <p.kovacs@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/2 v2] musb: Add context save and restore support
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: DSS2 panel question
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH 1/2 v2] musb: Add context save and restore support
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 1/2 v2] musb: Add context save and restore support
  • From: Romit Dasgupta <romit@xxxxxx>
• Re: [PATCH 0/8] Series short description
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] OMAP: I2C: Add mpu wake up latency constraint in i2c
  • From: <kalle.jokiniemi@xxxxxxxxx>
• Re: [RFC][PATCH v2] OMAP: McBSP: Use register cache
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 2/9] DSPBRIDGE: trivial checkpatch fixes
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 0/8] Series short description
  • From: "Hemanth V" <hemanthv@xxxxxx>
• [PATCH 1/2 v2] musb: Add context save and restore support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: [PATCH 5/9] DSPBRIDGE: trivial cleanup and indentation for io_sm
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• RE: [PATCH V2] AM3517: Add support for TSC2004 driver
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH V2] AM3517: Add support for TSC2004 driver
  • From: hvaibhav@xxxxxx
• [PATCHV2 1/4] OMAP3: introduce DPLL4 Jtype
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV3 4/4] OMAP3: add support for 192Mhz sgx clock
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV3 2/4] OMAP3: Clock Type change for OMAP3 Clocks
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV3 3/4] OMAP3: Correct width for CLKSEL Fields
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCHV2 0/4] OMAP3: Clock changes for OMAP3630
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support.
  • From: Govindraj <govindraj.ti@xxxxxxxxx>
• RE: [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• RE: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• Re: [RFC] [PATCH] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 02/10 V3] omap3: pm: introduce opp accessor functions
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH 0/8] Omap mux changes for v2.6.33 merge window (Series short description)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 8/8] omap: mux: Remove old mux code for 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/8] omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/8] omap: Split i2c platform init for mach-omap1 and mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/8] omap: mux: Add debugfs support for new mux code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/8] omap: mux: Add new style init functions to omap3 board-*.c files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/8] omap: mux: Add new style pin multiplexing data for 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/8] omap: mux: Add new style pin multiplexing code for omap3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/8] omap2: mux: intoduce omap_mux_{read,write}
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/8] Series short description
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/10 V3] omap3: pm: introduce opp accessor functions
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 6/9] DSPBRIDGE: Remove DPC, create, destroy and schedule wrappers
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [RFC] [PATCH] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set)
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 7/9] DSPBRIDGE: Remove main DPC wrapper for IO and MMUfault
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 6/9] DSPBRIDGE: Remove DPC, create, destroy and schedule wrappers
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 0/9] dspbridge cleanup patches
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH 2/9] DSPBRIDGE: trivial checkpatch fixes
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH 5/9] DSPBRIDGE: trivial cleanup and indentation for io_sm
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH 0/9] dspbridge cleanup patches
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH 4/9] DSPBRIDGE: Use _IOxx macro to define ioctls
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] omap3: rx51: Use wl1251 in SPI mode 3
  • From: Kalle Valo <kalle.valo@xxxxxx>
• Re: [PATCH 2/9] DSPBRIDGE: trivial checkpatch fixes
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] omap: dss2: Reintroduce Overo display support (DVI/HDMI)
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 0/9] dspbridge cleanup patches
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH 0/9] dspbridge cleanup patches
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH 02/10 V3] omap3: pm: introduce opp accessor functions
  • From: Nishanth Menon <nm@xxxxxx>
• Re: DSS2 panel question
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [alsa-devel] [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 5/9] DSPBRIDGE: trivial cleanup and indentation for io_sm
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• RE: [PATCH 6/9] DSPBRIDGE: Remove DPC, create, destroy and schedule wrappers
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/9] DSPBRIDGE: Remove DPC, create, destroy and schedule wrappers
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• Re: [PATCH 5/9] DSPBRIDGE: trivial cleanup and indentation for io_sm
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [RFC] [PATCH] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] usb: ehci-omap: Update platform header file path
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci-omap: Update platform header file path
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 06/10 V3] omap3: pm: use opp accessor functions for omap-target
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: DSS2 panel question
  • From: TAO HU <tghk48@xxxxxxxxxxxx>
• Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/9] dspbridge cleanup patches
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: OMAP3: enabling CPU idle leads to panic
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/10 V3] omap3: pm: use opp accessor functions for omap34xx
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/10 V3] omap3: pm: use opp accessor functions for omap34xx
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/10 V3] omap3: pm: introduce opp accessor functions
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] OMAP: I2C: Add mpu wake up latency constraint in i2c
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• Re: OMAP3: enabling CPU idle leads to panic
  • From: Sergey Lapin <slapinid@xxxxxxxxx>
• Re: [PATCH 00/10 v3] omap3: pm: introduce support for 3630 OPPs
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [ANNOUNCE] PM branch updated to v2.6.32-rc8
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] [PATCH] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set)
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] ASoC: AM3517: Fix AIC23 suspend/resume hang
  • From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
• Re: [PATCH] usb: ehci-omap: Update platform header file path
  • From: Greg KH <gregkh@xxxxxxx>
• Re: DSS2 panel question
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH] mfd: twl4030: Driver for twl4030 madc module
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• RE: [ANNOUNCE] PM branch updated to v2.6.32-rc8
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH] usb: ehci-omap: Update platform header file path
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] usb: ehci-omap: Update platform header file path
  • From: Olof Johansson <olof@xxxxxxxxx>
• RE: [PATCH 2/2] usb: ehci: Allow EHCI to be built on OMAP3
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH] usb: ehci-omap: Update platform header file path
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [RFC] [PATCH] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set)
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] usb: ehci-omap: Update platform header file path
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 2/2] usb: ehci: Allow EHCI to be built on OMAP3
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
  • From: Olof Johansson <olof@xxxxxxxxx>
• RE: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH 09/10 V3] omap3: pm: introduce 3630 opps
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 04/10 V3] omap3: pm: srf: use opp accessor functions
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 07/10 V3] omap3: clk: use pm accessor functions for cpufreq table
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 06/10 V3] omap3: pm: use opp accessor functions for omap-target
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 08/10] omap3: pm: remove VDDx_MIN/MAX macros
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 05/10 V3] omap3: pm: sr: replace get_opp with freq_to_opp
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 02/10 V3] omap3: pm: introduce opp accessor functions
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 01/10] omap3: pm: introduce enabled flag to omap_opp
  • From: Nishanth Menon <nm@xxxxxx>