From: Vaibhav Hiremath <hvaibhav@xxxxxx> Changes: - Removed omap_cfg_reg() Reviewed-by: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx> --- arch/arm/mach-omap2/board-am3517evm.c | 61 +++++++++++++++++++++++++++++++++ 1 files changed, 61 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 415a13d..b183d93 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -20,6 +20,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/i2c/tsc2004.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -27,10 +29,64 @@ #include <asm/mach/map.h> #include <plat/board.h> +#include <plat/mux.h> #include <plat/common.h> #include <plat/usb.h> /* + * TSC 2004 Support + */ +#define GPIO_TSC2004_IRQ 65 + +static int tsc2004_init_irq(void) +{ + int ret = 0; + + ret = gpio_request(GPIO_TSC2004_IRQ, "tsc2004-irq"); + if (ret < 0) { + printk(KERN_WARNING "failed to request GPIO#%d: %d\n", + GPIO_TSC2004_IRQ, ret); + return ret; + } + + if (gpio_direction_input(GPIO_TSC2004_IRQ)) { + printk(KERN_WARNING "GPIO#%d cannot be configured as " + "input\n", GPIO_TSC2004_IRQ); + return -ENXIO; + } + + omap_set_gpio_debounce(GPIO_TSC2004_IRQ, 1); + omap_set_gpio_debounce_time(GPIO_TSC2004_IRQ, 0xa); + return ret; +} + +static void tsc2004_exit_irq(void) +{ + gpio_free(GPIO_TSC2004_IRQ); +} + +static int tsc2004_get_irq_level(void) +{ + return gpio_get_value(GPIO_TSC2004_IRQ) ? 0 : 1; +} + +struct tsc2004_platform_data am3517evm_tsc2004data = { + .model = 2004, + .x_plate_ohms = 180, + .get_pendown_state = tsc2004_get_irq_level, + .init_platform_hw = tsc2004_init_irq, + .exit_platform_hw = tsc2004_exit_irq, +}; + +static struct i2c_board_info __initdata am3517evm_tsc_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("tsc2004", 0x4B), + .type = "tsc2004", + .platform_data = &am3517evm_tsc2004data, + }, +}; + +/* * Board initialization */ static struct omap_board_config_kernel am3517_evm_config[] __initdata = { @@ -67,6 +123,11 @@ static void __init am3517_evm_init(void) omap_serial_init(); usb_ehci_init(&ehci_pdata); + + /* TSC 2004 */ + am3517evm_tsc_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_TSC2004_IRQ); + i2c_register_board_info(1, am3517evm_tsc_i2c_boardinfo, + ARRAY_SIZE(am3517evm_tsc_i2c_boardinfo)); } static void __init am3517_evm_map_io(void) -- 1.6.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html