There are several places where readw()/writew() functions are used instead of
OMAP_MCBSP_READ()/WRITE() macros for manipulating McBSP registers. Replace
them with macros to ensure consistent behaviour after caching is introduced.
Created against linux-omap for-next,
commit 4421752e331cfb1d942b47ffdb26e451a8da58a0.
Tested on OMAP1510 based Amstrad Delta.
Compile-tested with omap_3430sdp_defconfig.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
---
arch/arm/plat-omap/mcbsp.c | 44
++++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 22 deletions(-)
--- git/arch/arm/plat-omap/mcbsp.c.orig 2009-11-27 11:53:46.000000000 +0100
+++ git/arch/arm/plat-omap/mcbsp.c 2009-12-01 03:02:17.000000000 +0100
@@ -622,26 +622,26 @@ int omap_mcbsp_pollwrite(unsigned int id
mcbsp = id_to_mcbsp_ptr(id);
base = mcbsp->io_base;
- writew(buf, base + OMAP_MCBSP_REG_DXR1);
+ OMAP_MCBSP_WRITE(base, DXR1, buf);
/* if frame sync error - clear the error */
- if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
+ if (OMAP_MCBSP_READ(base, SPCR2) & XSYNC_ERR) {
/* clear error */
- writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR),
- base + OMAP_MCBSP_REG_SPCR2);
+ OMAP_MCBSP_WRITE(base, SPCR2,
+ OMAP_MCBSP_READ(base, SPCR2) & (~XSYNC_ERR));
/* resend */
return -1;
} else {
/* wait for transmit confirmation */
int attemps = 0;
- while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) {
+ while (!(OMAP_MCBSP_READ(base, SPCR2) & XRDY)) {
if (attemps++ > 1000) {
- writew(readw(base + OMAP_MCBSP_REG_SPCR2) &
- (~XRST),
- base + OMAP_MCBSP_REG_SPCR2);
+ OMAP_MCBSP_WRITE(base, SPCR2,
+ OMAP_MCBSP_READ(base, SPCR2) &
+ (~XRST));
udelay(10);
- writew(readw(base + OMAP_MCBSP_REG_SPCR2) |
- (XRST),
- base + OMAP_MCBSP_REG_SPCR2);
+ OMAP_MCBSP_WRITE(base, SPCR2,
+ OMAP_MCBSP_READ(base, SPCR2) |
+ (XRST));
udelay(10);
dev_err(mcbsp->dev, "Could not write to"
" McBSP%d Register\n", mcbsp->id);
@@ -667,24 +667,24 @@ int omap_mcbsp_pollread(unsigned int id,
base = mcbsp->io_base;
/* if frame sync error - clear the error */
- if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
+ if (OMAP_MCBSP_READ(base, SPCR1) & RSYNC_ERR) {
/* clear error */
- writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR),
- base + OMAP_MCBSP_REG_SPCR1);
+ OMAP_MCBSP_WRITE(base, SPCR1,
+ OMAP_MCBSP_READ(base, SPCR1) & (~RSYNC_ERR));
/* resend */
return -1;
} else {
/* wait for recieve confirmation */
int attemps = 0;
- while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) {
+ while (!(OMAP_MCBSP_READ(base, SPCR1) & RRDY)) {
if (attemps++ > 1000) {
- writew(readw(base + OMAP_MCBSP_REG_SPCR1) &
- (~RRST),
- base + OMAP_MCBSP_REG_SPCR1);
+ OMAP_MCBSP_WRITE(base, SPCR1,
+ OMAP_MCBSP_READ(base, SPCR1) &
+ (~RRST));
udelay(10);
- writew(readw(base + OMAP_MCBSP_REG_SPCR1) |
- (RRST),
- base + OMAP_MCBSP_REG_SPCR1);
+ OMAP_MCBSP_WRITE(base, SPCR1,
+ OMAP_MCBSP_READ(base, SPCR1) |
+ (RRST));
udelay(10);
dev_err(mcbsp->dev, "Could not read from"
" McBSP%d Register\n", mcbsp->id);
@@ -692,7 +692,7 @@ int omap_mcbsp_pollread(unsigned int id,
}
}
}
- *buf = readw(base + OMAP_MCBSP_REG_DRR1);
+ *buf = OMAP_MCBSP_READ(base, DRR1);
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
