Most of the dpll api's from dpll.c are reused for OMAP4.
This patch does extend a few api's for OMAP4 support.
Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
Cc: Paul Walmsley <paul@xxxxxxxxx>
Cc: Benoit Cousson <b-cousson@xxxxxx>
---
arch/arm/mach-omap2/Makefile | 4 +++-
arch/arm/mach-omap2/clock.c | 5 +++++
arch/arm/mach-omap2/clock.h | 6 ++++++
arch/arm/mach-omap2/clock44xx.c | 25 -------------------------
arch/arm/mach-omap2/dpll.c | 22 ++++++++++++++--------
5 files changed, 28 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 59a568c..ece0d18 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -7,12 +7,14 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o prcm.o \
clock.o
omap-2-3-common = irq.o sdrc.o omap_hwmod.o
+omap-3-4-common = dpll.o
prcm-common = powerdomain.o
clock-common = clockdomain.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
- dpll.o
+ $(omap-3-4-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index adf1a78..88b53b9 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -249,6 +249,11 @@ u32 omap2_get_dpll_rate(struct clk *clk)
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
return dd->clk_bypass->rate;
+ } else if (cpu_is_omap44xx()) {
+ if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+ v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+ v == OMAP4XXX_EN_DPLL_MNBYPASS)
+ return dd->clk_bypass->rate;
}
v = __raw_readl(dd->mult_div1_reg);
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index bc24687..29e6a1a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -36,6 +36,12 @@
#define OMAP3XXX_EN_DPLL_FRBYPASS 0x6
#define OMAP3XXX_EN_DPLL_LOCKED 0x7
+/* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP4XXX_EN_DPLL_MNBYPASS 0x4
+#define OMAP4XXX_EN_DPLL_LPBYPASS 0x5
+#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6
+#define OMAP4XXX_EN_DPLL_LOCKED 0x7
+
/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
#define DPLL_LOW_POWER_STOP 0x1
#define DPLL_LOW_POWER_BYPASS 0x5
diff --git a/arch/arm/mach-omap2/clock44xx.c b/arch/arm/mach-omap2/clock44xx.c
index 785cdeb..8b38aa2 100644
--- a/arch/arm/mach-omap2/clock44xx.c
+++ b/arch/arm/mach-omap2/clock44xx.c
@@ -246,31 +246,6 @@ static struct clk_functions omap2_clk_functions = {
.clk_disable_unused = omap2_clk_disable_unused,
};
-/*
- * Dummy functions for DPLL control. Plan is to re-use
- * existing OMAP3 dpll control functions.
- */
-
-unsigned long omap3_dpll_recalc(struct clk *clk)
-{
- return 0;
-}
-
-int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
-{
- return 0;
-}
-
-int omap3_noncore_dpll_enable(struct clk *clk)
-{
- return 0;
-}
-
-void omap3_noncore_dpll_disable(struct clk *clk)
-{
- return;
-}
-
static const struct clkops clkops_noncore_dpll_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll.c
index 3e1378f..273348e 100644
--- a/arch/arm/mach-omap2/dpll.c
+++ b/arch/arm/mach-omap2/dpll.c
@@ -318,10 +318,12 @@ int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
_omap3_noncore_dpll_bypass(clk);
/* Set jitter correction */
- v = __raw_readl(dd->control_reg);
- v &= ~dd->freqsel_mask;
- v |= freqsel << __ffs(dd->freqsel_mask);
- __raw_writel(v, dd->control_reg);
+ if (!cpu_is_omap44xx()) {
+ v = __raw_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ __raw_writel(v, dd->control_reg);
+ }
/* Set DPLL multiplier, divider */
v = __raw_readl(dd->mult_div1_reg);
@@ -353,7 +355,7 @@ int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
{
struct clk *new_parent = NULL;
- u16 freqsel;
+ u16 freqsel = 0;
struct dpll_data *dd;
int ret;
@@ -389,9 +391,13 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
if (dd->last_rounded_rate == 0)
return -EINVAL;
- freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
- if (!freqsel)
- WARN_ON(1);
+ /* No freqsel on OMAP4 */
+ if (!cpu_is_omap44xx()) {
+ freqsel = _omap3_dpll_compute_freqsel(clk,
+ dd->last_rounded_n);
+ if (!freqsel)
+ WARN_ON(1);
+ }
pr_debug("clock: %s: set rate: locking rate to %lu.\n",
clk->name, rate);
--
1.5.4.7
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
