Hi,
On Fri, Nov 27, 2009 at 03:44:20PM +0100, ext Grazvydas Ignotas wrote:
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b96f29d..9cea9b5 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -29,3 +29,4 @@ obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
+obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
new file mode 100644
index 0000000..604dd56
--- /dev/null
+++ b/drivers/power/twl4030_charger.c
@@ -0,0 +1,499 @@
+/*
+ * TWL4030/TPS65950 BCI (Battery Charger Interface) driver
+ *
+ * Copyright (C) 2009 Gražvydas Ignotas <notasas@xxxxxxxxx>
+ *
+ * based on twl4030_bci_battery.c by TI
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/power_supply.h>
+
+#define REG_BCIMSTATEC 0x02
please prepend these defines with e.g. TWL4030_BCI_
this would look like:
#define TWL4030_BCI_MSTATEC 0x02
+#define REG_BCIICHG 0x08
+#define REG_BCIVAC 0x0a
+#define REG_BCIVBUS 0x0c
+#define REG_BCIMFSTS4 0x10
+#define REG_BCICTL1 0x23
+
+#define REG_BOOT_BCI 0x07
+#define REG_STS_HW_CONDITIONS 0x0f
+
+#define BCIAUTOWEN 0x20
+#define CONFIG_DONE 0x10
+#define CVENAC 0x04
+#define BCIAUTOUSB 0x02
+#define BCIAUTOAC 0x01
+#define BCIMSTAT_MASK 0x3F
+#define STS_VBUS 0x80
+#define STS_CHG 0x02
+#define STS_USB_ID 0x04
+#define CGAIN 0x20
+#define USBFASTMCHG 0x04
+
+#define STATEC_USB 0x10
+#define STATEC_AC 0x20
+#define STATEC_STATUS_MASK 0x0f
+#define STATEC_QUICK1 0x02
+#define STATEC_QUICK7 0x07
+#define STATEC_COMPLETE1 0x0b
+#define STATEC_COMPLETE4 0x0e
+
+#define BCI_DELAY 100
100ms ??? that's too quick for battery monitoring. Imagine that you'll
have 10 i2c transfers per-second forever with this one. Don't you think
you're waking up omap for nothing ??
something like 1 second when doing heavy operation should be enough and
5 to 10 seconds in idle is good enough as well.
+static struct twl4030_bci_device_info twl4030_bci = {
this should be allocated on probe() time.
+/*
+ * called by TWL4030 USB transceiver driver on USB_PRES interrupt.
+ */
+int twl4030charger_usb_en(int enable)
+{
+ if (twl4030_bci.started)
+ schedule_delayed_work(&twl4030_bci.bat_work,
+ msecs_to_jiffies(BCI_DELAY));
I don't like the way you did this. I would expect twl4030-usb to kick
the charger detection based on the VBUS irq. You have to consider the
possibility of boards which won't use BCI module and will have some
bq24xxx chip dealing with that like RX51. So instead of implementing
this here and forcing people to have this driver enabled on e.g. RX51,
you should implement the charger_enable_usb() logic in twl4030-usb
itself. /me thinks
+static int __devinit twl4030_bci_probe(struct platform_device *pdev)
+{
+ int irq;
+ int ret;
+
+ twl4030_charger_enable_ac(true);
+ twl4030_charger_enable_usb(true);
+
+ irq = platform_get_irq(pdev, 0);
+
+ /* CHG_PRES irq */
+ ret = request_irq(irq, twl4030_charger_interrupt,
+ 0, pdev->name, &twl4030_bci);
how about using request_threaded_irq() ?? then you avoid having that
workqueue.
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
