Hi,
* Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> [091203 04:29]:
> Reserve space inside omap_mcbsp structure for storing cached copies of McBSP
> register values.
> Modify the MCBSP_WRITE() macro to update the cache with every register write
> operation.
> Introduce a new macro that reads from the cache instead of hardware.
>
> Applies on top of patch 2 from this series:
> [PATCH v3 2/4] OMAP: McBSP: Prepare register read/write macros API for caching
>
> Tested on OMAP1510 based Amstrad Delta using linux-omap for-next,
> commit 4421752e331cfb1d942b47ffdb26e451a8da58a0.
> Compile-tested with omap_3430sdp_defconfig.
>
> Signed-off-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
>
> ---
> Thursday 03 December 2009 08:49:21 Jarkko Nikula wrote:
> > On Tue, 1 Dec 2009 04:15:50 +0100
> > Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> wrote:
> > > #define MCBSP_WRITE(mcbsp, reg, val) \
> > > - omap_mcbsp_write(mcbsp->io_base, OMAP_MCBSP_REG_##reg, val)
> > > + omap_mcbsp_write(mcbsp->io_base, OMAP_MCBSP_REG_##reg, \
> > > + mcbsp->reg_cache[OMAP_MCBSP_REG_##reg / OMAP_MCBSP_REG_DRR1] \
> > > + = val)
> > > +#define MCBSP_READ_CACHE(mcbsp, reg) \
> > > + (mcbsp->reg_cache[OMAP_MCBSP_REG_##reg / OMAP_MCBSP_REG_DRR1])
> >
> > These divisions by DDR1 are confusing. Use rather sizeof:
> >
> > reg_cache[OMAP_MCBSP_REG_##reg / sizeof(*mcbsp->reg_cache)]
>
> Done.
>
> Jarkko, many thanks for your cooperation :).
>
> Janusz
>
> arch/arm/plat-omap/include/plat/mcbsp.h | 5 +++++
> arch/arm/plat-omap/mcbsp.c | 7 ++++++-
> 2 files changed, 11 insertions(+), 1 deletion(-)
>
> --- git/arch/arm/plat-omap/include/plat/mcbsp.h.orig 2009-11-27 11:53:45.000000000 +0100
> +++ git/arch/arm/plat-omap/include/plat/mcbsp.h 2009-12-01 03:37:21.000000000 +0100
> @@ -415,6 +415,11 @@ struct omap_mcbsp {
> u16 max_tx_thres;
> u16 max_rx_thres;
> #endif
> +#ifdef CONFIG_ARCH_OMAP1
> + u16 reg_cache[OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1];
> +#else
> + u32 reg_cache[OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1];
> +#endif
> };
> extern struct omap_mcbsp **mcbsp_ptr;
> extern int omap_mcbsp_count;
How about rather set:
static u16 omap1_reg_cache[];
and
static u32 omap2_reg_cache[];
> --- git/arch/arm/plat-omap/mcbsp.c.orig 2009-12-01 03:19:56.000000000 +0100
> +++ git/arch/arm/plat-omap/mcbsp.c 2009-12-03 11:37:21.000000000 +0100
> @@ -49,7 +49,12 @@ int omap_mcbsp_read(void __iomem *io_bas
> #define MCBSP_READ(mcbsp, reg) \
> omap_mcbsp_read(mcbsp->io_base, OMAP_MCBSP_REG_##reg)
> #define MCBSP_WRITE(mcbsp, reg, val) \
> - omap_mcbsp_write(mcbsp->io_base, OMAP_MCBSP_REG_##reg, val)
> + omap_mcbsp_write(mcbsp->io_base, OMAP_MCBSP_REG_##reg, \
> + mcbsp->reg_cache[OMAP_MCBSP_REG_##reg / \
> + sizeof(*mcbsp->reg_cache)] = val)
> +#define MCBSP_READ_CACHE(mcbsp, reg) \
> + (mcbsp->reg_cache[OMAP_MCBSP_REG_##reg / \
> + sizeof(*mcbsp->reg_cache)])
>
> #define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
> #define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
Then rather than doing this cache manipulation in the macro, just
do it in the omap_mcbsp_read/write functions based on the
cpu_class_is_omap1() accessing omap1_reg_cache or omap2_reg_cache.
This way you can get rid of the ifdef else.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
