Maxime Petazzoni <mpetazzoni@xxxxxxxxxx> writes:
> Hi,
>
> * Premi, Sanjeev <premi@xxxxxx> [2009-11-20 21:17:04]:
>
>> I am facing a strange problem on OMAP3EVM after resuming from idle.
>> When using OPP5, the VDD1 voltage ramps to 1.35V.
>>
>> However, when i go thru the idle/wakeup cycle, the voltage never
>> ramps back to 1.35V but stays at 1.20V.
>
> I'm seeing some interesting behavior with the OPP values here, too, with
> suspend/resume. I'm using SRF based PM and CPUFREQ. Here's what happens:
>
> When changing the CPU frequency through the scaling_setfreq knob of
> CPUFREQ, the vdd{1,2}_opp values are updated accordingly. After a
> suspend/resume cycles, the OPPs return to their pre-suspend values, all
> is fine.
>
> But when changing the OPP values by hand through the vdd{1,2}_opp knobs,
> the CPU frequency is changed accordingly, which is expected. But after a
> suspend/resume cycle, the OPP values return to the value CPUFREQ set
> them to (which may be different than the default OPP values of 3).
>
> Is this the normal behavior? Is cpufreq authoritative on the OPP values
> on resume? Or should it follow whatever value was manually set before
> suspending?
FWIW, the vdd*_opp sysfs hooks were for initial debug/dev and should
be considered experimental (a.k.a broken.) They will disappear from
the PM branch shortly.
CPUfreq should be the only interface used for DVFS.
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
