Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 0/2] Amstrad Delta: add support for LCD contrast
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Dose OMAP3 support split transfer?
  • From: jung songtan <jungsongtan@xxxxxxxxx>
• Re: Modifying the kernel keymap
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH v3] mfd: Initial support for twl5031
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: Modifying the kernel keymap
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: CPU driver
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Modifying the kernel keymap
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH 8/9 v2] omap3: pm: introduce dynamic OPP
  • From: "Menon, Nishanth" <nm@xxxxxx>
• CPU driver
  • From: tarek attia <tarek.m.attia@xxxxxxxxx>
• [PATCH 0/7] musb: Add structure 'musb_hdrc_board_data'
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/7] musb: Add structure to get board specific data
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 7/7] musb: set 'extvbus' for OMAP3EVM Rev >=E
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/7] musb: Get power (mA) from board data
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 5/7] musb: Add 'extvbus' in musb_hdrc_board_data
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 6/7] musb: set 'extvbus' default value to zero
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 3/7] musb: Update musb_init() call for all OMAP3 boards
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 4/7] musb: Update setup_usb() call for all Davinci boards
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH] omap3: ehci: Add regulator framework
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• RE: Query: Regulator framework in EHCI driver
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• [PATCH] [mmc-omap] Add support for 16-bit and 32-bit registers
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH] [OMAP7XX] Add missing clocks for MMC
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• [PATCH v2 for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH 3/3] htcherald: Add default kernel configuration for Herald
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• [PATCH 2/3] htcherald: Modify Makefiles and Kconfig for HTC Herald
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC Herald
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• [PATCH 0/3] htcherald: Add board support for HTC Herald
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH 0/4] omap_udc fixes for omap7xx
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• Re: [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
  • From: Daniel Toussaint <daniel@xxxxxxxxxx>
• Re: [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
  • From: Frédéric BEGOU <fbegou@xxxxxxx>
• Re: [PATCH 2/2] ASoC: OMAP: reconfigure DMA to resume audio
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v2 1/2] input: touchscreen: introduce tsc2005 driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [RFC][PATCH] ARM: OMAP: McBSP: Use register cache
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 8/9 v2] omap3: pm: introduce dynamic OPP
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Some patches need reposting, inbox cleared, patchwork cleared
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [build errro on for-next branch] RE: [1/3] omap3evm: ehci: Add EHCI padconfig for board Rev >= E
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v4] OMAP: GPIO module enable/disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap3evm: MIgrate to smsc911x ethernet driver.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 2/2 (for-next)] ARM: OMAP3: Add defconfig for IGEP v2 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 8/10] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 7/10] omap mailbox: expose omap_mbox_enable()/disable_irq()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 12/14] omap3: move check_revision above check_features, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: n800/810 boot log
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: n800/810 boot log
  • From: green <greenfreedom10@xxxxxxxxx>
• RE: CPUFREQ for beagle
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: Some patches need reposting, inbox cleared, patchwork cleared
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: Some patches need reposting, inbox cleared, patchwork cleared
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: Some patches need reposting, inbox cleared, patchwork cleared
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: Some patches need reposting, inbox cleared, patchwork cleared
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: Some patches need reposting, inbox cleared, patchwork cleared
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: CPUFREQ for beagle
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: Some patches need reposting, inbox cleared, patchwork cleared
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ASoC: OMAP: reconfigure DMA to resume audio
  • From: Jane Wang <jwang@xxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
  • From: "Wang, Jane" <jwang@xxxxxx>
• Re: [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] ASoC: OMAP: reconfigure DMA to resume audio
  • From: "Wang, Jane" <jwang@xxxxxx>
• [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix
  • From: Jane Wang <jwang@xxxxxx>
• CPUFREQ for beagle
  • From: tarek attia <tarek.m.attia@xxxxxxxxx>
• Re: [PATCH 2/2] ASoC: OMAP: reconfigure DMA to resume audio
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4] OMAP: GPIO module enable/disable
  • From: Charulatha V <charu@xxxxxx>
• Re: Query: Regulator framework in EHCI driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 10/10] omap mailbox: OMAP4 Mailbox-driver Patch to support tasklet implementation
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 9/10] omap: mailbox: OMAP4 Mailbox Patch to change the IRQ
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 8/10] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 7/10] omap mailbox: expose omap_mbox_enable()/disable_irq()
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 6/10] omap: mailbox: remove unnecessary arg for
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 5/10] omap: mailbox: remove disable_/enable_mbox_irq in isr
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 4/10] omap: mailbox: remove class interface
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 3/10] omap: mailbox: remove sequence bit checking
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 2/10] omap: mailbox: OMAP4 - Add resources
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 1/10] omap: mailbox: Add build specific changes to support omap mailbox
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 0/10] omap mailbox: Refreshed patch series for-next branch
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 2/2 (for-next)] ARM: OMAP3: Add defconfig for IGEP v2 board
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
  • From: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 3/4] Add support for DEVKIT8000 LCD
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH] omap3: Change the default silicon
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH] omap3: Change the default silicon
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH] omap3: Change the default silicon
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH v2] omap3: Change the default silicon
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH 1/1] DSPBRIDGE: cache operation against kernel address instead of user's
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• RE: [PATCH] omap3: Change the default silicon
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH v2 26/32] OMAP3: PM debug: allow runtime toggle of PM features
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH] omap3evm: MIgrate to smsc911x ethernet driver.
  • From: Sriramakrishnan <srk@xxxxxx>
• [build errro on for-next branch] RE: [1/3] omap3evm: ehci: Add EHCI padconfig for board Rev >= E
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• n800/810 boot log
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCHv3 3/3] OMAP UART: Add omap-serial driver support in omap_3430sdp_defconfig.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCHv3 2/3] OMAP UART: Add platform data for omap-serial driver.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCHv3 1/3] OMAP UART: Add omap-serial driver support.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver.
  • From: "Govindraj.R" <govindraj.raja@xxxxxx>
• [PATCH 9/9 v2] omap3: pm: introduce 3630 opps
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 6/9] omap3: clk: use pm accessor functions for cpufreq table
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 4/9] omap3: pm: use opp accessor functions for omap-target
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/9] omap3: pm: srf: use opp accessor function
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 8/9 v2] omap3: pm: introduce dynamic OPP
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/9] omap3: pm: introduce enabled flag to omap_opp
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 7/9] omap3: pm: remove VDDx_MIN/MAX macros
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/9 v2] omap3: pm: introduce support for 3630 OPPs
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH] omap3: Change the default silicon
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: Some patches need reposting, inbox cleared, patchwork cleared
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: Some patches need reposting, inbox cleared, patchwork cleared
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: Query: Regulator framework in EHCI driver
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Some patches need reposting, inbox cleared, patchwork cleared
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/14] omap3: drop all IVA-related address base definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/14] omap3: keep SoC features on the same line
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/14] omap3: move check_revision above check_features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/14] omap3: evm: make HSMMC driver built-in
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/14] omap3: HSMMC2 8-bit mux configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/14] omap3630: Set omap3630 MMC1 I/O speed to 52Mhz
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/14] omap3630: Configure HSMMC1 to 4-bit
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/14] omap3630: Add HSMMC related checks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/14] omap: McBSP: Do not use extensive spin locks for dma_op_mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/14] omap: iommu: reorganize
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/14] omap: iovmm: remove cache flush operation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/14] omap: iommu: avoid remapping if it's been mapped in MPU side
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/14] omap: Add platform init code for EHCI driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/14] omap: update plat/usb.h to allow ehci driver to build
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/14] Omap low-level device init updates for 2.6.33
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP3: keep SoC features on the same line
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] RX51: Add SDRAM init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] RX51: Add SDRAM init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: FEATURES prints
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] OMAP3: keep SoC features on the same line
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [APPLIED] [PATCH v3] omap3-iommu: reorganize
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] omap3evm: Add keypad as wakeup source
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [1/3] omap3evm: ehci: Add EHCI padconfig for board Rev >= E
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap3evm: Migrate to smsc911x ethernet driver.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap3evm: Add board revision function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] Fixing keymap for zoom2 according to matrix keypad framwork
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: MMC related patches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 2/2] AM35xx: Defconfig for AM3517 EVM board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v2 1/2] Revert "[IA64] prevent ia64 from invoking irq
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/2] AM35xx: Add support for AM3517 EVM board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V3] [OMAP] GPIO module enable/disable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: MMC related patches
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: [PATCH] omap3: Change the default silicon
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP3: drop all IVA-related address base definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP: McBSP: Do not use extensive spin locks for dma_op_mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 12/14] arch/arm/plat-omap: Drop an unnecessary NULL test
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/2] OMAP3: move check_revision above check_features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2] FIX OMAP3:McBSP poll read and write for OMAP3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: FEATURES prints
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v3] omap3-iommu: reorganize
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• [APPLIED] [PATCH] ARM: OMAP3: Fix 3430SDP defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH-v5 2/4] OMAP3: Add support for NAND on ZOOM2/LDP boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH-v5 1/4] OMAP2/3: Add support for flash on SDP boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP3: defconfigs: remove SYSFS_DEPRECATED flag
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] I2C: OMAP3: PM: (re)init for every transfer to support off-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] omap-fixes for v2.6.32-rc6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 8/10 v3] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
  • From: "C.A, Subramaniam" <subramaniam.ca@xxxxxx>
• [PATCH 3/6] OMAP3: CPUidle: Fixed support for ON / INACTIVE states
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 6/6] OMAP3: CPUidle: Added peripheral pwrdm checks into bm check
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 5/6] OMAP: Powerdomains: Add support for checking if pwrdm can idle
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 1/6] OMAP: Powerdomains: Add support for INACTIVE state on pwrdm level
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 2/6] OMAP3: PM: Added support for INACTIVE and ON states for powerdomains
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 4/6] OMAP3: PM: Removed PER + CORE state hacking from omap_sram_idle
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 0/6] Idle status patches revisited
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Linux-2.;6.29 needed
  • From: tarek attia <tarek.m.attia@xxxxxxxxx>
• Re: [PATCH 3/4] Add support for DEVKIT8000 LCD
  • From: Daniel Toussaint <daniel@xxxxxxxxxx>
• RE: [PATCH 5/5] OMAP3: PM: Disable OTG autoidle when waking up from off-mode
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 5/5] OMAP3: PM: Disable OTG autoidle when waking up from off-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] OMAP3: PM: Disabled I2C4 repeated start operation mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/11] OMAP3: Fixed ARM aux ctrl register save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 11/11] OMAP3: PM: Disable OTG autoidle when waking up from off-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer
  • From: Chris Hudson <chudson@xxxxxxxxxx>
• Re: [PATCH 4/4] Add ASoC support for DEVKIT8000
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Query: Regulator framework in EHCI driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] AM35xx: Clock table updates for AM3505/17
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them
  • From: Jens Axboe <jens.axboe@xxxxxxxxxx>
• Re: [PATCH 3/4] Add support for DEVKIT8000 LCD
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them
  • From: Romit Dasgupta <romit@xxxxxx>
• RE: [PATCH] omap3evm: Migrate to smsc911x ethernet driver.
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• Re: [PATCH 2/4] Add omap3_devkit8000_defconfig
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 3/4] Add support for DEVKIT8000 LCD
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• FW: [PATCH] omap3evm: Migrate to smsc911x ethernet driver.
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• Re: [PATCH 4/4] Add ASoC support for DEVKIT8000
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 1/4] Add minimal support for DEVKIT8000
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 2/4] Add omap3_devkit8000_defconfig
  • From: Kim Botherway <kbotherway@xxxxxxxxxxx>
• [PATCH 3/4] Add support for DEVKIT8000 LCD
  • From: Kim Botherway <kbotherway@xxxxxxxxxxx>
• [PATCH 2/5] OMAP3: PM: Disabled I2C4 repeated start operation mode
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCHv3 0/5] Misc fixes [for PM branch]
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 3/5] OMAP3: PM: Added support for L2 aux ctrl register save and restore
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 5/5] OMAP3: PM: Disable OTG autoidle when waking up from off-mode
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 4/5] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 4/4] Add ASoC support for DEVKIT8000
  • From: Kim Botherway <kbotherway@xxxxxxxxxxx>
• [PATCH 1/5] OMAP3: Fixed ARM aux ctrl register save/restore
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 1/4] Add minimal support for DEVKIT8000
  • From: Kim Botherway <kbotherway@xxxxxxxxxxx>
• RE: [PATCH 07/11] OMAP3: Fixed ARM aux ctrl register save/restore
  • From: "Gopinath, Thara" <thara@xxxxxx>
• RE: [PATCH 11/11] OMAP3: PM: Disable OTG autoidle when waking up from off-mode
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH 08/11] OMAP3: PM: Disabled I2C4 repeated start operation mode
  • From: <Tero.Kristo@xxxxxxxxx>
• [PATCH] Fixing keymap for zoom2 according to matrix keypad framwork
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH] arm: omap: code cleanup to id.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH 09/11] OMAP3: PM: Added support for L2 aux ctrl register save and restore
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH 07/11] OMAP3: Fixed ARM aux ctrl register save/restore
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH 11/11] OMAP3: PM: Disable OTG autoidle when waking up from off-mode
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH] omap: zoom3: remove SYSFS_DEPRECATED from defconfig
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH] omap: zoom3: Update defconfig for USB
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH] omap: 3630sdp: Update defconfig for USB
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: Query: Regulator framework in EHCI driver
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH 11/11] OMAP3: PM: Disable OTG autoidle when waking up from off-mode
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: Query: Regulator framework in EHCI driver
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 7/9] omap3: pm: remove VDDx_MIN/MAX macros
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 9/9] omap3: pm: introduce 3630 opps
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 8/9] omap3: pm: introduce dynamic OPP
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 6/9] omap3: clk: use pm accessor functions for cpufreq table
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 4/9] omap3: pm: use opp accessor functions for omap-target
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 2/9] omap3: pm: introduce opp accessor functions
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/9] omap3: pm: introduce enabled flag to omap_opp
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 3/9] omap3: pm: srf: introduce accessor function
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/9] OMAP3: PM: introduce support for 3630 OPPs
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• RE: [PATCH] AM35xx: Clock table updates for AM3505/17
  • From: "Lohithakshan, Ranjith" <ranjithl@xxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• RE: Query: Regulator framework in EHCI driver
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: Query: Regulator framework in EHCI driver
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• [PATCH 10/10] omap3: AM35xx: Initialize omap_chip bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/10] omap3: AM35xx: Runtime detection of the device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/10] omap3: 3630: update is_chip variable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/10] omap3: Introduce OMAP3630
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/10] omap3: Runtime detection of OMAP35x devices
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/10] omap3: Runtime detection of Si features
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/10] omap1: omap_udc: Add clocking and disable vbus sense for omap7xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/10] omap1: mmc: Add platform init for omap7xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/10] omap: introduce OMAP_LL_DEBUG_NONE DEBUG_LL config
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/10] omap: Eliminate OMAP_MAX_NR_PORTS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/10] omap am35xx, 3630, 7xx cpu changes for merge window after 2.6.32
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: MMC related patches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap3evm: make HSMMC driver built-in.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: linux on sdp2420
  • From: Haribabu Narayanan <haribabu@xxxxxxxxxxx>
• Re: [RFC][Patch V1] OMAP3: Mux Changes.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v3 8/8] omap: 3630sdp: defconfig creation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v3 7/8] omap: zoom3: defconfig creation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v3 6/8] omap: zoom2: update defconfig for LL_DEBUG_NONE
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v3 5/8] omap: 3630sdp: introduce 3630 sdp board support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v3 4/8] omap: zoom3: introduce zoom3 board support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 3/8] omap: zoom: drop i2c-1 speed to 2400
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v3 3/8] omap: zoom: drop i2c-1 speed to 2400
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v3 2/8] omap: zoom: rename zoom2 name to generic zoom
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v3 1/8] omap: zoom2: split board file for software reuse
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP3: CPUidle: Fixed timer resolution
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Update CPU idle parameter passing
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Remove duplicate code blocks
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• MMC related patches
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: [PATCH 10/11] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/11] OMAP3: PM: Added support for L2 aux ctrl register save and restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 11/11] OMAP3: PM: Disable OTG autoidle when waking up from off-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 8/8] omap: 3630sdp: defconfig creation
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v3 4/8] omap: zoom3: introduce zoom3 board support
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v3 7/8] omap: zoom3: defconfig creation
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v3 5/8] omap: 3630sdp: introduce 3630 sdp board support
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v3 3/8] omap: zoom: drop i2c-1 speed to 2400
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v3 6/8] omap: zoom2: update defconfig for LL_DEBUG_NONE
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v3 2/8] omap: zoom: rename zoom2 name to generic zoom
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v3 0/8] introduce 3630 boards
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v3 1/8] omap: zoom2: split board file for software reuse
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• N810: problem with watchdog
  • From: Francisco Alecrim <alecrim@xxxxxxxxx>
• Re: [PATCH 08/11] OMAP3: PM: Disabled I2C4 repeated start operation mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/11] OMAP3: Fixed ARM aux ctrl register save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/11] OMAP3: PM: Disable interrupt controller AUTOIDLE before WFI
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] Omap fixes for v2.6.32-rc6
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• Re: [PATCH 04/11] OMAP3: PM: Ack pending interrupts before entering suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/11] OMAP2/3: DMTIMER: Clear pending interrupts when stopping a timer
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/11] OMAP3: Disable Smartreflex before pwrdm enters RET
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/11] OMAP3: PM: Fixed padconf save done check
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/10 v3] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [GIT] pull request: PM CPUidle base support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [GIT] pull request: PM off-mode for 2.6.33
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [APPLIED] [PATCH 6/10] omap mailbox: remove unnecessary arg for omap_mbox_msg_send
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 5/10] omap mailbox: remove disable_/enable_mbox_irq in isr
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 4/10] omap mailbox: remove class interface
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/10] omap mailbox: Add build specific changes to support omap mailbox.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/10] omap mailbox: Add build specific changes to support omap mailbox.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH] AM35xx: Clock table updates for AM3505/17
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer
  • From: Chris Hudson <chudson@xxxxxxxxxx>
• Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• RE: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [RFC PATCH v3 3/3] mach-omap2:kxte9 accelerometer mux support for OMAP ZoomII
  • From: chudson@xxxxxxxxxx
• [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer
  • From: chudson@xxxxxxxxxx
• [RFC PATCH v3 2/3] mach-omap2:kxte9 accelerometer support for OMAP ZoomII
  • From: chudson@xxxxxxxxxx
• Re: [PATCH 0/3] omap3: cm-t35 updates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them
  • From: Jens Axboe <jens.axboe@xxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: linux-next: manual merge of the usb tree with the omap tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/8] Omap fixes for v2.6.32-rc6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2.5/8] omap: Fix omapfb/lcdc on OMAP1510 broken when PM set
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v3] OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/8] omap1: Amstrad Delta defconfig fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3]NAND: OMAP: Fixing omap nand driver, compiled as module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Linux_KERNEL UPDATE
  • From: tarek attia <tarek.m.attia@xxxxxxxxx>
• Re: [PATCH 3/8] omap1: Amstrad Delta defconfig fixes
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: linux-omap-2.6 does not allow configuring rt2xx
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• power_management in beagleboard
  • From: tarek attia <tarek.m.attia@xxxxxxxxx>
• Re: [PATCH 1/4] Regulator: Adding header file for initializing OMAP35x PMICs
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Query: Regulator framework in EHCI driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 0/8] introduce 3630 boards
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH v2 0/8] introduce 3630 boards
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [PATCH] Disable headset jack detection for SDP3430
  • From: "Romero, Felipe" <felipe.romero@xxxxxx>
• RE: [PATCH v2 0/8] introduce 3630 boards
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: [PATCH v2 0/8] introduce 3630 boards
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• RE: Query: Regulator framework in EHCI driver
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• [PATCH 4/4] Regulator: Modifying Kconfig to choose from the available PMICs
  • From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
• [PATCH 3/4] Regulator: Modifying board-3430sdp.c to use PMIC-init-macros or wrappers
  • From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
• [PATCH 2/4] Regulator: Modifying board-omap3evm.c to use PMIC-init-macros or wrappers
  • From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
• [PATCH 1/4] Regulator: Adding header file for initializing OMAP35x PMICs
  • From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
• [PATCH 0/4] Regulator: Providing regulator initialization macros/wrappers
  • From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
• RE: [PATCH] Disable headset jack detection for SDP3430
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer
  • From: Chris Hudson <chudson@xxxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them
  • From: Romit Dasgupta <romit@xxxxxx>
• Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 1/3] omap3: cm-t35: update led polarity
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 3/3] omap3: cm-t35: add support for baseboard ehternet
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 0/3] omap3: cm-t35 updates
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 2/3] omap3: cm-t35: use matrix_keyboard
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [RFC PATCH v2 1/3] input:misc:driver support for Kionix kxte9 accelerometer
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP: update mach/usb.h to allow ehci driver to build
  • From: jung songtan <jungsongtan@xxxxxxxxx>
• [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them
  • From: Romit Dasgupta <romit@xxxxxx>
• linux-next: manual merge of the usb tree with the omap tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• [PATCH 0/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them
  • From: Romit Dasgupta <romit@xxxxxx>
• Re: [PATCH 3/5] omap: mux: Add new style pin multiplexing data for 34xx
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• RE: [PATCH] omap3evm: Migrate to smsc911x ethernet driver.
  • From: "Govindarajan, Sriramakrishnan" <srk@xxxxxx>
• RE: [RFC] [PATCH] OMAP3630 PM: Correct width for CLKSEL Fields
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• [PATCH 3/3] DSPBRIDGE: Implement sysfs entry to set wdt3 timeout
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• [PATCH 2/3] DSPBRIDGE: Implement sysfs entry to enable/disable wdt3
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• [PATCH 1/3] DSPBRDIGE: Implement WDT3 to notify DSP hangs
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• [PATCH 0/3] DSPBRDIGE: Implement WDT3 to notify DSP hangs
  • From: "Guzman Lugo, Fernando" <x0095840@xxxxxx>
• Re: linux-omap-2.6 does not allow configuring rt2xx
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• RE: [PATCH 1/2] OMAP3: Enable DSS2 for OMAP3EVM board
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 2/3]NAND: OMAP: Fixing omap nand driver, compiled as module
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 1/3] Fixing compilation warning for 'nand/omap2.c'
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 1/3] Fixing compilation warning for 'nand/omap2.c'
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 0/8] Omap fixes for v2.6.32-rc6
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Introduce support for AM35xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 8/8] omap3: Decrease cpufreq transition latency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/8] omap: update Pandora defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/8] omap3: 3430sdp: Enable Linux Regulator framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/8] omap3: beagle: Fix USB host port power control
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/8] omap3: pandora: Fix keypad keymap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/8] omap1: Amstrad Delta defconfig fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/8] omap: Use resource_size
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/8] omap: Fix race condition in omap dma driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/8] Omap fixes for v2.6.32-rc6
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] AM35xx: Runtime detection of the device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] AM35xx: Initialize omap_chip bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v2] AM35xx: Runtime detection of the device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap3: Fix macro definitions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v2 2/8] omap: introduce OMAP_LL_DEBUG_NONE DEBUG_LL config
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH v2 1/8] omap: 3630: update is_chip variable
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 3/8] omap: zoom2: split board file for software reuse
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [OMAP7XX] Add missing clocks for MMC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] omap_udc fixes for omap7xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC Herald
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [RFC PATCH v2 3/3] mach-omap2:kxte9 accelerometer mux support for OMAP ZoomII
  • From: chudson@xxxxxxxxxx
• [RFC PATCH v2 2/3] mach-omap2:kxte9 accelerometer support for OMAP ZoomII
  • From: chudson@xxxxxxxxxx
• [RFC PATCH v2 1/3] input:misc:driver support for Kionix kxte9 accelerometer
  • From: chudson@xxxxxxxxxx
• [PATCH v2 6/8] omap: zoom3: defconfig creation
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2 8/8] omap: 3630sdp: defconfig creation
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2 5/8] omap: zoom3: introduce zoom3 board support
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2 3/8] omap: zoom2: split board file for software reuse
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2 4/8] omap: zoom2: update defconfig for LL_DEBUG_NONE
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2 1/8] omap: 3630: update is_chip variable
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2 7/8] omap: 3630sdp: introduce 3630 sdp board support
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2 2/8] omap: introduce OMAP_LL_DEBUG_NONE DEBUG_LL config
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2 0/8] introduce 3630 boards
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• Re: [PATCH 3/5] omap: mux: Add new style pin multiplexing data for 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer
  • From: Chris Hudson <chudson@xxxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• linux-omap-2.6 does not allow configuring rt2xx
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• [APPLIED] [PATCH] update mach-types
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] input: lm8323: setting correct value to size_y
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer
  • From: Chris Hudson <chudson@xxxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH 2/3]NAND: OMAP: Fixing omap nand driver, compiled as module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer
  • From: Chris Hudson <chudson@xxxxxxxxxx>
• Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [RFC PATCH 3/3] mach-omap2:mux support for kxte9 accelerometer on OMAP ZoomII
  • From: chudson@xxxxxxxxxx
• [RFC PATCH 2/3] mach-omap2:kxte9 accelerometer support for OMAP ZoomII
  • From: chudson@xxxxxxxxxx
• [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer
  • From: chudson@xxxxxxxxxx
• Re: [PATCH] Disable headset jack detection for SDP3430
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] Disable headset jack detection for SDP3430
  • From: "Romero, Felipe" <felipe.romero@xxxxxx>
• [PATCH v3] mfd: Initial support for twl5031
  • From: Ilkka Koskinen <ilkka.koskinen@xxxxxxxxx>
• Re: n8x0 idle power problem (updated with registers dump)
  • From: xl6@xxxxxxxx
• Re: [PATCH 1/3] Fixing compilation warning for 'nand/omap2.c'
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 1/3] Fixing compilation warning for 'nand/omap2.c'
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 2/3]NAND: OMAP: Fixing omap nand driver, compiled as module
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 1/3] Fixing compilation warning for 'nand/omap2.c'
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• RE: [PATCH 0/2] Introduce support for AM35xx
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: omap3 otg host not working since 2.6.28? (sys_boot affects this)
  • From: Brad Parker <brad@xxxxxxxxxxx>
• Re: [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• [PATCH V3] [OMAP] GPIO module enable/disable
  • From: charu@xxxxxx
• Re: [PATCH 1/4 v2] MFD: TWL4030: Add audio_mclk to the codec platform data
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 2/2] omap: RX-51: enable tsc2005
  • From: Kalle Valo <kalle.valo@xxxxxx>
• RE: [PATCH 2/2 v2] OMAP3:clk - introduce DPLL4 jtype support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] AM35xx: Runtime detection of the device
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH 1/2] OMAP3: Enable DSS2 for OMAP3EVM board
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH-v5 4/4] OMAP: 3430SDP: Enable NAND in defconfig
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH-v5 3/4] OMAP: Zoom2: Enable NAND and JFFS2 support in defconfig
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH-v5 2/4] OMAP3: Add support for NAND on ZOOM2/LDP boards
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH-v5 1/4] OMAP2/3: Add support for flash on SDP boards
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH-v5 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: tsl2563 ambient light sensor driver
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: tsl2563 ambient light sensor driver
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: [PATCH-v4 1/4] OMAP2/3: Add support for flash on SDP boards
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• [PATCH] AM35xx: Initialize omap_chip bits
  • From: Ranjith Lohithakshan <ranjithl@xxxxxx>
• RE: [PATCH 1/2] OMAP3: Enable DSS2 for OMAP3EVM board
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH] usbtest: make module param pattern writeable
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH v3] OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP3: Enable DSS2 for OMAP3EVM board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] am3517evm : add nand support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap3evm : enable nand support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] OMAP3: decrease cpufreq transition latency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix race condition in omap_request_dma()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] >> > > [PATCH] Fix race condition in omap_request_dma()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap: update Pandora defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap3: beagle: Fix USB host port power control
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: update Pandora defconfig
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: n8x0 idle power problem (updated with registers dump)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• GPIO IRQ handler called only once
  • From: John Faith <jfaith7@xxxxxxxxx>
• RE: [PATCH] OMAP35xx : Add SDIO IRQ Support for OMAP35xx
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: GPMC setup help
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4 v2] ASoC/MFD/OMAP: TWL4030: APLL_CTL handling change
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH 2/4 v2] OMAP: Configure audio_mclk for twl4030-codec MFD
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [RFC][PATCH] ARM: omap3430sdp: Enable Linux Regulator framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap: pandora: fix keypad keymap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: update Pandora defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: omap: Use resource_size
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] arm: omap: Use resource_size
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH V2] [OMAP] GPIO Module disable when all pins are inactive
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH-v4 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH-v4 1/4] OMAP2/3: Add support for flash on SDP boards
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: tsl2563 ambient light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: tsl2563 ambient light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• [PATCH] arm: omap: Use resource_size
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• Re: Driver Merge Questions
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• RE: [PATCH 0/4] OMAP3:PM: T2 keypad: Wakeup with support for OFF mode
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [PATCH 4/4] OMAP3: PM: Extend T2 wakeup support to 3430SDP
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH 3/4] OMAP3: PM: Wakeup from T2 keypad with OFF mode
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH 2/4] OMAP3: PM: T2 keypad: Add board specific suspend-resume functions
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH 1/4] OMAP3: PM: Add suspend-resume to TWL4030 keypad
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH 0/4] OMAP3:PM: T2 keypad: Wakeup with support for OFF mode
  • From: Sanjeev Premi <premi@xxxxxx>
• RE: [PATCH V2] [OMAP] GPIO Module disable when all pins are inactive
  • From: "Varadarajan, Charu Latha" <charu@xxxxxx>
• Re: Driver Merge Questions
  • From: Chris Hudson <chudson@xxxxxxxxxx>
• RE: [PATCH V2] [OMAP] GPIO Module disable when all pins are inactive
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [PATCH V2] [OMAP] GPIO Module disable when all pins are inactive
  • From: charu@xxxxxx
• Re: [PATCH 1/2] staging: iio: tsl2563 ambient light sensor driver
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• Re: New feature proposal "quickwakeup"
  • From: Falempe Jocelyn <jocelyn.falempe@xxxxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: tsl2563 ambient light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: tsl2563 ambient light sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH v2 2/2] omap: RX-51: enable tsc2005
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: [alsa-devel] [PATCH] OMAP: McBSP: Do not use extensive spin locks for dma_op_mode
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] omap: rx51: Enable RX-51 ambient light sensor
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• [PATCH 1/2] staging: iio: tsl2563 ambient light sensor driver
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• DSP can work with 2.6.30 or later kernels?
  • From: "Alberto J. Perez" <aperez@xxxxxxxxxxxx>
• Re: Driver Merge Questions
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] PM: Thaws refrigerated and to be exited kernel threads
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 01/19] OMAP2: Add funcs for writing SMS_ROT_* registers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 00/19] OMAP: DSS2 v5 intro
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 08/19] OMAP: DSS2: Add more core files
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 07/19] OMAP: DSS2: Display Subsystem Driver core
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 04/19] OMAP: Add VRAM manager
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 06/19] OMAP: DSS2: Documentation for DSS2
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 05/19] OMAP: Add support for VRFB rotation engine
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 11/19] OMAP: DSS2: Video encoder driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 09/19] OMAP: DSS2: DISPC
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH v3 1/2] arm: a driver for on-chip ETM and ETB
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• [PATCH 15/19] OMAP: DSS2: omapfb driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 02/19] OMAP: OMAPFB: split omapfb.h
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 10/19] OMAP: DSS2: DPI driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 17/19] OMAP: DSS2: Taal DSI command mode panel driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 18/19] OMAP: SDP: Enable DSS2 for OMAP3 SDP board
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 12/19] OMAP: DSS2: RFBI driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 13/19] OMAP: DSS2: SDI driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 14/19] OMAP: DSS2: DSI driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 19/19] MAINTAINERS: Add OMAP2/3 DSS and OMAPFB maintainer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 16/19] OMAP: DSS2: Add DPI panel drivers
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 03/19] OMAP: OMAPFB: add omapdss device
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 0/3] NAND: OMAP: Fix and clean NAND driver
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 0/3] NAND: OMAP: Fix and clean NAND driver
  • From: Vimal Singh <vimal.newwork@xxxxxxxxx>
• Re: Newbie doubt
  • From: Niamathullah sharief <omapsha@xxxxxxxxx>
• Re: Driver Merge Questions
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] PM: Thaws refrigerated and to be exited kernel threads
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• Re: [PATCH 1/1] PM: Thaws refrigerated and to be exited kernel threads
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [alsa-devel] [PATCH] OMAP: McBSP: Do not use extensive spin locks for dma_op_mode
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 2/4 v2] OMAP: Configure audio_mclk for twl4030-codec MFD
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 4/5] Regulator: Adding OMAP3EVM/TWL4030 specific code in board-omap35x-pmic.c
  • From: Mike Rapoport <mike.rapoport@xxxxxxxxx>
• RE: [PATCH 4/5] Regulator: Adding OMAP3EVM/TWL4030 specific code in board-omap35x-pmic.c
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• RE: Newbie doubt
  • From: "Nagendra" <nagendra@xxxxxxxxxxxxxxxxxxxx>
• RE: Newbie doubt
  • From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
• Re: Newbie doubt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Newbie doubt
  • From: Niamathullah sharief <omapsha@xxxxxxxxx>
• omap3 otg host not working since 2.6.28?
  • From: Brad Parker <brad@xxxxxxxxxxx>
• RE: [PATCH 1/1] PM: Thaws refrigerated and to be exited kernel threads
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• RE: [PATCH 1/1] PM: Thaws refrigerated and to be exited kernel threads
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• Re: [PATCH 1/1] PM: Thaws refrigerated and to be exited kernel threads
  • From: Pavel Machek <pavel@xxxxxx>
• RE: [PATCH 1/1] PM: Thaws refrigerated and to be exited kernel threads
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• [PATCH] omap: update Pandora defconfig
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH] omap: pandora: fix keypad keymap
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 1/1] PM: Thaws refrigerated and to be exited kernel threads
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/2] omap: RX-51: enable tsc2005
  • From: Kalle Valo <kalle.valo@xxxxxx>
• Re: Config problem I suspect
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: ehci: Allow EHCI to be built on OMAP3
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH 1/2] OMAP: update mach/usb.h to allow ehci driver to build
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: New feature proposal "quickwakeup"
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• Re: New feature proposal "quickwakeup"
  • From: Falempe Jocelyn <jocelyn.falempe@xxxxxxxxxxxx>
• Re: New feature proposal "quickwakeup"
  • From: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
• RE: [PATCH] Fix race condition in omap_request_dma()
  • From: "HU TAO-TGHK48" <taohu@xxxxxxxxxxxx>
• [RFC] OMAP3: PM: twl4030 keypad wakeup with off mode
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: Config problem I suspect
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• Re: Config problem I suspect
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• New feature proposal "quickwakeup"
  • From: Falempe Jocelyn <jocelyn.falempe@xxxxxxxxxxxx>
• Re: [PATCH 5/5] Regulator: Renaming the supplies used in MMC driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: The latest 2.6.32.rc5 is very slow
  • From: "Weng, Wending" <WWeng@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] Regulator: Adding OMAP3EVM/TWL4030 specific code in board-omap35x-pmic.c
  • From: Mike Rapoport <mike.rapoport@xxxxxxxxx>
• Re: [PATCH v2] TWL4030: Initial support for TWL5031
  • From: Ilkka Koskinen <ikoskine@xxxxxxxxx>
• Re: [PATCH 5/5] Regulator: Renaming the supplies used in MMC driver
  • From: Mike Rapoport <mike.rapoport@xxxxxxxxx>
• RE: OMAP-McBSP driver not allowing suspend/resume
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• RE: The latest 2.6.32.rc5 is very slow
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH]OMAP3:PM :T2 keypad wakeup for OMAP3
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• The latest 2.6.32.rc5 is very slow
  • From: "Weng, Wending" <WWeng@xxxxxxxxxxxxxx>
• RE: OMAP-McBSP driver not allowing suspend/resume
  • From: "Wang, Jane" <jwang@xxxxxx>
• RE: OMAP-McBSP driver not allowing suspend/resume
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• OMAP-McBSP driver not allowing suspend/resume
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• RE: Config problem I suspect
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Config problem I suspect
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
• Artifacts present in AIC23 capture for 48 KHz sampling rate
  • From: "Aggarwal, Anuj" <anuj.aggarwal@xxxxxx>
• [PATCH 1/1] DSPBRIDGE: cache operation against kernel address instead of user's
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: linux on sdp2420
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>