Replace zoom2 with zoom name in board-zoom-peripherals.c file
This file has functions reused for boards: Zoom2/Zoom3/sdp3630.
Hence have all functions commonly named as zoom
Signed-off-by: Vikram Pandita <vikram.pandita@xxxxxx>
---
arch/arm/mach-omap2/board-zoom-peripherals.c | 70 +++++++++++++-------------
1 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 1bb4a8a..4ca9c20 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -87,27 +87,27 @@ static struct matrix_keymap_data board_map_data = {
.keymap_size = ARRAY_SIZE(board_keymap),
};
-static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+static struct twl4030_keypad_data zoom_kp_twl4030_data = {
.keymap_data = &board_map_data,
.rows = 8,
.cols = 8,
.rep = 1,
};
-static struct regulator_consumer_supply zoom2_vmmc1_supply = {
+static struct regulator_consumer_supply zoom_vmmc1_supply = {
.supply = "vmmc",
};
-static struct regulator_consumer_supply zoom2_vsim_supply = {
+static struct regulator_consumer_supply zoom_vsim_supply = {
.supply = "vmmc_aux",
};
-static struct regulator_consumer_supply zoom2_vmmc2_supply = {
+static struct regulator_consumer_supply zoom_vmmc2_supply = {
.supply = "vmmc",
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom2_vmmc1 = {
+static struct regulator_init_data zoom_vmmc1 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 3150000,
@@ -118,11 +118,11 @@ static struct regulator_init_data zoom2_vmmc1 = {
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
- .consumer_supplies = &zoom2_vmmc1_supply,
+ .consumer_supplies = &zoom_vmmc1_supply,
};
/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom2_vmmc2 = {
+static struct regulator_init_data zoom_vmmc2 = {
.constraints = {
.min_uV = 1850000,
.max_uV = 1850000,
@@ -133,11 +133,11 @@ static struct regulator_init_data zoom2_vmmc2 = {
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
- .consumer_supplies = &zoom2_vmmc2_supply,
+ .consumer_supplies = &zoom_vmmc2_supply,
};
/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom2_vsim = {
+static struct regulator_init_data zoom_vsim = {
.constraints = {
.min_uV = 1800000,
.max_uV = 3000000,
@@ -148,7 +148,7 @@ static struct regulator_init_data zoom2_vsim = {
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
- .consumer_supplies = &zoom2_vsim_supply,
+ .consumer_supplies = &zoom_vsim_supply,
};
static struct twl4030_hsmmc_info mmc[] __initdata = {
@@ -165,7 +165,7 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
{} /* Terminator */
};
-static int zoom2_twl_gpio_setup(struct device *dev,
+static int zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ),
@@ -178,15 +178,15 @@ static int zoom2_twl_gpio_setup(struct device *dev,
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
- zoom2_vmmc1_supply.dev = mmc[0].dev;
- zoom2_vsim_supply.dev = mmc[0].dev;
- zoom2_vmmc2_supply.dev = mmc[1].dev;
+ zoom_vmmc1_supply.dev = mmc[0].dev;
+ zoom_vsim_supply.dev = mmc[0].dev;
+ zoom_vmmc2_supply.dev = mmc[1].dev;
return 0;
}
-static int zoom2_batt_table[] = {
+static int zoom_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
@@ -197,55 +197,55 @@ static int zoom2_batt_table[] = {
4040, 3910, 3790, 3670, 3550
};
-static struct twl4030_bci_platform_data zoom2_bci_data = {
- .battery_tmp_tbl = zoom2_batt_table,
- .tblsize = ARRAY_SIZE(zoom2_batt_table),
+static struct twl4030_bci_platform_data zoom_bci_data = {
+ .battery_tmp_tbl = zoom_batt_table,
+ .tblsize = ARRAY_SIZE(zoom_batt_table),
};
-static struct twl4030_usb_data zoom2_usb_data = {
+static struct twl4030_usb_data zoom_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
-static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+static struct twl4030_gpio_platform_data zoom_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
- .setup = zoom2_twl_gpio_setup,
+ .setup = zoom_twl_gpio_setup,
};
-static struct twl4030_madc_platform_data zoom2_madc_data = {
+static struct twl4030_madc_platform_data zoom_madc_data = {
.irq_line = 1,
};
-static struct twl4030_platform_data zoom2_twldata = {
+static struct twl4030_platform_data zoom_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
- .bci = &zoom2_bci_data,
- .madc = &zoom2_madc_data,
- .usb = &zoom2_usb_data,
- .gpio = &zoom2_gpio_data,
- .keypad = &zoom2_kp_twl4030_data,
- .vmmc1 = &zoom2_vmmc1,
- .vmmc2 = &zoom2_vmmc2,
- .vsim = &zoom2_vsim,
+ .bci = &zoom_bci_data,
+ .madc = &zoom_madc_data,
+ .usb = &zoom_usb_data,
+ .gpio = &zoom_gpio_data,
+ .keypad = &zoom_kp_twl4030_data,
+ .vmmc1 = &zoom_vmmc1,
+ .vmmc2 = &zoom_vmmc2,
+ .vsim = &zoom_vsim,
};
-static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
{
I2C_BOARD_INFO("twl4030", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
- .platform_data = &zoom2_twldata,
+ .platform_data = &zoom_twldata,
},
};
static int __init omap_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
- ARRAY_SIZE(zoom2_i2c_boardinfo));
+ omap_register_i2c_bus(1, 2600, zoom_i2c_boardinfo,
+ ARRAY_SIZE(zoom_i2c_boardinfo));
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
--
1.6.5.1.69.g36942
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
