Linux on ARM based TI OMAP SoCs

• Date Index

• Re: [PATCH (for-next 2)] ASoC: Add support for IGEP v2, (continued)
  • Re: [PATCH (for-next 2)] ASoC: Add support for IGEP v2, Mike Rapoport
    • Re: [alsa-devel] [PATCH (for-next 2)] ASoC: Add support for IGEP v2, Mark Brown
• [PATCH] ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2, Reddy, Teerth
  • <Possible follow-ups>
  • [PATCH] ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2, Reddy, Teerth
    • RE: [PATCH] ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2, G, Manjunath Kondaiah
      • RE: [PATCH] ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2, Reddy, Teerth
  • [PATCH] ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2, Reddy, Teerth
• [PATCH 0/8] omap_hwmod/omap_device prep work, Kevin Hilman
  • [PATCH 1/8] OMAP3: clock: add clockdomains for UART1 & 2, Kevin Hilman
    • [PATCH 2/8] OMAP: hwmod: warn on missing clockdomain, Kevin Hilman
      • [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling, Kevin Hilman
        • [PATCH 4/8] OMAP: omap_device: deactivate latency typo, Kevin Hilman
          • [PATCH 5/8] OMAP: omap_device: add usecounting, Kevin Hilman
            • [PATCH 6/8] OMAP: omap_device: use read_persistent_clock() instead of getnstimeofday(), Kevin Hilman
              • [PATCH 7/8] OMAP: omap_device: warn about expected latencies only if non-zero, Kevin Hilman
                • [PATCH 8/8] OMAP: omap_device: use UINT_MAX for default wakeup latency limit, Kevin Hilman
                  • Re: [PATCH 8/8] OMAP: omap_device: use UINT_MAX for default wakeup latency limit, Paul Walmsley
                • Re: [PATCH 7/8] OMAP: omap_device: warn about expected latencies only if non-zero, Paul Walmsley
                  • Re: [PATCH 7/8] OMAP: omap_device: warn about expected latencies only if non-zero, Kevin Hilman
              • Re: [PATCH 6/8] OMAP: omap_device: use read_persistent_clock() instead of getnstimeofday(), Paul Walmsley
            • Re: [PATCH 5/8] OMAP: omap_device: add usecounting, Paul Walmsley
              • Re: [PATCH 5/8] OMAP: omap_device: add usecounting, Kevin Hilman
              • Re: [PATCH 5/8] OMAP: omap_device: add usecounting, Kevin Hilman
          • Re: [PATCH 4/8] OMAP: omap_device: deactivate latency typo, Paul Walmsley
            • Re: [PATCH 4/8] OMAP: omap_device: deactivate latency typo, Kevin Hilman
        • Re: [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling, Vimal Singh
          • Re: [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling, Paul Walmsley
            • Re: [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling, Kevin Hilman
              • Re: [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling, Paul Walmsley
        • Re: [PATCH 3/8] OMAP3 hwmod: Add automatic OCP_SYSCONFIG AUTOIDLE handling, Paul Walmsley
      • Re: [PATCH 2/8] OMAP: hwmod: warn on missing clockdomain, Paul Walmsley
        • Re: [PATCH 2/8] OMAP: hwmod: warn on missing clockdomain, Kevin Hilman
          • Re: [PATCH 2/8] OMAP: hwmod: warn on missing clockdomain, Paul Walmsley
    • Re: [PATCH 1/8] OMAP3: clock: add clockdomains for UART1 & 2, Paul Walmsley
      • Re: [PATCH 1/8] OMAP3: clock: add clockdomains for UART1 & 2, Paul Walmsley
• [PATCH v2] OMAP: timekeeping: time should not stop during suspend, Kevin Hilman
  • Re: [PATCH v2] OMAP: timekeeping: time should not stop during suspend, Tony Lindgren
    • Re: [PATCH v2] OMAP: timekeeping: time should not stop during suspend, Kevin Hilman
• [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort, Vikram Pandita
  • Re: [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort, Kevin Hilman
  • Re: [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort, Nishanth Menon
  • Re: [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort, Alan Cox
    • RE: [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort, Pandita, Vikram
    • RE: [PATCH v2 1/1] omap: serial: fix non-empty uart fifo read abort, Gadiyar, Anand
• [PATCH 00/12] New omap boards and rx51/n900 updates for 2.6.33, Tony Lindgren
  • [PATCH 01/12] omap1: Add board support and LCD for HTC Herald, Tony Lindgren
  • [PATCH 02/12] omap1: Add default kernel configuration for Herald, Tony Lindgren
  • [PATCH 03/12] omap3: rx51: Add SDRAM init, Tony Lindgren
  • [PATCH 04/12] omap3: rx51: Add wl1251 wlan driver support, Tony Lindgren
  • [PATCH 05/12] omap3: Add CompuLab CM-T35 board support, Tony Lindgren
  • [PATCH 06/12] omap3: Add CompuLab CM-T35 defconfig, Tony Lindgren
  • [PATCH 07/12] omap3: Add minimal IGEP v2 support, Tony Lindgren
  • [PATCH 08/12] omap: 3630sdp: introduce 3630 sdp board support, Tony Lindgren
  • [PATCH 09/12] omap: 3630sdp: defconfig creation, Tony Lindgren
  • [PATCH 10/12] omap3: Add defconfig for IGEP v2 board, Tony Lindgren
  • [PATCH 11/12] AM35xx: Add support for AM3517 EVM board, Tony Lindgren
  • [PATCH 12/12] AM35xx: Defconfig for AM3517 EVM board, Tony Lindgren
• [PATCH (for-next)] ASoC: Add support for IGEP v2, Enric Balletbo i Serra
  • Re: [PATCH (for-next)] ASoC: Add support for IGEP v2, Mike Rapoport
    • RE: [PATCH (for-next)] ASoC: Add support for IGEP v2, Gadiyar, Anand
      • Re: [PATCH (for-next)] ASoC: Add support for IGEP v2, Enric Balletbò i Serra
• Scalling_setspeed doesn't work, tarek attia
  • RE: Scalling_setspeed doesn't work, Sripathy, Vishwanath
• [PATCH] OMAP3: PM: Force write last pad config register into save area, Tero Kristo
  • Re: [PATCH] OMAP3: PM: Force write last pad config register into save area, Nishanth Menon
  • RE: [PATCH] OMAP3: PM: Force write last pad config register into save area, Gadiyar, Anand
  • Re: [PATCH] OMAP3: PM: Force write last pad config register into save area, Kevin Hilman
    • RE: [PATCH] OMAP3: PM: Force write last pad config register into save area, Tero.Kristo
    • RE: [PATCH] OMAP3: PM: Force write last pad config register into save area, Gopinath, Thara
      • Re: [PATCH] OMAP3: PM: Force write last pad config register into save area, Kevin Hilman
• [PATCH] OMAP3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards, Manjunatha GK
  • [APPLIED] [PATCH] OMAP3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards, Tony Lindgren
• Win FREE OMAP L 138 based HawkBoard !!!, Syed Mohammed, Khasim
• [PATCH 2/2] ASoC: Modifying the license string GPLv2 for OMAP3 EVM, Anuj Aggarwal
• [PATCH 1/2] ASoC: Correcting the config options in soc/omap/Makefile, Anuj Aggarwal
  • Re: [PATCH 1/2] ASoC: Correcting the config options in soc/omap/Makefile, Mark Brown
• [PATCH v2] rx51: add wl1251 wlan driver support, Kalle Valo
  • [APPLIED] [PATCH v2] rx51: add wl1251 wlan driver support, Tony Lindgren
• [PATCH 0/8] musb: Add structure 'musb_hdrc_board_data', Ajay Kumar Gupta
  • [PATCH 1/8] musb: Add structure to get board specific data, Ajay Kumar Gupta
    • [PATCH 2/8] musb: Get power (mA) from board data, Ajay Kumar Gupta
      • [PATCH 3/8] musb: Update musb_init() call for all OMAP3 boards, Ajay Kumar Gupta
        • [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards, Ajay Kumar Gupta
          • [PATCH 5/8] musb: Add 'extvbus' in musb_hdrc_board_data, Ajay Kumar Gupta
            • [PATCH 6/8] musb: set 'extvbus = 0' for OMAP3 boards, Ajay Kumar Gupta
              • [PATCH 7/8] musb: set 'extvbus = 0' for Davinci boards, Ajay Kumar Gupta
                • [PATCH 8/8] musb: set 'extvbus = 0' for Blackfin boards, Ajay Kumar Gupta
                  • Re: [PATCH 8/8] musb: set 'extvbus = 0' for Blackfin boards, Sergei Shtylyov
                • Re: [PATCH 7/8] musb: set 'extvbus = 0' for Davinci boards, Sergei Shtylyov
              • Re: [PATCH 6/8] musb: set 'extvbus = 0' for OMAP3 boards, Sergei Shtylyov
          • Re: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards, Sergei Shtylyov
            • RE: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards, Gupta, Ajay Kumar
          • Re: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards, Sergei Shtylyov
          • Re: [PATCH 4/8] musb: Update setup_usb() call for all Davinci boards, Sergei Shtylyov
        • Re: [PATCH 3/8] musb: Update musb_init() call for all OMAP3 boards, Sergei Shtylyov
          • RE: [PATCH 3/8] musb: Update musb_init() call for all OMAP3 boards, Gupta, Ajay Kumar
      • Re: [PATCH 2/8] musb: Get power (mA) from board data, Sergei Shtylyov
        • RE: [PATCH 2/8] musb: Get power (mA) from board data, Gupta, Ajay Kumar
    • Re: [PATCH 1/8] musb: Add structure to get board specific data, Sergei Shtylyov
    • Re: [PATCH 1/8] musb: Add structure to get board specific data, Sergei Shtylyov
  • Re: [PATCH 0/8] musb: Add structure 'musb_hdrc_board_data', Sergei Shtylyov
    • RE: [PATCH 0/8] musb: Add structure 'musb_hdrc_board_data', Gupta, Ajay Kumar
• [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox., C.A, Subramaniam
  • Re: [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox., Tony Lindgren
  • Re: [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox., Hiroshi DOYU
    • RE: [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox., C.A, Subramaniam
      • Re: [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox., Hiroshi DOYU
        • RE: [PATCH 8/10 v2] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox., C.A, Subramaniam
• [RFC] [PATCH] V4L2: Allow rotation between stream off-on, Y, Kishore
• [RFC] [PATCH] omap_vout: Change allocated buffer to only needed size, Y, Kishore
• [RFC] [PATCH] omap_vout: default colorspace for RGB565 set to SRGB, Y, Kishore
• insmod on beagleboard, tarek attia
• [PATCH v2] AM35xx: Clock table updates for AM3505/17, Ranjith Lohithakshan
  • RE: [PATCH v2] AM35xx: Clock table updates for AM3505/17, Lohithakshan, Ranjith
    • RE: [PATCH v2] AM35xx: Clock table updates for AM3505/17, Paul Walmsley
      • RE: [PATCH v2] AM35xx: Clock table updates for AM3505/17, Lohithakshan, Ranjith
    • RE: [PATCH v2] AM35xx: Clock table updates for AM3505/17, Paul Walmsley
      • Re: [PATCH v2] AM35xx: Clock table updates for AM3505/17, Ranjith Lohithakshan
• TFTP on beagle board, Mai Daftedar
  • Re: TFTP on beagle board, Dirk Behme
• [PATCH 00/12] Mostly board updates for 2.6.33 merge window, Tony Lindgren
  • [PATCH 01/12] omap: Cleanup the coding style in id.c, Tony Lindgren
  • [PATCH 02/12] omap: GPIO module enable/disable, Tony Lindgren
  • [PATCH 03/12] omap3: defconfigs: remove SYSFS_DEPRECATED flag, Tony Lindgren
  • [PATCH 04/12] omap3: Update 3430SDP defconfig, Tony Lindgren
  • [PATCH 05/12] omap3evm: Add board revision function, Tony Lindgren
    • RE: [PATCH 05/12] omap3evm: Add board revision function, Hiremath, Vaibhav
      • Re: [PATCH 05/12] omap3evm: Add board revision function, v2, Tony Lindgren
  • [PATCH 06/12] omap3evm: ehci: Update EHCI support on OMAP3EVM (Rev >= E), Tony Lindgren
  • [PATCH 07/12] omap3evm: Initialize vmmc and vmmc_aux regulators, Tony Lindgren
  • [PATCH 08/12] omap3evm: MIgrate to smsc911x ethernet driver, Tony Lindgren
  • [PATCH 09/12] omap3: zoom: split board file for software reuse, Tony Lindgren
    • [PATCH] omap: Fix keymap for zoom2 according to matrix keypad framwork, Tony Lindgren
  • [PATCH 10/12] omap3: zoom: rename zoom2 name to generic zoom, Tony Lindgren
  • [PATCH 11/12] omap3: zoom: Drop i2c-1 speed to 2400, Tony Lindgren
  • [PATCH 12/12] omap3: zoom: Introduce zoom3 board support, Tony Lindgren
  • [PATCH 13/12] omap: zoom3: defconfig creation, Tony Lindgren
  • [PATCH 14/12] omap: zoom2: update defconfig for LL_DEBUG_NONE, Tony Lindgren
• [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag, Vikram Pandita
  • Re: [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag, Tony Lindgren
    • RE: [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag, Pandita, Vikram
      • Re: [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag, Tony Lindgren
  • <Possible follow-ups>
  • [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag, Vikram Pandita
    • Re: [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag, Alan Cox
      • RE: [PATCH 1/2] serial: 8250: add UPF_NO_EMPTY_FIFO_READ flag, Pandita, Vikram
• [PATCH 2/2] omap: serial: fix non-empty rx uart fifo abort, Vikram Pandita
  • Re: [PATCH 2/2] omap: serial: fix non-empty rx uart fifo abort, Tony Lindgren
  • <Possible follow-ups>
  • [PATCH 2/2] omap: serial: fix non-empty rx uart fifo abort, Vikram Pandita
• Re: [v3, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Tony Lindgren
  • Re: [v3, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Janusz Krzysztofik
  • [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Janusz Krzysztofik
    • Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Tony Lindgren
      • Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Janusz Krzysztofik
        • Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Tony Lindgren
          • Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Janusz Krzysztofik
            • Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Janusz Krzysztofik
            • Re: [PATCH v4, for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Tony Lindgren
              • [PATCH v5] OMAP1: LCD_DMA: Use some define rather than a hexadecimal constant for LCD register, Janusz Krzysztofik
                • Re: [PATCH v5] OMAP1: LCD_DMA: Use some define rather than a hexadecimal constant for LCD register, Janusz Krzysztofik
                  • Re: [PATCH v5] OMAP1: LCD_DMA: Use some define rather than a hexadecimal constant for LCD register, Tony Lindgren
                • [APPLIED] [PATCH v5] OMAP1: LCD_DMA: Use some define rather than a, Tony Lindgren
• Doubts around SoC audio on omap3, Enric Balletbò i Serra
  • RE: Doubts around SoC audio on omap3, Aggarwal, Anuj
• [PATCH] OMAP: Exporting functions doing common register access, Anuj Aggarwal
  • Re: [PATCH] OMAP: Exporting functions doing common register access, Paul Walmsley
    • RE: [PATCH] OMAP: Exporting functions doing common register access, Aggarwal, Anuj
      • RE: [PATCH] OMAP: Exporting functions doing common register access, Aggarwal, Anuj
        • RE: [PATCH] OMAP: Exporting functions doing common register access, Paul Walmsley
          • Re: [PATCH] OMAP: Exporting functions doing common register access, Jarkko Nikula
            • Re: [PATCH] OMAP: Exporting functions doing common register access, Paul Walmsley
              • RE: [PATCH] OMAP: Exporting functions doing common register access, Aggarwal, Anuj
                • RE: [PATCH] OMAP: Exporting functions doing common register access, Aggarwal, Anuj
                • RE: [PATCH] OMAP: Exporting functions doing common register access, Paul Walmsley
• [PATCH v3] [OMAP3_PM] Fix zoom2/zoom3 build error, Manjunatha GK
  • Re: [PATCH v3] [OMAP3_PM] Fix zoom2/zoom3 build error, Nishanth Menon
    • Re: [PATCH v3] [OMAP3_PM] Fix zoom2/zoom3 build error, Kevin Hilman
• [PATCH] ASoC: OMAP: enable Overo driver for CM-T35, Mike Rapoport
  • Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35, Liam Girdwood
    • Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35, Mike Rapoport
      • Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35, Liam Girdwood
      • Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35, Steve Sakoman
      • Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35, Mark Brown
        • Re: [alsa-devel] [PATCH] ASoC: OMAP: enable Overo driver for CM-T35, Mike Rapoport
• [PATCH 0/3] OMAP clock and PM architecture fixes for 2.6.32-rc6, Paul Walmsley
  • [PATCH 1/3] OMAP3 clock: Fix the DPLL freqsel computations, Paul Walmsley
    • [APPLIED] [PATCH 1/3] OMAP3 clock: Fix the DPLL freqsel computations, Tony Lindgren
  • [PATCH 2/3] OMAP3: Clock: Fixed dpll3_m2x2 rate calculation, Paul Walmsley
    • [APPLIED] [PATCH 2/3] OMAP3: Clock: Fixed dpll3_m2x2 rate calculation, Tony Lindgren
  • [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors, Paul Walmsley
    • Re: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors, Russell King - ARM Linux
      • Re: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors, Paul Walmsley
        • RE: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors, Pandita, Vikram
          • Re: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors, Tony Lindgren
            • Re: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors, Tony Lindgren
              • Re: [PATCH 3/3] OMAP clock/hwmod: fix off-by-one errors, Paul Walmsley
• OMAP3515 vs 3525 inversion, Sergey Lapin
  • RE: OMAP3515 vs 3525 inversion, Premi, Sanjeev
    • Re: OMAP3515 vs 3525 inversion, Sergey Lapin
• linux-next: manual merge of the omap_dss2 tree with the omap tree, Stephen Rothwell
  • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tomi Valkeinen
    • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tony Lindgren
      • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tomi Valkeinen
        • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Stephen Rothwell
  • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Sid Boyce
    • Is the OMAP patch process badly flawed?, Sid Boyce
      • RE: Is the OMAP patch process badly flawed?, Gadiyar, Anand
        • Re: Is the OMAP patch process badly flawed?, Sid Boyce
          • RE: Is the OMAP patch process badly flawed?, Gadiyar, Anand
            • Re: Is the OMAP patch process badly flawed?, Sid Boyce
      • Re: Is the OMAP patch process badly flawed?, Felipe Contreras
        • Re: Is the OMAP patch process badly flawed?, Sid Boyce
  • <Possible follow-ups>
  • linux-next: manual merge of the omap_dss2 tree with the omap tree, Stephen Rothwell
    • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Grazvydas Ignotas
      • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tony Lindgren
        • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tomi Valkeinen
  • linux-next: manual merge of the omap_dss2 tree with the omap tree, Stephen Rothwell
    • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tomi Valkeinen
      • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Stephen Rothwell
        • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tomi Valkeinen
      • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tony Lindgren
        • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tomi Valkeinen
    • RE: linux-next: manual merge of the omap_dss2 tree with the omap tree, Hiremath, Vaibhav
  • linux-next: manual merge of the omap_dss2 tree with the omap tree, Stephen Rothwell
    • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tony Lindgren
      • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tomi Valkeinen
        • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tony Lindgren
          • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tomi Valkeinen
  • linux-next: manual merge of the omap_dss2 tree with the omap tree, Stephen Rothwell
  • linux-next: manual merge of the omap_dss2 tree with the omap tree, Stephen Rothwell
  • linux-next: manual merge of the omap_dss2 tree with the omap tree, Stephen Rothwell
  • linux-next: manual merge of the omap_dss2 tree with the omap tree, Stephen Rothwell
    • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tomi Valkeinen
      • Re: linux-next: manual merge of the omap_dss2 tree with the omap tree, Tony Lindgren
• [PATCH 0/2] Amstrad Delta: add support for LCD contrast, Janusz Krzysztofik
  • [PATCH 1/2] omapfb: lcd_ams_delta: add support for contrast control, Janusz Krzysztofik
  • [PATCH 2/2] OMAP: ams_delta_defconfig: enable LCD class device support, Janusz Krzysztofik
• Dose OMAP3 support split transfer?, jung songtan
  • RE: Dose OMAP3 support split transfer?, Gupta, Ajay Kumar
• Modifying the kernel keymap, Cory Maccarrone
  • Re: Modifying the kernel keymap, Felipe Balbi
    • Re: Modifying the kernel keymap, Cory Maccarrone
      • Re: Modifying the kernel keymap, Tony Lindgren
• CPU driver, tarek attia
  • RE: CPU driver, Menon, Nishanth
• [PATCH 0/7] musb: Add structure 'musb_hdrc_board_data', Ajay Kumar Gupta
  • [PATCH 1/7] musb: Add structure to get board specific data, Ajay Kumar Gupta
    • [PATCH 2/7] musb: Get power (mA) from board data, Ajay Kumar Gupta
      • [PATCH 3/7] musb: Update musb_init() call for all OMAP3 boards, Ajay Kumar Gupta
        • [PATCH 4/7] musb: Update setup_usb() call for all Davinci boards, Ajay Kumar Gupta
          • [PATCH 5/7] musb: Add 'extvbus' in musb_hdrc_board_data, Ajay Kumar Gupta
            • [PATCH 6/7] musb: set 'extvbus' default value to zero, Ajay Kumar Gupta
              • [PATCH 7/7] musb: set 'extvbus' for OMAP3EVM Rev >=E, Ajay Kumar Gupta
  • Re: [PATCH 0/7] musb: Add structure 'musb_hdrc_board_data', Tony Lindgren
• [PATCH] omap3: ehci: Add regulator framework, Ajay Kumar Gupta
  • RE: [PATCH] omap3: ehci: Add regulator framework, Pandita, Vikram
    • RE: [PATCH] omap3: ehci: Add regulator framework, Pandita, Vikram
  • Re: [PATCH] omap3: ehci: Add regulator framework, Mark Brown
  • <Possible follow-ups>
  • Re: [PATCH] omap3: ehci: Add regulator framework, Felipe Balbi
• [PATCH 3/3] htcherald: Add default kernel configuration for Herald, Cory Maccarrone
  • [PATCH 0/5] AI TB: Always Innovating OMAP3-based Touch Book, Gregoire Gentil
  • [PATCH 1/5] AI TB: Defconfig file of the Always Innovating OMAP3-based Touch Book., Gregoire Gentil
  • [PATCH 2/5] AI TB: Board file of the Always Innovating OMAP3-based Touch Book., Gregoire Gentil
    • Re: [PATCH 2/5] AI TB: Board file of the Always Innovating OMAP3-based Touch Book., Tony Lindgren
  • [PATCH 3/5] AI TB: Driver for the Freescale MMA7455L accelerometer, Gregoire Gentil
  • [PATCH 4/5] AI TB: Driver for the Always Innovating Touch Book keyboard., Gregoire Gentil
  • [PATCH 5/5] AI TB: Additional modifications for the Always Innovating OMAP3-based Touch Book, including video and sound., Gregoire Gentil
    • [PATCH 2/8] AI TB: Board file of Always Innovating OMAP3-based Touch Book, Gregoire Gentil
    • [PATCH 4/8] AI TB: Driver for Always Innovating OMAP3-based Touch Book keyboard, Gregoire Gentil
    • [PATCH 5/8] AI TB: HID file for Always Innovating OMAP3-based Touch Book keyboard, Gregoire Gentil
      • Re: [PATCH 5/8] AI TB: HID file for Always Innovating OMAP3-based Touch Book keyboard, Dmitry Torokhov
    • [PATCH 6/8] AI TB: Audio driver of Always Innovating OMAP3-based Touch Book, Gregoire Gentil
      • Re: [alsa-devel] [PATCH 6/8] AI TB: Audio driver of Always Innovating OMAP3-based Touch Book, Mark Brown
    • [PATCH 7/8] AI TB: Video driver of Always Innovating OMAP3-based Touch Book, Gregoire Gentil
    • [PATCH 8/8] AI TB: Additional files for Always Innovating OMAP3-based Touch Book, Gregoire Gentil
  • [APPLIED] [PATCH 3/3] htcherald: Add default kernel configuration for Herald, Tony Lindgren
• [PATCH 2/3] htcherald: Modify Makefiles and Kconfig for HTC Herald, Cory Maccarrone
  • Re: [PATCH 2/3] htcherald: Modify Makefiles and Kconfig for HTC Herald, Tony Lindgren
• [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC Herald, Cory Maccarrone
  • [APPLIED] [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC, Tony Lindgren
• Re: OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Tony Lindgren
  • Re: OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Janusz Krzysztofik
  • [PATCH v2 for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Janusz Krzysztofik
    • Re: [PATCH v3 for-next] OMAP: DMA: Use some define rather than a hexadecimal constant for LCD register, Janusz Krzysztofik
      • [APPLIED] [PATCH v3 for-next] OMAP: DMA: Use some define rather than a, Tony Lindgren
• [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Jane Wang
  • Re: [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Mark Brown
    • RE: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Wang, Jane
      • Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Mark Brown
  • Re: [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Jarkko Nikula
    • RE: [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Aggarwal, Anuj
      • RE: [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Wang, Jane
      • Message not available
        • Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Anuj Aggarwal
          • Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Peter Ujfalusi
            • Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Jarkko Nikula
              • Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Eero Nurkkala
                • Re: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Anuj Aggarwal
                  • RE: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Aggarwal, Anuj
                  • RE: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Aggarwal, Anuj
                    • RE: [alsa-devel] [PATCH 1/2] OMAP3: MCBSP: Suspend/resume failure fix, Aggarwal, Anuj
• CPUFREQ for beagle, tarek attia
  • RE: CPUFREQ for beagle, Pandita, Vikram
    • Message not available
      • RE: CPUFREQ for beagle, Pandita, Vikram
• Re: [PATCH 2/2] ASoC: OMAP: reconfigure DMA to resume audio, Mark Brown
  • RE: [PATCH 2/2] ASoC: OMAP: reconfigure DMA to resume audio, Wang, Jane
  • <Possible follow-ups>
  • [PATCH 2/2] ASoC: OMAP: reconfigure DMA to resume audio, Jane Wang
    • Re: [PATCH 2/2] ASoC: OMAP: reconfigure DMA to resume audio, Jarkko Nikula
• [PATCH v4] OMAP: GPIO module enable/disable, Charulatha V
  • [APPLIED] [PATCH v4] OMAP: GPIO module enable/disable, Tony Lindgren
• [PATCH 9/10] omap: mailbox: OMAP4 Mailbox Patch to change the IRQ, C.A, Subramaniam
• [PATCH 8/10] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox, C.A, Subramaniam
  • Re: [PATCH 8/10] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox, Tony Lindgren
    • RE: [PATCH 8/10] omap mailbox: OMAP4-Mailbox - Adds code changes to support OMAP4 mailbox, C.A, Subramaniam
• [PATCH 6/10] omap: mailbox: remove unnecessary arg for, C.A, Subramaniam
• [PATCH 5/10] omap: mailbox: remove disable_/enable_mbox_irq in isr, C.A, Subramaniam
• [PATCH 4/10] omap: mailbox: remove class interface, C.A, Subramaniam
• [PATCH 3/10] omap: mailbox: remove sequence bit checking, C.A, Subramaniam
• [PATCH 2/10] omap: mailbox: OMAP4 - Add resources, C.A, Subramaniam
• [PATCH 1/10] omap: mailbox: Add build specific changes to support omap mailbox, C.A, Subramaniam
• [PATCH 0/10] omap mailbox: Refreshed patch series for-next branch, C.A, Subramaniam
• [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2 board (rev B), Enric Balletbo i Serra
  • [PATCH 2/2 (for-next)] ARM: OMAP3: Add defconfig for IGEP v2 board, Enric Balletbo i Serra
    • [APPLIED] [PATCH 2/2 (for-next)] ARM: OMAP3: Add defconfig for IGEP v2 board, Tony Lindgren
  • [APPLIED] [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2, Tony Lindgren
  • <Possible follow-ups>
  • Re: [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2 board (rev B), Frédéric BEGOU
    • Re: [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2 board (rev B), Daniel Toussaint
  • Re: [PATCH 1/2 (for-next)] ARM: OMAP3: Add support for the IGEP v2 board (rev B), Frédéric BEGOU
• [PATCH v2] omap3: Change the default silicon, Sanjeev Premi
• n800/810 boot log, Gadiyar, Anand
  • Re: n800/810 boot log, green
    • RE: n800/810 boot log, Gadiyar, Anand
• [PATCHv3 1/3] OMAP UART: Add omap-serial driver support., Govindraj.R
  • Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support., Artem Bityutskiy
    • Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support., Govindraj
  • Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support., Kevin Hilman
    • Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support., Govindraj
      • Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support., Kevin Hilman
  • Re: [PATCHv3 1/3] OMAP UART: Add omap-serial driver support., Kevin Hilman
• [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., Govindraj.R
  • Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., Govindraj
    • Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., Olof Johansson
      • RE: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., G, Manjunath Kondaiah
        • Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., Olof Johansson
          • RE: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., Shilimkar, Santosh
            • RE: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., G, Manjunath Kondaiah
              • Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., Olof Johansson
                • Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., Tony Lindgren
                  • Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., Kevin Hilman
    • Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., Olof Johansson
      • Re: [PATCHv3 0/3] OMAP UART: Adding support for omap-serial driver., Kevin Hilman
• [PATCH 0/9 v2] omap3: pm: introduce support for 3630 OPPs, Nishanth Menon
  • [PATCH 1/9] omap3: pm: introduce enabled flag to omap_opp, Nishanth Menon
    • [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Nishanth Menon
      • [PATCH 3/9] omap3: pm: srf: use opp accessor function, Nishanth Menon
        • [PATCH 4/9] omap3: pm: use opp accessor functions for omap-target, Nishanth Menon
          • [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Nishanth Menon
            • [PATCH 6/9] omap3: clk: use pm accessor functions for cpufreq table, Nishanth Menon
              • [PATCH 7/9] omap3: pm: remove VDDx_MIN/MAX macros, Nishanth Menon
                • [PATCH 8/9 v2] omap3: pm: introduce dynamic OPP, Nishanth Menon
                  • [PATCH 9/9 v2] omap3: pm: introduce 3630 opps, Nishanth Menon
                    • Re: [PATCH 9/9 v2] omap3: pm: introduce 3630 opps, Jon Hunter
                    • RE: [PATCH 9/9 v2] omap3: pm: introduce 3630 opps, Sripathy, Vishwanath
                  • Re: [PATCH 8/9 v2] omap3: pm: introduce dynamic OPP, Kevin Hilman
                    • Re: [PATCH 8/9 v2] omap3: pm: introduce dynamic OPP, Menon, Nishanth
      • Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Kevin Hilman
        • Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Menon, Nishanth
          • Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Nishanth Menon
            • Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Kevin Hilman
              • Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Nishanth Menon
                • Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Nishanth Menon
                  • RE: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Cousson, Benoit
                    • Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Menon, Nishanth
                      • RE: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Cousson, Benoit
                        • Re: [PATCH 2/9 v2] omap3: pm: introduce opp accessor functions, Menon, Nishanth
• Some patches need reposting, inbox cleared, patchwork cleared, Tony Lindgren
  • RE: Some patches need reposting, inbox cleared, patchwork cleared, Gadiyar, Anand
    • RE: Some patches need reposting, inbox cleared, patchwork cleared, Gadiyar, Anand
      • Re: Some patches need reposting, inbox cleared, patchwork cleared, Tony Lindgren
        • RE: Some patches need reposting, inbox cleared, patchwork cleared, Pandita, Vikram
          • Re: Some patches need reposting, inbox cleared, patchwork cleared, Tony Lindgren
            • RE: Some patches need reposting, inbox cleared, patchwork cleared, Pandita, Vikram
              • RE: Some patches need reposting, inbox cleared, patchwork cleared, Pandita, Vikram
                • Re: Some patches need reposting, inbox cleared, patchwork cleared, Tony Lindgren
                  • RE: Some patches need reposting, inbox cleared, patchwork cleared, Aggarwal, Anuj
                    • Re: Some patches need reposting, inbox cleared, patchwork cleared, Tony Lindgren
        • RE: Some patches need reposting, inbox cleared, patchwork cleared, Gadiyar, Anand
• [PATCH 00/14] Omap low-level device init updates for 2.6.33, Tony Lindgren
  • [PATCH 01/14] omap: update plat/usb.h to allow ehci driver to build, Tony Lindgren
  • [PATCH 02/14] omap: Add platform init code for EHCI driver, Tony Lindgren
  • [PATCH 03/14] omap: iommu: avoid remapping if it's been mapped in MPU side, Tony Lindgren
  • [PATCH 04/14] omap: iovmm: remove cache flush operation, Tony Lindgren
  • [PATCH 05/14] omap: iommu: reorganize, Tony Lindgren
  • [PATCH 06/14] omap: McBSP: Do not use extensive spin locks for dma_op_mode, Tony Lindgren
  • [PATCH 07/14] omap3630: Add HSMMC related checks, Tony Lindgren
  • [PATCH 08/14] omap3630: Configure HSMMC1 to 4-bit, Tony Lindgren
  • [PATCH 09/14] omap3630: Set omap3630 MMC1 I/O speed to 52Mhz, Tony Lindgren
  • [PATCH 10/14] omap3: HSMMC2 8-bit mux configuration, Tony Lindgren
  • [PATCH 11/14] omap3: evm: make HSMMC driver built-in, Tony Lindgren
  • [PATCH 12/14] omap3: move check_revision above check_features, Tony Lindgren
    • Re: [PATCH 12/14] omap3: move check_revision above check_features, v2, Tony Lindgren
  • [PATCH 13/14] omap3: keep SoC features on the same line, Tony Lindgren
  • [PATCH 14/14] omap3: drop all IVA-related address base definitions, Tony Lindgren
• [PATCH] OMAP3: keep SoC features on the same line, Kevin Hilman
  • [APPLIED] [PATCH] OMAP3: keep SoC features on the same line, Tony Lindgren
• Re: [1/3] omap3evm: ehci: Add EHCI padconfig for board Rev >= E, Tony Lindgren
  • [build errro on for-next branch] RE: [1/3] omap3evm: ehci: Add EHCI padconfig for board Rev >= E, Gupta, Ajay Kumar
    • Re: [build errro on for-next branch] RE: [1/3] omap3evm: ehci: Add EHCI padconfig for board Rev >= E, Tony Lindgren
• [APPLIED] [PATCH v2 1/2] Revert "[IA64] prevent ia64 from invoking irq, Tony Lindgren
• [PATCH v3] omap3-iommu: reorganize, Felipe Contreras
  • [APPLIED] [PATCH v3] omap3-iommu: reorganize, Tony Lindgren
• [GIT PULL] omap-fixes for v2.6.32-rc6, Tony Lindgren
• [PATCH 0/6] Idle status patches revisited, Tero Kristo
  • [PATCH 1/6] OMAP: Powerdomains: Add support for INACTIVE state on pwrdm level, Tero Kristo
    • [PATCH 2/6] OMAP3: PM: Added support for INACTIVE and ON states for powerdomains, Tero Kristo
      • [PATCH 3/6] OMAP3: CPUidle: Fixed support for ON / INACTIVE states, Tero Kristo
        • [PATCH 4/6] OMAP3: PM: Removed PER + CORE state hacking from omap_sram_idle, Tero Kristo
          • [PATCH 5/6] OMAP: Powerdomains: Add support for checking if pwrdm can idle, Tero Kristo
            • [PATCH 6/6] OMAP3: CPUidle: Added peripheral pwrdm checks into bm check, Tero Kristo
              • Re: [PATCH 6/6] OMAP3: CPUidle: Added peripheral pwrdm checks into bm check, Kevin Hilman
                • RE: [PATCH 6/6] OMAP3: CPUidle: Added peripheral pwrdm checks into bm check, Tero.Kristo
            • Re: [PATCH 5/6] OMAP: Powerdomains: Add support for checking if pwrdm can idle, Kevin Hilman
              • RE: [PATCH 5/6] OMAP: Powerdomains: Add support for checking if pwrdm can idle, Tero.Kristo
          • Re: [PATCH 4/6] OMAP3: PM: Removed PER + CORE state hacking from omap_sram_idle, Kevin Hilman
            • RE: [PATCH 4/6] OMAP3: PM: Removed PER + CORE state hacking from omap_sram_idle, Tero.Kristo
      • Re: [PATCH 2/6] OMAP3: PM: Added support for INACTIVE and ON states for powerdomains, Kevin Hilman
        • RE: [PATCH 2/6] OMAP3: PM: Added support for INACTIVE and ON states for powerdomains, Tero.Kristo
  • Re: [PATCH 0/6] Idle status patches revisited, Kevin Hilman
• Linux-2.;6.29 needed, tarek attia
• [PATCH 2/4] Add omap3_devkit8000_defconfig, Kim Botherway
  • Re: [PATCH 2/4] Add omap3_devkit8000_defconfig, Vimal Singh
• [PATCH 3/4] Add support for DEVKIT8000 LCD, Kim Botherway
  • Re: [PATCH 3/4] Add support for DEVKIT8000 LCD, Vimal Singh
  • Re: [PATCH 3/4] Add support for DEVKIT8000 LCD, Tomi Valkeinen
    • Re: [PATCH 3/4] Add support for DEVKIT8000 LCD, Daniel Toussaint
    • Message not available
      • Re: [PATCH 3/4] Add support for DEVKIT8000 LCD, Tomi Valkeinen
• [PATCHv3 0/5] Misc fixes [for PM branch], Tero Kristo
  • [PATCH 1/5] OMAP3: Fixed ARM aux ctrl register save/restore, Tero Kristo
    • [PATCH 2/5] OMAP3: PM: Disabled I2C4 repeated start operation mode, Tero Kristo
      • [PATCH 3/5] OMAP3: PM: Added support for L2 aux ctrl register save and restore, Tero Kristo
        • [PATCH 4/5] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop, Tero Kristo
          • [PATCH 5/5] OMAP3: PM: Disable OTG autoidle when waking up from off-mode, Tero Kristo
            • Re: [PATCH 5/5] OMAP3: PM: Disable OTG autoidle when waking up from off-mode, Kevin Hilman
              • RE: [PATCH 5/5] OMAP3: PM: Disable OTG autoidle when waking up from off-mode, Gadiyar, Anand
                • Re: [PATCH 5/5] OMAP3: PM: Disable OTG autoidle when waking up from off-mode, Eduardo Valentin
                  • [PATCH 1/1] OMAP3: PM: Fix OTG autoidle workaround, Eduardo Valentin
                    • RE: [PATCH 1/1] OMAP3: PM: Fix OTG autoidle workaround, Gadiyar, Anand
                      • [PATCHv2 1/1] OMAP3: PM: Fix OTG autoidle workaround, Eduardo Valentin
                        • Re: [PATCHv2 1/1] OMAP3: PM: Fix OTG autoidle workaround, Felipe Balbi
                          • Re: [PATCHv2 1/1] OMAP3: PM: Fix OTG autoidle workaround, Tony Lindgren
                        • Re: [PATCHv2 1/1] OMAP3: PM: Fix OTG autoidle workaround, Kevin Hilman
          • Re: [PATCH 4/5] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop, Kevin Hilman
      • Re: [PATCH 2/5] OMAP3: PM: Disabled I2C4 repeated start operation mode, Kevin Hilman
    • RE: [PATCH 1/5] OMAP3: Fixed ARM aux ctrl register save/restore, Gopinath, Thara
• [PATCH 4/4] Add ASoC support for DEVKIT8000, Kim Botherway
  • Re: [PATCH 4/4] Add ASoC support for DEVKIT8000, Vimal Singh
  • Re: [PATCH 4/4] Add ASoC support for DEVKIT8000, Mark Brown
• [PATCH 1/4] Add minimal support for DEVKIT8000, Kim Botherway
  • Re: [PATCH 1/4] Add minimal support for DEVKIT8000, Felipe Balbi
    • Re: [PATCH 1/4] Add minimal support for DEVKIT8000, Thomas Weber
      • Re: [PATCH 1/4] Add minimal support for DEVKIT8000, Thomas Weber
      • Re: [PATCH 1/4] Add minimal support for DEVKIT8000, Felipe Balbi
  • <Possible follow-ups>
  • [PATCH 1/4] Add minimal support for DEVKIT8000, Thomas Weber
• [PATCH] Fixing keymap for zoom2 according to matrix keypad framwork, Vimal Singh
  • [APPLIED] [PATCH] Fixing keymap for zoom2 according to matrix keypad framwork, Tony Lindgren
• [PATCH] omap: zoom3: remove SYSFS_DEPRECATED from defconfig, Anand Gadiyar
• [PATCH] omap: zoom3: Update defconfig for USB, Anand Gadiyar
• [PATCH] omap: 3630sdp: Update defconfig for USB, Anand Gadiyar
• [PATCH 0/9] OMAP3: PM: introduce support for 3630 OPPs, Nishanth Menon
  • [PATCH 1/9] omap3: pm: introduce enabled flag to omap_opp, Nishanth Menon
    • [PATCH 2/9] omap3: pm: introduce opp accessor functions, Nishanth Menon
      • [PATCH 3/9] omap3: pm: srf: introduce accessor function, Nishanth Menon
        • [PATCH 4/9] omap3: pm: use opp accessor functions for omap-target, Nishanth Menon
          • [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Nishanth Menon
            • [PATCH 6/9] omap3: clk: use pm accessor functions for cpufreq table, Nishanth Menon
              • [PATCH 7/9] omap3: pm: remove VDDx_MIN/MAX macros, Nishanth Menon
                • [PATCH 8/9] omap3: pm: introduce dynamic OPP, Nishanth Menon
                  • [PATCH 9/9] omap3: pm: introduce 3630 opps, Nishanth Menon
            • Re: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Kevin Hilman
              • Re: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Menon, Nishanth
                • Re: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Kevin Hilman
                  • Re: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Nishanth Menon
                    • Re: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Kevin Hilman
                    • RE: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Sripathy, Vishwanath
                      • Re: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Romit Dasgupta
                        • RE: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Sripathy, Vishwanath
                      • Re: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Nishanth Menon
                        • Re: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Nishanth Menon
              • Re: [PATCH 5/9] omap3: pm: sr: replace get_opp with freq_to_opp, Romit Dasgupta
• [PATCH 00/10] omap am35xx, 3630, 7xx cpu changes for merge window after 2.6.32, Tony Lindgren
  • [PATCH 01/10] omap: Eliminate OMAP_MAX_NR_PORTS, Tony Lindgren
  • [PATCH 02/10] omap: introduce OMAP_LL_DEBUG_NONE DEBUG_LL config, Tony Lindgren
  • [PATCH 03/10] omap1: mmc: Add platform init for omap7xx, Tony Lindgren
  • [PATCH 04/10] omap1: omap_udc: Add clocking and disable vbus sense for omap7xx, Tony Lindgren
  • [PATCH 05/10] omap3: Runtime detection of Si features, Tony Lindgren
  • [PATCH 06/10] omap3: Runtime detection of OMAP35x devices, Tony Lindgren
  • [PATCH 07/10] omap3: Introduce OMAP3630, Tony Lindgren
  • [PATCH 08/10] omap3: 3630: update is_chip variable, Tony Lindgren
  • [PATCH 09/10] omap3: AM35xx: Runtime detection of the device, Tony Lindgren
  • [PATCH 10/10] omap3: AM35xx: Initialize omap_chip bits, Tony Lindgren
• MMC related patches, Madhusudhan
  • Re: MMC related patches, Tony Lindgren
    • RE: MMC related patches, Madhusudhan
      • Re: MMC related patches, Tony Lindgren
• [PATCH v3 0/8] introduce 3630 boards, Vikram Pandita
  • [PATCH v3 1/8] omap: zoom2: split board file for software reuse, Vikram Pandita
    • [PATCH v3 2/8] omap: zoom: rename zoom2 name to generic zoom, Vikram Pandita
      • [PATCH v3 3/8] omap: zoom: drop i2c-1 speed to 2400, Vikram Pandita
        • [PATCH v3 4/8] omap: zoom3: introduce zoom3 board support, Vikram Pandita
          • [PATCH v3 5/8] omap: 3630sdp: introduce 3630 sdp board support, Vikram Pandita
            • [PATCH v3 6/8] omap: zoom2: update defconfig for LL_DEBUG_NONE, Vikram Pandita
              • [PATCH v3 7/8] omap: zoom3: defconfig creation, Vikram Pandita
                • [PATCH v3 8/8] omap: 3630sdp: defconfig creation, Vikram Pandita
                  • [APPLIED] [PATCH v3 8/8] omap: 3630sdp: defconfig creation, Tony Lindgren
                • [APPLIED] [PATCH v3 7/8] omap: zoom3: defconfig creation, Tony Lindgren
              • [APPLIED] [PATCH v3 6/8] omap: zoom2: update defconfig for LL_DEBUG_NONE, Tony Lindgren
            • [APPLIED] [PATCH v3 5/8] omap: 3630sdp: introduce 3630 sdp board support, Tony Lindgren
          • [APPLIED] [PATCH v3 4/8] omap: zoom3: introduce zoom3 board support, Tony Lindgren
        • [APPLIED] [PATCH v3 3/8] omap: zoom: drop i2c-1 speed to 2400, Tony Lindgren
        • Re: [PATCH v3 3/8] omap: zoom: drop i2c-1 speed to 2400, Tony Lindgren
      • [APPLIED] [PATCH v3 2/8] omap: zoom: rename zoom2 name to generic zoom, Tony Lindgren
    • [APPLIED] [PATCH v3 1/8] omap: zoom2: split board file for software reuse, Tony Lindgren
• N810: problem with watchdog, Francisco Alecrim
• [GIT] pull request: PM CPUidle base support, Kevin Hilman
• [GIT] pull request: PM off-mode for 2.6.33, Kevin Hilman
• [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer, chudson
  • [RFC PATCH v3 2/3] mach-omap2:kxte9 accelerometer support for OMAP ZoomII, chudson
    • [RFC PATCH v3 3/3] mach-omap2:kxte9 accelerometer mux support for OMAP ZoomII, chudson
  • RE: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer, Pandita, Vikram
    • Re: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer, Chris Hudson
      • RE: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer, Pandita, Vikram
        • Re: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer, Chris Hudson
  • <Possible follow-ups>
  • [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer, chudson
    • [RFC PATCH v3 2/3] mach-omap2:kxte9 accelerometer support for OMAP ZoomII, chudson
      • [RFC PATCH v3 3/3] mach-omap2:kxte9 accelerometer mux support for OMAP ZoomII, chudson
    • Re: [RFC PATCH v3 1/3] input:misc:driver support for Kionix kxte9 accelerometer, Chris Hudson
• Linux_KERNEL UPDATE, tarek attia
• power_management in beagleboard, tarek attia
• [PATCH 4/4] Regulator: Modifying Kconfig to choose from the available PMICs, Anuj Aggarwal
• [PATCH 3/4] Regulator: Modifying board-3430sdp.c to use PMIC-init-macros or wrappers, Anuj Aggarwal
• [PATCH 2/4] Regulator: Modifying board-omap3evm.c to use PMIC-init-macros or wrappers, Anuj Aggarwal
• [PATCH 1/4] Regulator: Adding header file for initializing OMAP35x PMICs, Anuj Aggarwal
  • Re: [PATCH 1/4] Regulator: Adding header file for initializing OMAP35x PMICs, Mark Brown
• [PATCH 0/4] Regulator: Providing regulator initialization macros/wrappers, Anuj Aggarwal
• [PATCH 0/3] omap3: cm-t35 updates, Mike Rapoport
  • [PATCH 2/3] omap3: cm-t35: use matrix_keyboard, Mike Rapoport
  • [PATCH 3/3] omap3: cm-t35: add support for baseboard ehternet, Mike Rapoport
  • [PATCH 1/3] omap3: cm-t35: update led polarity, Mike Rapoport
  • Re: [PATCH 0/3] omap3: cm-t35 updates, Tony Lindgren
• [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them, Romit Dasgupta
  • Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them, Pavel Machek
    • Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them, Rafael J. Wysocki
      • Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them, Romit Dasgupta
        • Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them, Rafael J. Wysocki
      • Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them, Jens Axboe
        • Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them, Rafael J. Wysocki
          • Re: [PATCH 1/1]: Thaws refrigerated bdi flusher threads before invoking kthread_stop on them, Romit Dasgupta