'Signed-off-by' missing.
On Thu, Nov 12, 2009 at 3:53 PM, Kim Botherway <kbotherway@xxxxxxxxxxx> wrote:
> This patch add support for the Timll DEVKIT8000 LCD panel
>
>
> diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
> index b63b198..b906d25 100644
> --- a/drivers/video/omap/Makefile
> +++ b/drivers/video/omap/Makefile
> @@ -33,6 +33,7 @@ objs-y$(CONFIG_MACH_OMAP_LDP) += lcd_ldp.o
> objs-y$(CONFIG_MACH_OMAP2EVM) += lcd_omap2evm.o
> objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o
> objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o
> +objs-y$(CONFIG_MACH_OMAP3_DEVKIT8000) += lcd_omap3devkit8000.o
> objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
> objs-y$(CONFIG_MACH_OVERO) += lcd_overo.o
>
> diff --git a/drivers/video/omap/lcd_omap3devkit8000.c
> b/drivers/video/omap/lcd_omap3devkit8000.c
> new file mode 100644
> index 0000000..242cece
> --- /dev/null
> +++ b/drivers/video/omap/lcd_omap3devkit8000.c
> @@ -0,0 +1,132 @@
> +/*
> + * LCD panel support for the TI OMAP3 Beagle board
> + *
> + * Author: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
> + *
> + * Derived from drivers/video/omap/lcd-omap3evm.c
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/gpio.h>
> +#include <linux/i2c/twl4030.h>
> +
> +#include <plat/mux.h>
> +#include <plat/omapfb.h>
> +#include <asm/mach-types.h>
> +
> +#define LCD_PANEL_ENABLE_GPIO 170
> +
> +static int omap3devkit8000_panel_init(struct lcd_panel *panel,
> + struct omapfb_device *fbdev)
> +{
> + gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable");
> + return 0;
> +}
> +
> +static void omap3devkit8000_panel_cleanup(struct lcd_panel *panel)
> +{
> + gpio_free(LCD_PANEL_ENABLE_GPIO);
> +}
> +
> +static int omap3devkit8000_panel_enable(struct lcd_panel *panel)
> +{
> + gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1);
> + return 0;
> +}
> +
> +static void omap3devkit8000_panel_disable(struct lcd_panel *panel)
> +{
> + gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0);
> +}
> +
> +static unsigned long omap3devkit8000_panel_get_caps(struct lcd_panel
> *panel)
> +{
> + return 0;
> +}
> +
> +struct lcd_panel omap3devkit8000_panel = {
> + .name = "omap3devkit8000",
> + .config = OMAP_LCDC_PANEL_TFT,
> + .bpp = 16,
> + .data_lines = 24,
> +
> + .name = "7inch_LCD",
> + .x_res = 800,
> + .y_res = 480,
> + .hsw = 48, /* hsync_len (4) - 1 */
> + .hfp = 1, /* right_margin (4) - 1 */
> + .hbp = 1, /* left_margin (40) - 1 */
> + .vsw = 3, /* vsync_len (2) - 1 */
> + .vfp = 12, /* lower_margin */
> + .vbp = 25, /* upper_margin (8) - 1 */
> + .pixel_clock = 36000,
> +
> + .init = omap3devkit8000_panel_init,
> + .cleanup = omap3devkit8000_panel_cleanup,
> + .enable = omap3devkit8000_panel_enable,
> + .disable = omap3devkit8000_panel_disable,
> + .get_caps = omap3devkit8000_panel_get_caps,
> +
> +};
> +
> +
> +static int omap3devkit8000_panel_probe(struct platform_device *pdev)
> +{
> + omapfb_register_panel(&omap3devkit8000_panel);
> + return 0;
> +}
> +
> +static int omap3devkit8000_panel_remove(struct platform_device *pdev)
> +{
> + return 0;
> +}
> +
> +static int omap3devkit8000_panel_suspend(struct platform_device *pdev,
> + pm_message_t mesg)
> +{
> + return 0;
> +}
> +
> +static int omap3devkit8000_panel_resume(struct platform_device *pdev)
> +{
> + return 0;
> +}
> +
> +struct platform_driver omap3devkit8000_panel_driver = {
> + .probe = omap3devkit8000_panel_probe,
> + .remove = omap3devkit8000_panel_remove,
> + .suspend = omap3devkit8000_panel_suspend,
> + .resume = omap3devkit8000_panel_resume,
> + .driver = {
> + .name = "omap3devkit8000_lcd",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init omap3devkit8000_panel_drv_init(void)
> +{
> + return platform_driver_register(&omap3devkit8000_panel_driver);
> +}
> +
> +static void __exit omap3devkit8000_panel_drv_exit(void)
> +{
> + platform_driver_unregister(&omap3devkit8000_panel_driver);
> +}
> +
> +module_init(omap3devkit8000_panel_drv_init);
> +module_exit(omap3devkit8000_panel_drv_exit);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Regards,
Vimal Singh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
