* Gregoire Gentil <gregoire@xxxxxxxxxx> [091115 20:29]:
> Board file of the Always Innovating OMAP3-based Touch Book.
Cool. Looks like the patch needs to be formatted with tabs,
see Documentation/Submit* files.
Then run scripts/checkpatch.pl --strict /path/to/your/patch
on each of them to check for obvious issues :)
Then resend the patches to the related mailing lists:
To linux-omap list:
1. This patch reformatted
2. Defconfig
To linux-input list with linux-omap Cc'd:
3. ...
4. ...
To alsa-devel list with linux-omap Cc'd:
5. ...
Please see the MAINTAINERS file for the file paths of the
maintainers and mailing lists.
Regards,
Tony
>
>
>
>
> Signed-off-by: Gregoire Gentil <gregoire@xxxxxxxxxx>
> ---
> arch/arm/mach-omap2/board-omap3touchbook.c | 683
> ++++++++++++++++++++++++++++
> 1 files changed, 683 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-omap2/board-omap3touchbook.c
>
> diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c
> b/arch/arm/mach-omap2/board-omap3touchbook.c
> new file mode 100644
> index 0000000..ad3ef6e
> --- /dev/null
> +++ b/arch/arm/mach-omap2/board-omap3touchbook.c
> @@ -0,0 +1,683 @@
> +/*
> + * linux/arch/arm/mach-omap2/board-omap3touchbook.c
> + *
> + * Copyright (C) 2009 Always Innovating
> + *
> + * Modified from mach-omap2/board-omap3beagleboard.c
> + *
> + * Initial code: Grégoire Gentil, Tim Yamin
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/leds.h>
> +#include <linux/gpio.h>
> +#include <linux/input.h>
> +#include <linux/gpio_keys.h>
> +
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/mtd/nand.h>
> +
> +#include <plat/mcspi.h>
> +#include <linux/spi/spi.h>
> +
> +#include <linux/spi/ads7846.h>
> +#include <linux/mma7455l.h>
> +
> +#include <plat/dmtimer.h>
> +#include <linux/backlight.h>
> +
> +#include <linux/regulator/machine.h>
> +#include <linux/i2c/twl4030.h>
> +
> +#include <mach/hardware.h>
> +#include <asm/mach-types.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +#include <asm/mach/flash.h>
> +
> +#include <plat/board.h>
> +#include <plat/common.h>
> +#include <plat/gpmc.h>
> +#include <plat/nand.h>
> +#include <plat/mux.h>
> +#include <plat/usb.h>
> +#include <plat/timer-gp.h>
> +
> +#include "mmc-twl4030.h"
> +
> +#include <asm/setup.h>
> +
> +#define GPMC_CS0_BASE 0x60
> +#define GPMC_CS_SIZE 0x30
> +
> +#define NAND_BLOCK_SIZE SZ_128K
> +
> +#define OMAP3_AC_GPIO 136
> +#define OMAP3_TS_GPIO 162
> +#define TB_BL_PWM_TIMER 9
> +#define TB_KILL_POWER_GPIO 168
> +
> +unsigned long touchbook_revision;
> +
> +static struct mtd_partition omap3touchbook_nand_partitions[] = {
> + /* All the partition sizes are listed in terms of NAND block size */
> + {
> + .name = "X-Loader",
> + .offset = 0,
> + .size = 4 * NAND_BLOCK_SIZE,
> + .mask_flags = MTD_WRITEABLE, /* force read-only */
> + },
> + {
> + .name = "U-Boot",
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
> + .size = 15 * NAND_BLOCK_SIZE,
> + .mask_flags = MTD_WRITEABLE, /* force read-only */
> + },
> + {
> + .name = "U-Boot Env",
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
> + .size = 1 * NAND_BLOCK_SIZE,
> + },
> + {
> + .name = "Kernel",
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
> + .size = 32 * NAND_BLOCK_SIZE,
> + },
> + {
> + .name = "File System",
> + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
> + .size = MTDPART_SIZ_FULL,
> + },
> +};
> +
> +static struct omap_nand_platform_data omap3touchbook_nand_data = {
> + .options = NAND_BUSWIDTH_16,
> + .parts = omap3touchbook_nand_partitions,
> + .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions),
> + .dma_channel = -1, /* disable DMA in OMAP NAND driver */
> + .nand_setup = NULL,
> + .dev_ready = NULL,
> +};
> +
> +static struct resource omap3touchbook_nand_resource = {
> + .flags = IORESOURCE_MEM,
> +};
> +
> +static struct platform_device omap3touchbook_nand_device = {
> + .name = "omap2-nand",
> + .id = -1,
> + .dev = {
> + .platform_data = &omap3touchbook_nand_data,
> + },
> + .num_resources = 1,
> + .resource = &omap3touchbook_nand_resource,
> +};
> +
> +#include "sdram-micron-mt46h32m32lf-6.h"
> +
> +static struct twl4030_hsmmc_info mmc[] = {
> + {
> + .mmc = 1,
> + .wires = 8,
> + .gpio_wp = 29,
> + },
> + {} /* Terminator */
> +};
> +
> +static struct platform_device omap3_touchbook_lcd_device = {
> + .name = "omap3touchbook_lcd",
> + .id = -1,
> +};
> +
> +static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
> + .ctrl_name = "internal",
> +};
> +
> +static struct regulator_consumer_supply touchbook_vmmc1_supply = {
> + .supply = "vmmc",
> +};
> +
> +static struct regulator_consumer_supply touchbook_vsim_supply = {
> + .supply = "vmmc_aux",
> +};
> +
> +static struct gpio_led gpio_leds[];
> +
> +static int touchbook_twl_gpio_setup(struct device *dev,
> + unsigned gpio, unsigned ngpio)
> +{
> + if (system_rev >= 0x20 && system_rev <= 0x34301000) {
> + omap_cfg_reg(AG9_34XX_GPIO23);
> + mmc[0].gpio_wp = 23;
> + } else {
> + omap_cfg_reg(AH8_34XX_GPIO29);
> + }
> + /* gpio + 0 is "mmc0_cd" (input/IRQ) */
> + mmc[0].gpio_cd = gpio + 0;
> + twl4030_mmc_init(mmc);
> +
> + /* link regulators to MMC adapters */
> + touchbook_vmmc1_supply.dev = mmc[0].dev;
> + touchbook_vsim_supply.dev = mmc[0].dev;
> +
> + /* REVISIT: need ehci-omap hooks for external VBUS
> + * power switch and overcurrent detect
> + */
> +
> + gpio_request(gpio + 1, "EHCI_nOC");
> + gpio_direction_input(gpio + 1);
> +
> + /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
> + gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
> + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
> +
> + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
> + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
> +
> + return 0;
> +}
> +
> +static struct twl4030_gpio_platform_data touchbook_gpio_data = {
> + .gpio_base = OMAP_MAX_GPIO_LINES,
> + .irq_base = TWL4030_GPIO_IRQ_BASE,
> + .irq_end = TWL4030_GPIO_IRQ_END,
> + .use_leds = true,
> + .pullups = BIT(1),
> + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
> + | BIT(15) | BIT(16) | BIT(17),
> + .setup = touchbook_twl_gpio_setup,
> +};
> +
> +static struct regulator_consumer_supply touchbook_vdac_supply = {
> + .supply = "vdac",
> + .dev = &omap3_touchbook_lcd_device.dev,
> +};
> +
> +static struct regulator_consumer_supply touchbook_vdvi_supply = {
> + .supply = "vdvi",
> + .dev = &omap3_touchbook_lcd_device.dev,
> +};
> +
> +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max
> 220 mA) */
> +static struct regulator_init_data touchbook_vmmc1 = {
> + .constraints = {
> + .min_uV = 1850000,
> + .max_uV = 3150000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
> + | REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = 1,
> + .consumer_supplies = &touchbook_vmmc1_supply,
> +};
> +
> +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
> +static struct regulator_init_data touchbook_vsim = {
> + .constraints = {
> + .min_uV = 1800000,
> + .max_uV = 3000000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
> + | REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = 1,
> + .consumer_supplies = &touchbook_vsim_supply,
> +};
> +
> +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
> +static struct regulator_init_data touchbook_vdac = {
> + .constraints = {
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = 1,
> + .consumer_supplies = &touchbook_vdac_supply,
> +};
> +
> +/* VPLL2 for digital video outputs */
> +static struct regulator_init_data touchbook_vpll2 = {
> + .constraints = {
> + .name = "VDVI",
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = 1,
> + .consumer_supplies = &touchbook_vdvi_supply,
> +};
> +
> +static struct twl4030_usb_data touchbook_usb_data = {
> + .usb_mode = T2_USB_MODE_ULPI,
> +};
> +
> +static struct twl4030_codec_audio_data touchbook_audio_data = {
> + .audio_mclk = 26000000,
> +};
> +
> +static struct twl4030_codec_data touchbook_codec_data = {
> + .audio_mclk = 26000000,
> + .audio = &touchbook_audio_data,
> +};
> +
> +static struct twl4030_platform_data touchbook_twldata = {
> + .irq_base = TWL4030_IRQ_BASE,
> + .irq_end = TWL4030_IRQ_END,
> +
> + /* platform_data for children goes here */
> + .usb = &touchbook_usb_data,
> + .gpio = &touchbook_gpio_data,
> + .codec = &touchbook_codec_data,
> + .vmmc1 = &touchbook_vmmc1,
> + .vsim = &touchbook_vsim,
> + .vdac = &touchbook_vdac,
> + .vpll2 = &touchbook_vpll2,
> +};
> +
> +static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = {
> + {
> + I2C_BOARD_INFO("twl4030", 0x48),
> + .flags = I2C_CLIENT_WAKE,
> + .irq = INT_34XX_SYS_NIRQ,
> + .platform_data = &touchbook_twldata,
> + },
> +};
> +
> +static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
> + {
> + I2C_BOARD_INFO("bq27200", 0x55),
> + },
> +};
> +
> +static int __init omap3_touchbook_i2c_init(void)
> +{
> + /* Standard TouchBook bus */
> + omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo,
> + ARRAY_SIZE(touchbook_i2c_boardinfo));
> +
> + /* Additional TouchBook bus */
> + omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
> + ARRAY_SIZE(touchBook_i2c_boardinfo));
> +
> + return 0;
> +}
> +
> +static void __init omap3_ads7846_init(void)
> +{
> + if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) {
> + printk(KERN_ERR "Failed to request GPIO %d for "
> + "ads7846 pen down IRQ\n", OMAP3_TS_GPIO);
> + return;
> + }
> +
> + gpio_direction_input(OMAP3_TS_GPIO);
> + omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
> + omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
> +}
> +
> +static struct ads7846_platform_data ads7846_config = {
> + .x_min = 100,
> + .y_min = 265,
> + .x_max = 3950,
> + .y_max = 3750,
> + .x_plate_ohms = 40,
> + .pressure_max = 255,
> + .debounce_max = 10,
> + .debounce_tol = 5,
> + .debounce_rep = 1,
> + .gpio_pendown = OMAP3_TS_GPIO,
> + .keep_vref_on = 1,
> +};
> +
> +static struct omap2_mcspi_device_config ads7846_mcspi_config = {
> + .turbo_mode = 0,
> + .single_channel = 1, /* 0: slave, 1: master */
> +};
> +
> +static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata
> = {
> + {
> + .modalias = "ads7846",
> + .bus_num = 4,
> + .chip_select = 0,
> + .max_speed_hz = 1500000,
> + .controller_data = &ads7846_mcspi_config,
> + .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO),
> + .platform_data = &ads7846_config,
> + }
> +};
> +
> +static struct gpio_led gpio_leds[] = {
> + {
> + .name = "touchbook::usr0",
> + .default_trigger = "heartbeat",
> + .gpio = 150,
> + },
> + {
> + .name = "touchbook::usr1",
> + .default_trigger = "mmc0",
> + .gpio = 149,
> + },
> + {
> + .name = "touchbook::pmu_stat",
> + .gpio = -EINVAL, /* gets replaced */
> + .active_low = true,
> + },
> +};
> +
> +static struct gpio_led_platform_data gpio_led_info = {
> + .leds = gpio_leds,
> + .num_leds = ARRAY_SIZE(gpio_leds),
> +};
> +
> +static struct platform_device leds_gpio = {
> + .name = "leds-gpio",
> + .id = -1,
> + .dev = {
> + .platform_data = &gpio_led_info,
> + },
> +};
> +
> +static struct gpio_keys_button gpio_buttons[] = {
> + {
> + .code = BTN_EXTRA,
> + .gpio = 7,
> + .desc = "user",
> + .wakeup = 1,
> + },
> + {
> + .code = KEY_POWER,
> + .gpio = 183,
> + .desc = "power",
> + .wakeup = 1,
> + },
> +};
> +
> +static struct gpio_keys_platform_data gpio_key_info = {
> + .buttons = gpio_buttons,
> + .nbuttons = ARRAY_SIZE(gpio_buttons),
> +};
> +
> +static struct platform_device keys_gpio = {
> + .name = "gpio-keys",
> + .id = -1,
> + .dev = {
> + .platform_data = &gpio_key_info,
> + },
> +};
> +
> +static struct omap_board_config_kernel omap3_touchbook_config[]
> __initdata = {
> + { OMAP_TAG_LCD, &omap3_touchbook_lcd_config },
> +};
> +
> +static void __init omap3_touchbook_init_irq(void)
> +{
> + omap_board_config = omap3_touchbook_config;
> + omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
> + omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
> + mt46h32m32lf6_sdrc_params);
> + omap_init_irq();
> +#ifdef CONFIG_OMAP_32K_TIMER
> + omap2_gp_clockevent_set_gptimer(12);
> +#endif
> + omap_gpio_init();
> +}
> +
> +static struct platform_device *omap3_touchbook_devices[] __initdata = {
> + &omap3_touchbook_lcd_device,
> + &leds_gpio,
> + &keys_gpio,
> +};
> +
> +static void __init omap3touchbook_flash_init(void)
> +{
> + u8 cs = 0;
> + u8 nandcs = GPMC_CS_NUM + 1;
> +
> + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
> +
> + /* find out the chip-select on which NAND exists */
> + while (cs < GPMC_CS_NUM) {
> + u32 ret = 0;
> + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
> +
> + if ((ret & 0xC00) == 0x800) {
> + printk(KERN_INFO "Found NAND on CS%d\n", cs);
> + if (nandcs > GPMC_CS_NUM)
> + nandcs = cs;
> + }
> + cs++;
> + }
> +
> + if (nandcs > GPMC_CS_NUM) {
> + printk(KERN_INFO "NAND: Unable to find configuration "
> + "in GPMC\n ");
> + return;
> + }
> +
> + if (nandcs < GPMC_CS_NUM) {
> + omap3touchbook_nand_data.cs = nandcs;
> + omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *)
> + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
> + omap3touchbook_nand_data.gpmc_baseaddr =
> + (void *) (gpmc_base_add);
> +
> + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
> + if (platform_device_register(&omap3touchbook_nand_device) < 0)
> + printk(KERN_ERR "Unable to register NAND device\n");
> + }
> +}
> +
> +static void __init omap3_mma7455l_init(void)
> +{
> + int ret;
> +
> + ret = gpio_request(OMAP3_AC_GPIO, "mma7455l");
> + if (ret < 0) {
> + printk(KERN_ERR "Failed to request GPIO %d for mma7455l IRQ\n",
> + OMAP3_AC_GPIO);
> + return;
> + }
> +
> + gpio_direction_input(OMAP3_AC_GPIO);
> +}
> +
> +static struct mma7455l_platform_data mma7455l_config = {
> + .calibration_x = -4,
> + .calibration_y = 28,
> + .calibration_z = -28,
> +};
> +
> +static struct omap2_mcspi_device_config mma7455l_mcspi_config = {
> + .turbo_mode = 0,
> + .single_channel = 1, /* 0: slave, 1: master */
> +};
> +
> +static struct spi_board_info omap3_mma7455l_spi_board_info[] __initdata
> = {
> + {
> + .modalias = "mma7455l",
> + .bus_num = 3,
> + .chip_select = 0,
> + .max_speed_hz = 200000,
> + .irq = OMAP_GPIO_IRQ(OMAP3_AC_GPIO),
> + .controller_data = &mma7455l_mcspi_config,
> + .platform_data = &mma7455l_config,
> + }
> +};
> +
> +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
> +
> + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
> + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
> + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
> +
> + .phy_reset = true,
> + .reset_gpio_port[0] = -EINVAL,
> + .reset_gpio_port[1] = 147,
> + .reset_gpio_port[2] = -EINVAL
> +};
> +
> +static int touchbook_backlight_brightness = 50;
> +static struct omap_dm_timer *touchbook_backlight_pwm;
> +
> +static int touchbook_backlight_read(struct backlight_device *bd)
> +{
> + return touchbook_backlight_brightness;
> +}
> +
> +static int touchbook_backlight_update(struct backlight_device *bd)
> +{
> + int value = bd->props.brightness;
> + touchbook_backlight_brightness = value;
> +
> + /* Frequency calculation:
> + - For 200Hz PWM, you want to load -164 (=> -32768Hz / 200Hz).
> + - Minimum duty cycle for the backlight is 15%.
> + - You have (164*0.85) => ~140 levels of brightness.
> + */
> +
> + /* For maximum brightness, just stop the timer... */
> + if (value != bd->props.max_brightness) {
> + /* Load the appropriate value for 200Hz PWM */
> + u32 period = clk_get_rate(omap_dm_timer_get_fclk(
> + touchbook_backlight_pwm)) / 200;
> +
> + /* Minimum duty cycle is 15% */
> + u32 minimum = (period * 3) / 20;
> + u32 maximum = (period * 17) / 20;
> +
> + /* Work out match value */
> + u32 match = (maximum * value) / 100;
> +
> + /* Start... */
> + omap_dm_timer_set_load(touchbook_backlight_pwm,
> + 1, 0xFFFFFFFF - period - 1);
> + omap_dm_timer_set_match(touchbook_backlight_pwm,
> + 1, 0xFFFFFFFF - minimum - match);
> + omap_dm_timer_write_counter(touchbook_backlight_pwm, -1);
> + omap_dm_timer_start(touchbook_backlight_pwm);
> + } else
> + omap_dm_timer_stop(touchbook_backlight_pwm);
> +
> +
> + return 0;
> +}
> +
> +static struct backlight_ops touchbook_backlight_properties = {
> + .get_brightness = touchbook_backlight_read,
> + .update_status = touchbook_backlight_update,
> +};
> +
> +static void __init omap3_touchbook_backlight_init(void)
> +{
> + static struct backlight_device *bd;
> + bd = backlight_device_register("touchbook", NULL, NULL,
> + &touchbook_backlight_properties);
> +
> + if (bd) {
> + touchbook_backlight_pwm = omap_dm_timer_request_specific(
> + TB_BL_PWM_TIMER);
> + omap_dm_timer_enable(touchbook_backlight_pwm);
> + omap_dm_timer_set_source(touchbook_backlight_pwm,
> + OMAP_TIMER_SRC_SYS_CLK);
> + omap_dm_timer_set_pwm(touchbook_backlight_pwm,
> + 1, 1, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE);
> +
> + bd->props.max_brightness = 100;
> + bd->props.brightness = touchbook_backlight_brightness;
> + }
> +
> + touchbook_backlight_update(bd);
> +}
> +
> +static void omap3_touchbook_poweroff(void)
> +{
> + int r;
> +
> + r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset");
> + if (r < 0) {
> + printk(KERN_ERR "Unable to get kill power GPIO\n");
> + return;
> + }
> +
> + gpio_direction_output(TB_KILL_POWER_GPIO, 0);
> +}
> +
> +static void __init early_touchbook_revision(char **p)
> +{
> + if (!*p)
> + return;
> +
> + strict_strtoul(*p, 10, &touchbook_revision);
> +}
> +__early_param("tbr=", early_touchbook_revision);
> +
> +static void __init omap3_touchbook_init(void)
> +{
> + pm_power_off = omap3_touchbook_poweroff;
> +
> + omap3_touchbook_i2c_init();
> + platform_add_devices(omap3_touchbook_devices,
> + ARRAY_SIZE(omap3_touchbook_devices));
> + omap_serial_init();
> +
> + omap_cfg_reg(J25_34XX_GPIO170);
> + gpio_request(176, "DVI_nPD");
> + /* REVISIT leave DVI powered down until it's needed ... */
> + gpio_direction_output(176, true);
> +
> + /* Touchscreen and accelerometer */
> + spi_register_board_info(omap3_ads7846_spi_board_info,
> + ARRAY_SIZE(omap3_ads7846_spi_board_info));
> + spi_register_board_info(omap3_mma7455l_spi_board_info,
> + ARRAY_SIZE(omap3_mma7455l_spi_board_info));
> + omap3_ads7846_init();
> + omap3_mma7455l_init();
> +
> + omap3_touchbook_backlight_init();
> +
> + usb_musb_init();
> + usb_ehci_init(&ehci_pdata);
> + omap3touchbook_flash_init();
> +
> + /* Ensure SDRC pins are mux'd for self-refresh */
> + omap_cfg_reg(H16_34XX_SDRC_CKE0);
> + omap_cfg_reg(H17_34XX_SDRC_CKE1);
> +}
> +
> +static void __init omap3_touchbook_map_io(void)
> +{
> + omap2_set_globals_343x();
> + omap2_map_common_io();
> +}
> +
> +MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
> + /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
> + .phys_io = 0x48000000,
> + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
> + .boot_params = 0x80000100,
> + .map_io = omap3_touchbook_map_io,
> + .init_irq = omap3_touchbook_init_irq,
> + .init_machine = omap3_touchbook_init,
> + .timer = &omap_timer,
> +MACHINE_END
> --
> 1.6.0.4
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
