N810: problem with watchdog

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I'm trying to get latest linux-omap working with N810. I got an error
with watchdog(commit e7e7a613eded2732b68496f69ff8fc
34f16e1dd0) that I'm trying to solve the problem.

Any idea?

Thanks in advance,
Alecrim.

PS:
R&D flags : no-omap-wd, no-retu-wd, no-lifeguard-reset, serial-console .
Kernel output :
Timeout waiting for flashing commands
Loading kernel image info... done.
Loading kernel (1189 kB)... done in 60 ms (19596 kB/s)
Total bootup time 2763 ms
Uncompressing Linux..............................................................................
done, booting the kernel.
[    0.000000] Linux version 2.6.32-rc6-06432-ge7e7a61
(alecrim@alecrim) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) )
#10 Wed Nov 11 17:05:29 AMT 2009
[    0.000000] CPU: ARMv6-compatible processor [4107b362] revision 2
(ARMv6TEJ), cr=00c5387f
[    0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Nokia N810
[    0.000000] Ignoring unrecognised tag 0x414f4d50
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] BUG: mapping for 0x58000000 at 0xe0000000 overlaps vmalloc space
[    0.000000] BUG: mapping for 0x59000000 at 0xe1000000 overlaps vmalloc space
[    0.000000] BUG: mapping for 0x5a000000 at 0xe2000000 overlaps vmalloc space
[    0.000000] OMAP2420
[    0.000000]
[    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 32512
[    0.000000] Kernel command line: root=1f03 rootfstype=jffs2
console=ttyS2,115200n8
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 64MB 64MB = 128MB total
[    0.000000] Memory: 127316KB available (2068K code, 189K data, 104K
init, 0K highmem)
[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:368
[    0.000000] Clocking rate (Crystal/DPLL/MPU): 19.2/658/329 MHz
[    0.000000] GPMC revision 2.0
[    0.000000] IRQ: Found an INTC at 0xfa0fe000 (revision 2.0) with 96
interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP GPIO hardware version 1.8
[    0.000000] OMAP clockevent source: GPTIMER1 at 32000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Calibrating delay loop... 320.37 BogoMIPS (lpj=1253376)
[    0.000000] Mount-cache hash table entries: 512
[    0.000000] CPU: Testing write buffer coherency: ok
[    0.000000] NET: Registered protocol family 16
[    5.921752] OMAP DMA hardware revision 2.0
[    5.940643] bio: create slab <bio-0> at 0
[    5.945556] usbcore: registered new interface driver usbfs
[    5.946472] usbcore: registered new interface driver hub
[    5.947082] usbcore: registered new device driver usb
[    5.949523] Switching to clocksource 32k_counter
[    5.954376] musb_hdrc: version 6.0, tusb-omap-dma, peripheral, debug=0
[    5.955291] NET: Registered protocol family 2
[    5.955566] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    5.956024] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    5.956329] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    5.956542] TCP: Hash tables configured (established 4096 bind 4096)
[    5.956573] TCP reno registered
[    5.956817] NET: Registered protocol family 1
[    5.958831] NetWinder Floating Point Emulator V0.97 (double precision)
[    5.992065] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    5.994750] msgmni has been set to 248
[    5.994873] io scheduler noop registered
[    5.995849] io scheduler cfq registered (default)
[    6.035827] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    6.059661] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[    6.080871] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[    6.102111] serial8250.2: ttyS2 at MMIO 0x4806e000 (irq = 74) is a ST16654
[    6.420166] console [ttyS2] enabled
[    6.446960] brd: module loaded
[    6.450775] OneNAND driver initializing
[    6.455047] omap2-onenand omap2-onenand: initializing on CS0, phys
base 0x04000000, virtual base c8880000
[    6.464965] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
[    6.469787] OneNAND version = 0x0022
[    6.475006] Scanning device for bad blocks
[    6.489166] onenand_bbt_wait: ecc error = 0x2222, controller error 0x2440
[    6.496032] Bad eraseblock 183 at 0x016e0000
[    6.570098] onenand_bbt_wait: ecc error = 0x2222, controller error 0x2440
[    6.576965] Bad eraseblock 1461 at 0x0b6a0000
[    6.613372] Creating 5 MTD partitions on "omap2-onenand":
[    6.618865] 0x000000000000-0x000000020000 : "bootloader"
[    6.624938] 0x000000020000-0x000000080000 : "config"
[    6.630554] 0x000000080000-0x000000280000 : "kernel"
[    6.636260] 0x000000280000-0x000000680000 : "initfs"
[    6.642028] 0x000000680000-0x000010000000 : "rootfs"
[    6.650695] mice: PS/2 mouse device common for all mice
[    6.656219] TCP cubic registered
[    6.660308] VFP support v0.3: implementor 41 architecture 1 part 20
variant b rev 2
[    6.728607] Empty flash at 0x002384fc ends at 0x00238800
[    6.740478] VFS: Mounted root (jffs2 filesystem) on device 31:3.
[    6.746734] Freeing init memory: 104K
BusyBox v1.00 (2008.09.02-06:38+0000) multi-call binary

Usage: mknod [OPTIONS] NAME TYPE MAJOR MINOR

Create a special file (block, character, or pipe).

Options:
        -m      create the special file using the specified mode (default a=rw)

TYPEs include:
        b:      Make a block (buffered) device.
        c or u: Make a character (un-buffered) device.
        p:      Make a named pipe. MAJOR and MINOR are ignored for named pipes.

BusyBox v1.00 (2008.09.02-06:38+0000) multi-call binary

Usage: mknod [OPTIONS] NAME TYPE MAJOR MINOR

Create a special file (block, character, or pipe).

Options:
        -m      create the special file using the specified mode (default a=rw)

TYPEs include:
        b:      Make a block (buffered) device.
        c or u: Make a character (un-buffered) device.
        p:      Make a named pipe. MAJOR and MINOR are ignored for named pipes.

Enabling core dumps to /media/mmc1/core-dumps/...done.
Starting DSME... done.
dsme: reading bootreason from /proc/bootreason
dsme: No correct bootreason found, entering the malfunction state
dsme: bootreason read **
dsme: bootreason was other than mbus, let's wait for the battery type
Wait for DSME socket to appear
grep: /proc/component_version: No such file or directory
fopen: Bad file descriptor
cal_read_block(r&d_mode): size zero, block not found?
Kicker: error reading R&D mode flags, both watchdogs enabledreceived state:8
Kicker: Error initialising OMAP watchdogKicker: failed to init WDs,
exiting...DSME: process '/usr/sbin/kicker' with pid 328 exited with
return value: 1
DSME: process '/usr/sbin/kicker' exited
 and restarted with pid 338
cal_read_block(r&d_mode): size zero, block not found?
Kicker: error reading R&D mode flags, both watchdogs enabledKicker:
Error initialising OMAP watchdogKicker: failed to init WDs,
exiting...DSME: process '/usr/sbin/kicker' with pid 1
DSME: process '/usr/sbin/kicker' exited
 and restarted with pid 350
Entering state 'MALF'.
Houston, we have a problem, powering off...
cal_read_block(r&d_mode): size zero, block not found?
Kicker: error reading R&D mode flags, both watchdogs enabled
The system is going down NOW !!
Sending SIGTERM to all processes.
Sending SIGKILL to all processes.
[    9.813659] System halted.
grep: /proc/component_version: No such file or directory
Loading WLAN module...
[   10.018249] umac: version magic '2.6.21-omap1 mod_unload ARMv6 '
should be '2.6.32-rc6-06432-ge7e7a61 mod_unload ARMv6 '
insmod: cannot insert `/lib/modules/current/umac.ko': Invalid module
format (-1): Exec format error
[   10.062286] cx3110x: version magic '2.6.21-omap1 mod_unload ARMv6 '
should be '2.6.32-rc6-06432-ge7e7a61 mod_unload ARMv6 '
insmod: cannot insert `/lib/modules/current/cx3110x.ko': Invalid
module format (-1): Exec format error
Pushing the WLAN tuned values
cal_init: dsmesock_connect failedPushing default country...cal_init failed
[FAILED]
cal_init: dsmesock_connect failedPushing MAC address...cal_init failed
bad CAL (0,28), Using default Nokia MAC Couldn't open
/sys/devices/platform/wlan-omap/cal_mac_address
[FAILED]
cal_init: dsmesock_connect failedPushing IQ tuned values...cal_init failed
Got 0 bytes while expecting 108
[FAILED]
cal_init: dsmesock_connect failedPushing TX tuned values...cal_init failed
(default values)Couldn't open /sys/devices/platform/wlan-omap/cal_pa_curve_data
[FAILED]
Pushing TX limits...Couldn't open
/sys/devices/platform/wlan-omap/cal_output_limits
[FAILED]
Pushing RX tuned values...Using default values Couldn't open
/sys/devices/platform/wlan-omap/cal_rssi
[FAILED]
real    0m 1.62s
user    0m 0.00s
sys     0m 1.64s
dsmesock_connect: Connection refused
dsmesock_connect
Entering state 'MALF'.
Houston, we have a problem, powering off...

The system is going down NOW !!
Sending SIGTERM to all processes.
Sending SIGKILL to all processes.
[   13.895050] ------------[ cut here ]------------
[   13.899749] WARNING: at lib/kobject.c:595 kobject_put+0x30/0x5c()
[   13.905944] kobject:: is not initialized, yet kobject_put() is being called.
[   13.914886] Modules linked in:
[   13.918090] [<c0028930>] (unwind_backtrace+0x0/0xdc) from
[<c0046e3c>] (warn_slowpath_common+0x48/0x60)
[   13.927612] [<c0046e3c>] (warn_slowpath_common+0x48/0x60) from
[<c0046e8c>] (warn_slowpath_fmt+0x24/0x30)
[   13.937286] [<c0046e8c>] (warn_slowpath_fmt+0x24/0x30) from
[<c00fa034>] (kobject_put+0x30/0x5c)
[   13.946197] [<c00fa034>] (kobject_put+0x30/0x5c) from [<c0125e70>]
(device_shutdown+0x88/0x9c)
[   13.954956] [<c0125e70>] (device_shutdown+0x88/0x9c) from
[<c0054afc>] (kernel_halt+0xc/0x24)
[   13.963592] [<c0054afc>] (kernel_halt+0xc/0x24) from [<c0054c58>]
(sys_reboot+0xfc/0x1a8)
[   13.971862] [<c0054c58>] (sys_reboot+0xfc/0x1a8) from [<c0022e20>]
(ret_fast_syscall+0x0/0x2c)
[   13.980560] ---[ end trace 5961c93356cd0604 ]---
[   13.985229] ------------[ cut here ]------------
[   13.989898] WARNING: at lib/kobject.c:595 kobject_put+0x30/0x5c()
[   13.996063] kobject:: is not initialized, yet kobject_put() is being called.
[   14.005004] Modules linked in:
[   14.008148] [<c0028930>] (unwind_backtrace+0x0/0xdc) from
[<c0046e3c>] (warn_slowpath_common+0x48/0x60)
[   14.017669] [<c0046e3c>] (warn_slowpath_common+0x48/0x60) from
[<c0046e8c>] (warn_slowpath_fmt+0x24/0x30)
[   14.027343] [<c0046e8c>] (warn_slowpath_fmt+0x24/0x30) from
[<c00fa034>] (kobject_put+0x30/0x5c)
[   14.036254] [<c00fa034>] (kobject_put+0x30/0x5c) from [<c0125e78>]
(device_shutdown+0x90/0x9c)
[   14.044982] [<c0125e78>] (device_shutdown+0x90/0x9c) from
[<c0054afc>] (kernel_halt+0xc/0x24)
[   14.053619] [<c0054afc>] (kernel_halt+0xc/0x24) from [<c0054c58>]
(sys_reboot+0xfc/0x1a8)
[   14.061889] [<c0054c58>] (sys_reboot+0xfc/0x1a8) from [<c0022e20>]
(ret_fast_syscall+0x0/0x2c)
[   14.070587] ---[ end trace 5961c93356cd0605 ]---
[   14.075256] System halted.
mount: Mounting /tmp on /mnt/new_root/tmp failed: No such file or directory
cat: can't open '/etc/osso_software_version': No such file or directory
Starting init
INIT: version 2.86 booting
Please wait: booting...
mount: mounting sysfs on /sys failed: Device or resource busy
Starting udev
[   15.750457] JFFS2 notice: (410) check_node_data: wrong data CRC in
data node at 0x0d213f24: read 0xa5cd5de3, calculated 0x88cfb26e.
Populating dev cache
Root filesystem already rw, not remounting
ALSA: Restoring mixer settings...
Setting up IP spoofing protection: rp_filter.
/usr/sbin/alsactl: load_state:1608: No soundcards found...
hwclock: can't open '/dev/misc/rtc': No such file or directory
Wed Nov 11 12:56:00 UTC 2009
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting Hardware abstraction layer hald
run-parts: /etc/dbus-1/event.d/20hal exited with code 1
Starting syslogd/klogd: done
Starting Xserver
Starting Bluetooth subsystem: bluetoothd.
fbset: can't open '/dev/fb0': No such file or directory
Starting Network connection manager daemon: NetworkManager.
--
--
Francisco Keppler Silva Alecrim
http://franciscoalecrim.com/
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux