On Tue, Nov 10, 2009 at 4:36 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > * Cory Maccarrone <darkstar6262@xxxxxxxxx> [091003 15:09]: >> The omap730 and omap850 both use a different clock for the "fck" >> clock of the MMC interface than other omap processors based on the >> SOFT_REQ_REG, pin 12. The "ick" clock is the same as that used >> by other omap processors. >> >> * Added the missing clock definition as mmc3_ck to clock.h >> * Added the clock definition to omap_clks in clock.c >> * Added CK_7XX to the mmci-omap.0 "ick" clock already in clock.c >> >> With this change, it is now possible to initialize and use MMC >> cards with omap730 and omap850 devices. > > Pushing all the 7xx mmc platform init code as a single patch to > for-next today. Can you please check? > > The drivers/mmc/host/omap.c patch you need to get merged via > linux-mmc@xxxxxxxxxxxxxxx list :) > > Tony > MMC code is good. With the additions of the omap.c patch and board support, MMC works beautifully. I'll go ahead and repost that patch to linux-mmc, thanks for the tip. Cory -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
