The settings for ON voltage level in the registers PRM_VC_CMD_VAL_0,1 was not updated based on OPP table. Once the MPU resumes from OFF mode (during idle OR suspend) the VDD1 voltage always returns to 1.2V. This patch programs the value based on current OPP. Signed-off-by: Sanjeev Premi <premi@xxxxxx> --- arch/arm/mach-omap2/smartreflex.c | 19 ++++++++++++++++++- 1 files changed, 18 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index be3a1da..4cbbd6f 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -313,6 +313,15 @@ static void sr_configure_vp(int srid) PRM_VP1_CONFIG_TIMEOUTEN | vsel << OMAP3430_INITVOLTAGE_SHIFT; + /* + * Update the 'ON' voltage levels based on the VSEL. + * (See spruf8c.pdf sec 1.5.3.1) + */ + prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK, + (vsel << OMAP3430_VC_CMD_ON_SHIFT), + OMAP3430_GR_MOD, + OMAP3_PRM_VC_CMD_VAL_0_OFFSET); + prm_write_mod_reg(vpconfig, OMAP3430_GR_MOD, OMAP3_PRM_VP1_CONFIG_OFFSET); prm_write_mod_reg(PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN | @@ -354,6 +363,15 @@ static void sr_configure_vp(int srid) else vsel = l3_opps[target_opp_no].vsel; + /* + * Update the 'ON' voltage levels based on the VSEL. + * (See spruf8c.pdf sec 1.5.3.1) + */ + prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK, + (vsel << OMAP3430_VC_CMD_ON_SHIFT), + OMAP3430_GR_MOD, + OMAP3_PRM_VC_CMD_VAL_1_OFFSET); + vpconfig = PRM_VP2_CONFIG_ERROROFFSET | PRM_VP2_CONFIG_ERRORGAIN | PRM_VP2_CONFIG_TIMEOUTEN | @@ -391,7 +409,6 @@ static void sr_configure_vp(int srid) /* Clear force bit */ prm_clear_mod_reg_bits(OMAP3430_FORCEUPDATE, OMAP3430_GR_MOD, OMAP3_PRM_VP2_CONFIG_OFFSET); - } } -- 1.6.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
