This change implements USB client side support into the HTC Herald board configuration. It uses a similar, but updated algorithm to initialize the USB as is used in the linwizard project. Signed-off-by: Cory Maccarrone <darkstar6262@xxxxxxxxx> --- arch/arm/mach-omap1/board-htcherald.c | 70 +++++++++++++++++++++++++++++++++ 1 files changed, 70 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 5f28a5c..8949570 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -39,6 +39,7 @@ #include <plat/common.h> #include <plat/board.h> #include <plat/keypad.h> +#include <plat/usb.h> #include <mach/irqs.h> @@ -140,6 +141,15 @@ static struct platform_device kp_device = { .resource = kp_resources, }; +/* USB Device */ +static struct omap_usb_config htcherald_usb_config __initdata = { + .otg = 0, + .register_host = 0, + .register_dev = 1, + .hmc_mode = 4, + .pins[0] = 2, +}; + /* LCD Device resources */ static struct platform_device lcd_device = { .name = "lcd_htcherald", @@ -214,6 +224,63 @@ static void __init htcherald_disable_watchdog(void) } } +#define HTCHERALD_GPIO_USB_EN1 33 +#define HTCHERALD_GPIO_USB_EN2 73 +#define HTCHERALD_GPIO_USB_DM 35 +#define HTCHERALD_GPIO_USB_DP 36 + +static void __init htcherald_usb_enable(void) +{ + unsigned int tries = 20; + unsigned int value = 0; + + /* Request the GPIOs we need to control here */ + if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0) { + printk(KERN_WARNING "Unable to request HTCHERALD_GPIO_USB_EN1, USB will be unavailable\n"); + goto done; + } + + if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0) { + printk(KERN_WARNING "Unable to request HTCHERALD_GPIO_USB_EN2, USB will be unavailable\n"); + goto err1; + } + + if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0) { + printk(KERN_WARNING "Unable to request HTCHERALD_GPIO_USB_DM, USB will be unavailable\n"); + goto err2; + } + + if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0) { + printk(KERN_WARNING "Unable to request HTCHERALD_GPIO_USB_DP, USB will be unavailable\n"); + goto err3; + } + + /* force USB_EN GPIO to 0 */ + do { + gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0); /* output low */ + } while((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 && --tries); + + if (value == 1) { + printk(KERN_WARNING "unable to reset USB_EN GPIO after 20 tries.\n"); + printk(KERN_WARNING "I will try to continue anyway: USB may not be available.\n"); + } + + gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */ + gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */ + gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */ + + goto done; + +err3: + gpio_free(HTCHERALD_GPIO_USB_DM); +err2: + gpio_free(HTCHERALD_GPIO_USB_EN2); +err1: + gpio_free(HTCHERALD_GPIO_USB_EN1); +done: + printk(KERN_INFO "USB setup complete.\n"); +} + static void __init htcherald_init(void) { printk(KERN_INFO "HTC Herald init.\n"); @@ -225,6 +292,9 @@ static void __init htcherald_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); + + htcherald_usb_enable(); + omap_usb_init(&htcherald_usb_config); } static void __init htcherald_init_irq(void) -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html