> -----Original Message----- > From: linux-omap-owner@xxxxxxxxxxxxxxx [mailto:linux-omap- > owner@xxxxxxxxxxxxxxx] On Behalf Of Premi, Sanjeev > Sent: Friday, November 20, 2009 9:47 AM > To: linux-omap@xxxxxxxxxxxxxxx > Subject: VDD1 voltage after resume from idle > > Hi, > > I am facing a strange problem on OMAP3EVM after resuming from idle. > When using OPP5, the VDD1 voltage ramps to 1.35V. > > However, when i go thru the idle/wakeup cycle, the voltage never > ramps back to 1.35V but stays at 1.20V. > > I don't notice many changes in smartreflex.c since 2.6.31-rc7 but > this problem is not observed there. Actually, here the voltage > did not drop during suspend at all. > > While I continue to debug, any suggestions? Look for retention voltage setup (they should be OPP dependent).. this was one of my plans of cleanups anyways.. > > Best regards, > Sanjeev Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
