Linux IIO Development

• Thread Index

• [PATCH 04/10] dt-bindings: mmc: Add compatible for Mediatek MT8195
  • From: Seiya Wang <seiya.wang@xxxxxxxxxxxx>
• [PATCH 02/10] dt-bindings: serial: Add compatible for Mediatek MT8195
  • From: Seiya Wang <seiya.wang@xxxxxxxxxxxx>
• [PATCH 03/10] dt-bindings: watchdog: Add compatible for Mediatek MT8195
  • From: Seiya Wang <seiya.wang@xxxxxxxxxxxx>
• [PATCH 01/10] dt-bindings: timer: Add compatible for Mediatek MT8195
  • From: Seiya Wang <seiya.wang@xxxxxxxxxxxx>
• [PATCH 00/10] Add basic node support for Mediatek MT8195 SoC
  • From: Seiya Wang <seiya.wang@xxxxxxxxxxxx>
• Re: [PATCH 13/24] staging:iio:cdc:ad7150: More consistent register and field naming
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v4] iio: cros: unify hw fifo attributes without API changes
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings:iio:adc: add documentation for TI TSC2046 controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PULL] IIO and counter fixes for 5.12, set 1
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• [PATCH] staging: iio: ad9832: kernel-doc fixes
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• Re: [PATCH] iio:cros_ec_sensors: Fix a wrong function name in kernel doc.
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [RFC PATCH 2/7] iio:ABI docs: Avoid repitition of triggerX/sampling_frequency
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: IIO advise + help
  • From: Michel Arruat <michel.arruat@xxxxxxx>
• Re: [PATCH 6/8] iio: adc: adi-axi-adc: Drop false marking for kernel-doc
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 1/8] iio: pressure: zpa2326: kernel-doc fixes
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 7/8] iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 3/8] iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 8/8] iio: buffer: kfifo_buf: kernel-doc, typo in function name.
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2] iio:dac:max517.c: Use devm_iio_device_register()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: temperature: tmp007: use device-managed functions in probe
  • From: Manivannan Sadhasivam <manivannanece23@xxxxxxxxx>
• Re: [PATCH v2 16/29] dt-bindings:iio:dac:ti,dac082s085 yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 16/29] dt-bindings:iio:dac:ti,dac082s085 yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• [PATCH v2 21/24] iio:Documentation:ABI Add missing elements as used by the adi,ad7150
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 23/24] dt-bindings:iio:cdc:adi,ad7150 binding doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 24/24] iio:cdc:ad7150: Move driver out of staging.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 20/24] staging:iio:cdc:ad7150: Add of_match_table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 22/24] staging:iio:cdc:ad7150: Add copyright notice given substantial changes.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 18/24] staging:iio:cdc:ad7150: Add scale and offset to info_mask_shared_by_type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 19/24] staging:iio:cdc:ad7150: Really basic regulator support.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 15/24] staging:iio:cdc:ad7150: Tidy up local variable positioning.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 16/24] staging:iio:cdc:ad7150: Drop unnecessary block comments.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 17/24] staging:iio:cdc:ad7150: Shift the _raw readings by 4 bits.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 12/24] staging:iio:cdc:ad7150: Rework interrupt handling.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 13/24] staging:iio:cdc:ad7150: More consistent register and field naming
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 14/24] staging:iio:cdc:ad7150: Reorganize headers.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 11/24] staging:iio:cdc:ad7150: Change timeout units to seconds and use core support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 10/24] iio:event: Add timeout event info type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 09/24] staging:iio:cdc:ad7150: Add sampling_frequency support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 07/24] staging:iio:cdc:ad7150: Simplify event handling by only using rising direction.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 08/24] staging:iio:cdc:ad7150: Drop noisy print in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 05/24] staging:iio:cdc:ad7150: Drop platform data support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 06/24] staging:iio:cdc:ad7150: Handle variation in chan_spec across device and irq present or not
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 03/24] staging:iio:cdc:ad7150: Refactor event parameter update
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 02/24] staging:iio:cdc:ad7150: Remove magnitude adaptive events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 04/24] staging:iio:cdc:ad7150: Timeout register covers both directions so both need updating
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 00/24] staging:iio:cdc:ad7150: cleanup / fixup / graduate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 01/24] staging:iio:cdc:ad7150: use swapped reads for i2c rather than open coding.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio:dac:max517.c: Use devm_iio_device_register()
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• Re: [PATCH 15/24] staging:iio:cdc:ad7150: Tidy up local variable positioning.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/24] staging:iio:cdc:ad7150: More consistent register and field naming
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] iio: kernel-doc fixups
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 6/9] iio/drivers/hid-sensor: Use HZ macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/9] iio/drivers/as73211: Use HZ macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 0/2] add support for GPIO or IRQ based event counter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• iio: TODO Clean up W=1 warnings in staging drivers.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/8] iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/8] iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 6/8] iio: adc: adi-axi-adc: Drop false marking for kernel-doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 8/8] iio: buffer: kfifo_buf: kernel-doc, typo in function name.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 5/8] iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/8] iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/8] iio: adc: ti-adc084s021: kernel-doc fixes, missing function names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 4/8] iio: dac: ad5504: fix wrong part number in kernel-doc structure name.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 0/8] iio: kernel-doc fixups
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/8] iio: pressure: zpa2326: kernel-doc fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] IIO and counter fixes for 5.12, set 1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:dac:max517: Use devm_iio_device_register()
  • From: Mugilraj D <dmugil2000@xxxxxxxxx>
• Re: [PATCH] iio:dac:max517: Use devm_iio_device_register()
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH] iio:dac:max517: Use devm_iio_device_register()
  • From: Mugilraj Dhavachelvan <dmugil2000@xxxxxxxxx>
• Re: [Linux-stm32] [PATCH v9 22/33] counter: Internalize sysfs interface code
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [Linux-stm32] [PATCH v9 22/33] counter: Internalize sysfs interface code
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: GSoC IIO project: Mugil
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: GSoC IIO project: Mugil
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5] Added AMS tsl2591 driver implementation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad9834: convert to device-managed functions in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: temperature: tmp007: use device-managed functions in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: GSoC IIO project: Mugil
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2] iio: buffer: fix use-after-free for attached_buffers array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v4] hwmon: (ntc_thermistor): try reading processed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/8] iio: Set default trigger device parent
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/8] iio: set default trig->dev.parent
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10] iio: hrtimer: Allow sub Hz granularity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/1] iio: adc: ad7124: allow more than 8 channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: cros: unify hw fifo attributes without API changes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 0/2] Add support for ST magnetometer IIS2MDC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings:iio:adc: add generic settling-time-us and average-samples channel properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: light: gp2ap002: Drop unneeded explicit casting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: imu: fxos8700: Drop unneeded explicit castings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: imu: st_lsm6dsx: Drop unneeded explicit castings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: chemical: bmp680: Drop unneeded explicit castings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] iio: proximity: Add a ChromeOS EC MKBP proximity driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio:cros_ec_sensors: Fix a wrong function name in kernel doc.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: IIO advise + help
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: IIO advise + help
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v6 3/3] iio: proximity: Add a ChromeOS EC MKBP proximity driver
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH 2/7] iio:ABI docs: Avoid repitition of triggerX/sampling_frequency
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• IIO advise + help
  • From: Michel Arruat <michel.arruat@xxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v1 1/1] iio: light: gp2ap002: Drop unneeded explicit casting
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: imu: st_lsm6dsx: Drop unneeded explicit castings
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: imu: fxos8700: Drop unneeded explicit castings
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] iio: chemical: bmp680: Drop unneeded explicit castings
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 0/3] mainline ti tsc2046 adc driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings:iio:adc: add generic settling-time-us and average-samples channel properties
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings:iio:adc: add documentation for TI TSC2046 controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2] iio: cros: unify hw fifo attributes without API changes
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2] iio: cros: unify hw fifo attributes without API changes
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: Remove kernel-doc keyword in file header comment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: GSoC IIO project: Mugil
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: GSoC IIO project: Mugil
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: GSoC IIO project: Mugil
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Re: [PATCH v5 1/1] iio: adc: ad7124: allow more than 8 channels
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 1/1] iio: adc: ad7124: allow more than 8 channels
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Peter Hilber <peter.hilber@xxxxxxxxxxxxxxx>
• [PATCH] iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH v5 1/1] iio: adc: ad7124: allow more than 8 channels
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH v5 0/1] iio: adc: ad7124: allow more than 8 channels
  • From: <alexandru.tachici@xxxxxxxxxx>
• Re: GSoC IIO project: Mugil
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: Contribution to linux-iio for GSOC 2021
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2] iio: cros: unify hw fifo attributes without API changes
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• RE: [PATCH 2/2] iio:magnetometer: Support for ST magnetic sensors
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• GSoC IIO project: Mugil
  • From: Mugil Raj <dmugil2000@xxxxxxxxx>
• [PATCH V2 0/2] Add support for ST magnetometer IIS2MDC
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 2/2] iio:magnetometer: Add Support for ST IIS2MDC
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH V2 1/2] dt-bindings: iio: st,st-sensors add IIS2MDC.
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4] iio: cros: unify hw fifo attributes without API changes
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: cros: unify hw fifo attributes without API changes
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3] iio: cros: unify hw fifo attributes without API changes
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: Contribution to linux-iio for GSOC 2021
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: Contribution to linux-iio for GSOC 2021
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Contribution to linux-iio for GSOC 2021
  • From: Utkarsh Verma <utkarshverma294@xxxxxxxxx>
• Re: shared access to gpio pin
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• shared access to gpio pin
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• Re: [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Peter Hilber <peter.hilber@xxxxxxxxxxxxxxx>
• [PATCH] staging: iio: ad9834: convert to device-managed functions in probe
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• [PATCH] iio: temperature: tmp007: use device-managed functions in probe
  • From: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
• Re: [PATCH v4 1/8] iio: set default trig->dev.parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• RE: [PATCH v4 3/8] iio: adis_trigger: Remove code to set trigger parent
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v2] iio: cros: unify hw fifo attributes without API changes
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v2] iio: cros: unify hw fifo attributes without API changes
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] HID: intel_ish-hid: HBM: Use connected standby state bit during suspend/resume
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• [PATCH] iio: Remove kernel-doc keyword in file header comment
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v7 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• [PATCH v7 0/1] Adding support for IIO SCMI based sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH v4 6/8] iio: chemical: atlas: Remove code to set trigger parent
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v4 5/8] iio: lmp91000: Remove code to set trigger parent
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v4 7/8] iio: as3935: Remove code to set trigger parent
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v10] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 3/8] iio: adis_trigger: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 1/8] iio: set default trig->dev.parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 8/8] iio: xilinx-xadc: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 7/8] iio: as3935: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 6/8] iio: chemical: atlas: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 0/8] iio: Set default trigger device parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 4/8] iio: gp2ap020a00f: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 1/8] iio: set default trig->dev.parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 2/8] iio: fix devm_iio_trigger_alloc with parent.cocci
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 3/8] iio: adis_trigger: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 5/8] iio: lmp91000: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 2/2 v4] hwmon: (ntc_thermistor): try reading processed
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] HID: intel_ish-hid: HBM: Use connected standby state bit during suspend/resume
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v9 33/33] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 32/33] counter: 104-quad-8: Replace mutex with spinlock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 31/33] counter: Implement events_queue_size sysfs attribute
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 29/33] counter: Implement signalZ_action_component_id sysfs attribute
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 30/33] counter: Implement *_component_id sysfs attributes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 28/33] tools/counter: Create Counter tools
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 27/33] docs: counter: Document character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 26/33] counter: Add character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 24/33] docs: counter: Update to reflect sysfs internalization
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 25/33] counter: Move counter enums to uapi header
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 23/33] counter: Update counter.h comments to reflect sysfs internalization
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 21/33] counter: Rename counter_count_function to counter_function
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 19/33] counter: Standardize to ERANGE for limit exceeded errors
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 20/33] counter: Rename counter_signal_value to counter_signal_level
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 18/33] counter: Return error code on invalid modes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 17/33] counter: stm32-timer-cnt: Add const qualifier for actions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 16/33] counter: stm32-lptimer-cnt: Add const qualifier for actions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v9 15/33] counter: microchip-tcb-capture: Add const qualifier for actions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 13/33] counter: ftm-quaddec: Add const qualifier for actions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 14/33] counter: interrupt-cnt: Add const qualifier for actions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 12/33] counter: 104-quad-8: Add const qualifier for actions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 11/33] counter: stm32-timer-cnt: Add const qualifier for functions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 10/33] counter: stm32-lptimer-cnt: Add const qualifier for functions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 09/33] counter: microchip-tcb-capture: Add const qualifier for functions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 08/33] counter: interrupt-cnt: Add const qualifier for functions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 05/33] counter: 104-quad-8: Annotate hardware config module parameter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 06/33] counter: 104-quad-8: Add const qualifiers for quad8_preset_register_set
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 07/33] counter: 104-quad-8: Add const qualifier for functions_list array
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 04/33] counter: 104-quad-8: Return error when invalid mode during ceiling_write
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 03/33] counter: 104-quad-8: Remove pointless comment
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 02/33] docs: counter: Fix spelling
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 00/33] Introduce the Counter character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v9 01/33] docs: counter: Consolidate Counter sysfs attributes documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] iio:magnetometer: Support for ST magnetic sensors
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: invensense mpu9250 ak8963 and devicetree
  • From: Philippe De Muyter <phdm@xxxxxxx>
• Re: invensense mpu9250 ak8963 and devicetree
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: invensense mpu9250 ak8963 and devicetree
  • From: Philippe De Muyter <phdm@xxxxxxx>
• Re: [PATCH v3 0/8] iio: Set default trigger device parent
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 3/8] iio: adis_trigger: Remove code to set trigger parent
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/8] iio: set default trig->dev.parent
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• RE: [PATCH 2/2] iio:magnetometer: Support for ST magnetic sensors
  • From: LI Qingwu <qing-wu.li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: cros: unify hw fifo attributes without API changes
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] HID: intel_ish-hid: HBM: Use connected standby state bit during suspend/resume
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• [PATCH v3 3/8] iio: adis_trigger: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 8/8] iio: xilinx-xadc: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 2/8] iio: fix devm_iio_trigger_alloc with parent.cocci
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 7/8] iio: as3935: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 6/8] iio: chemical: atlas: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 4/8] iio: gp2ap020a00f: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 1/8] iio: set default trig->dev.parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 5/8] iio: lmp91000: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 0/8] iio: Set default trigger device parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5] Added AMS tsl2591 driver implementation
  • From: Joe Sandom <joe.g.sandom@xxxxxxxxx>
• Re: [PATCH v2 0/8] iio: Set default trigger device parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [RESEND][PATCH v4 1/2] Added AMS tsl2591 driver implementation
  • From: Joe Sandom <joe.g.sandom@xxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings:iio:adc: add documentation for TI TSC2046 controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: st,st-sensors.yaml New iis2mdc bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: at91-sama5d2: add support for sama7g5 device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: adc: at91-sama5d2: add compatible for sama7g5-adc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: counter: add interrupt-counter binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: invensense mpu9250 ak8963 and devicetree
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2 v4] hwmon: (ntc_thermistor): try reading processed
  • From: Chris Lesiak <chris.lesiak@xxxxxxxxx>
• Re: [PATCH] HID: intel_ish-hid: HBM: Use connected standby state bit during suspend/resume
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: at91-sama5d2: initialize hardware after clock is started
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: at91-sama5d2: add support for sama7g5 device
  • From: <Eugen.Hristev@xxxxxxxxxxxxx>
• RE: [PATCH v3 0/6] iio: Add output buffer support
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: invensense mpu9250 ak8963 and devicetree
  • From: Philippe De Muyter <phdm@xxxxxxx>
• RE: [PATCH v3 0/6] iio: Add output buffer support
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH v3 0/6] iio: Add output buffer support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] HID: intel_ish-hid: HBM: Use connected standby state bit during suspend/resume
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• RE: [PATCH v3 0/6] iio: Add output buffer support
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• [PATCH 2/2 v4] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v4] iio: Provide iio_read_channel_processed_scale() API
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: cros: unify hw fifo attributes without API changes
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2] iio: buffer: fix use-after-free for attached_buffers array
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• [PATCH] iio: cros: unify hw fifo attributes without API changes
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v2] iio: buffer: fix use-after-free for attached_buffers array
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 1/2] iio: cros_ec: do an early exit if not physical_device case
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: buffer: fix use-after-free for attached_buffers array
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: buffer: fix use-after-free for attached_buffers array
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: adc: axp20x_adc: fix charging current reporting on AXP22x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] hwmon: (ntc_thermistor): try reading processed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: buffer: fix use-after-free for attached_buffers array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: kfifo: mask flags without zero-check in devm_iio_kfifo_buffer_setup()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9] iio: hrtimer: Allow sub Hz granularity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: remove mention of defunct list
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 2/7] iio:ABI docs: Avoid repitition of triggerX/sampling_frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: cros_ec: do an early exit if not physical_device case
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: event_monitor: Enable events before monitoring
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: samsung,exynos-adc: add common clock properties
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC PATCH 2/7] iio:ABI docs: Avoid repitition of triggerX/sampling_frequency
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] hwmon: (ntc_thermistor): try reading processed
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH] iio: adc: axp20x_adc: fix charging current reporting on AXP22x
  • From: Evgeny Boger <boger@xxxxxxxxxxxxxx>
• [PATCH v3] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: event_monitor: Enable events before monitoring
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RESEND][PATCH v4 2/2] Added AMS tsl2591 device tree binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: mma8452: fix indentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/6] iio: Add output buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: adc: at91-sama5d2: add support for sama7g5 device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: at91-sama5d2: initialize hardware after clock is started
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Fix error handling in vadc_do_conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/1] iio: adc: ad7124: allow more than 8 channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: hid-sensor-temperature: Fix issues of timestamp channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: convert to regmap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: buffer: fix use-after-free for attached_buffers array
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: fix ceiling write max value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio:magnetometer: Support for ST magnetic sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: kfifo: mask flags without zero-check in devm_iio_kfifo_buffer_setup()
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: event_monitor: Enable events before monitoring
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:adc: Add RZ/N1D ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/4] IIO: acpi-als: Get rid of ACPICA message printing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 4/4] hwmon: acpi_power_meter: Get rid of ACPICA message printing
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: counter: add event-counter binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: samsung,exynos-adc: add common clock properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v1 0/4] ACPI: New helper for warning messages and replacing ACPI_EXCEPTION()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 1/4] ACPI: processor: perflib: Eliminate redundant status check
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 3/4] IIO: acpi-als: Get rid of ACPICA message printing
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 2/4] ACPI: utils: Introduce acpi_evaluation_failure_warn()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 4/4] hwmon: acpi_power_meter: Get rid of ACPICA message printing
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v1 2/2] iio: adc: add ADC driver for the TI TSC2046 controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings:iio:adc: add documentation for TI TSC2046 controller
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 0/2] mainline ti tsc2046 adc driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] iio:adc: Add RZ/N1D ADC driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH] iio:adc: Add RZ/N1D ADC driver
  • From: Milan Stevanovic <milan.o.stevanovic@xxxxxxxxx>
• RE: [PATCH v3 0/6] iio: Add output buffer support
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• [PATCH 2/2] iio:magnetometer: Support for ST magnetic sensors
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: st,st-sensors.yaml New iis2mdc bindings
  • From: LI Qingwu <Qing-wu.Li@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: event_monitor: Enable events before monitoring
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: event_monitor: Enable events before monitoring
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• [PATCH] iio: event_monitor: Enable events before monitoring
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: invensense mpu9250 ak8963 and devicetree
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: invensense mpu9250 ak8963 and devicetree
  • From: Philippe De Muyter <phdm@xxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: fix ceiling write max value
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• invensense mpu9250 ak8963 and devicetree
  • From: Philippe De Muyter <phdm@xxxxxxx>
• [PATCH] iio: accel: mma8452: convert to regmap
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 3/4] iio: hid-sensor-temperature: Fix issues of timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 4/4] iio: hid-sensor-temperature: Get sample timestamp from sensor hub
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 2/4] iio: hid-sensor-humidity: Get sample timestamp from sensor hub
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 1/4] iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 0/4] Fix humidity and temperature timestamp channel issues
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH] HID: intel_ish-hid: HBM: Use connected standby state bit during suspend/resume
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: fix ceiling write max value
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: fix ceiling write max value
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] counter: stm32-timer-cnt: fix ceiling write max value
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: fix ceiling write max value
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/2] iio: cros_ec: do an early exit if not physical_device case
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v8 2/2] counter: add IRQ or GPIO based counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: counter: add interrupt-counter binding
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 2/5] iio: hid-sensor-als: Support change sensitivity in illuminance too.
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v4 1/1] iio: adc: ad7124: allow more than 8 channels
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH v4 0/1] iio: adc: ad7124: allow more than 8 channels
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH 3/4] iio: adc: at91-sama5d2: remove unused definition
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 4/4] iio: adc: at91-sama5d2: add support for sama7g5 device
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio: adc: at91-sama5d2: add compatible for sama7g5-adc
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 2/4] iio: adc: at91-sama5d2: initialize hardware after clock is started
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 0/4] iio: adc: at91-sama5d2: add support for sama7g5
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] HID: core: Export some report item parsing functions.
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH 3/5] HID: core: Export some report item parsing functions.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 4/5] HID: apple-ibridge: Add Apple iBridge HID driver for T1 chip.
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RESEND][PATCH v4 1/2] Added AMS tsl2591 driver implementation
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] iio: magnetometer: yas530: Fix return value on errorpath
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: adc: Fix error handling in vadc_do_conversion
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• [PATCH v8 1/2] dt-bindings: counter: add interrupt-counter binding
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v8 2/2] counter: add IRQ or GPIO based counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v8 0/2] add support for GPIO or IRQ based event counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• [PATCH v2] iio: accel: mma8452: fix indentation
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 4/5] HID: apple-ibridge: Add Apple iBridge HID driver for T1 chip.
  • From: "Life is hard, and then you die" <ronald@xxxxxxxxxxxxx>
• Re: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v6 19/24] iio: buffer: introduce support for attaching more IIO buffers
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v6 02/24] iio: kfifo: add devm_iio_kfifo_buffer_setup() helper
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 4/5] HID: apple-ibridge: Add Apple iBridge HID driver for T1 chip.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: hid-sensor-als: Support change sensitivity in illuminance too.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 0/5] Touch Bar and ALS support for MacBook Pro's
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6 19/24] iio: buffer: introduce support for attaching more IIO buffers
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6 02/24] iio: kfifo: add devm_iio_kfifo_buffer_setup() helper
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 5/5] HID: apple-touchbar - Add driver for the Touch Bar on MacBook Pro's.
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 5/5] HID: apple-touchbar - Add driver for the Touch Bar on MacBook Pro's.
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 5/5] HID: apple-touchbar - Add driver for the Touch Bar on MacBook Pro's.
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v8 20/22] counter: Implement events_queue_size sysfs attribute
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 4/5] HID: apple-ibridge: Add Apple iBridge HID driver for T1 chip.
  • From: Ronald Tschalär <ronald@xxxxxxxxxxxxx>
• [PATCH 1/5] HID: Recognize sensors with application collections too.
  • From: Ronald Tschalär <ronald@xxxxxxxxxxxxx>
• [PATCH 3/5] HID: core: Export some report item parsing functions.
  • From: Ronald Tschalär <ronald@xxxxxxxxxxxxx>
• [PATCH 2/5] iio: hid-sensor-als: Support change sensitivity in illuminance too.
  • From: Ronald Tschalär <ronald@xxxxxxxxxxxxx>
• [PATCH 0/5] Touch Bar and ALS support for MacBook Pro's
  • From: Ronald Tschalär <ronald@xxxxxxxxxxxxx>
• [PATCH 5/5] HID: apple-touchbar - Add driver for the Touch Bar on MacBook Pro's.
  • From: Ronald Tschalär <ronald@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/6] iio: core: Add mmap interface infrastructure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: core: use kstrdup_const/kfree_const for buffer attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/1] iio: adc: ad7124: allow more than 8 channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND][PATCH v4 1/2] Added AMS tsl2591 driver implementation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: proximity: vcnl3020: add proximity rate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: fix indentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: ad5686: Add PWM as a trigger source
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 20/22] counter: Implement events_queue_size sysfs attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 19/22] counter: Implement extension*_name sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 20/22] counter: Implement events_queue_size sysfs attribute
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 20/22] counter: Implement events_queue_size sysfs attribute
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v2] counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH v7 2/2] counter: add IRQ or GPIO based counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v7 2/2] counter: add IRQ or GPIO based counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] iio: accel: mma8452: fix indentation
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v7 2/2] counter: add IRQ or GPIO based counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v9] iio: hrtimer: Allow sub Hz granularity
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: counter: add interrupt-counter binding
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v7 0/2] add support for GPIO or IRQ based evemt counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v7 2/2] counter: add IRQ or GPIO based counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v9] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2] counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 18/22] docs: counter: Document character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 18/22] docs: counter: Document character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 20/22] counter: Implement events_queue_size sysfs attribute
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 19/22] counter: Implement extension*_name sysfs attributes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2] iio: proximity: vcnl3020: add proximity rate
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v2 0/1] add proximity rate option for vcnl3020
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• Re: [PATCH v4] iio: sx9310: Support ACPI property
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 1/2] iio: proximity: vcnl3020: add proximity rate
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• Re: [PATCH 1/2] iio: proximity: vcnl3020: add proximity rate
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH v2 4/9] iio/drivers/as73211: Use HZ macros
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• [PATCH v2 6/9] iio/drivers/hid-sensor: Use HZ macros
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] units: Use the HZ_PER_KHZ macro
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH v8 17/22] counter: Add character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 2/2] units: Use the HZ_PER_KHZ macro
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH 2/2] units: Use the HZ_PER_KHZ macro
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: ad5686: Add PWM as a trigger source
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3 1/1] iio: adc: ad7124: allow more than 8 channels
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH v3 0/1] iio: adc: ad7124: allow more than 8 channels
  • From: <alexandru.tachici@xxxxxxxxxx>
• [PATCH] staging: iio: remove mention of defunct list
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/2] add support for GPIO or IRQ based evemt counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2] iio: core: use kstrdup_const/kfree_const for buffer attributes
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v6 0/2] add support for GPIO or IRQ based evemt counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: core: use kfree_const in iio_free_chan_devattr_list() to free names
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v3 6/6] iio: buffer-dma: add support for cyclic DMA transfers
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v8 12/22] counter: Rename counter_count_function to counter_function
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: adc: ab8500-gpadc: Fix off by 10 to 3
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [RESEND][PATCH v4 2/2] Added AMS tsl2591 device tree binding
  • From: Joe Sandom <joe.g.sandom@xxxxxxxxx>
• [RESEND][PATCH v4 1/2] Added AMS tsl2591 driver implementation
  • From: Joe Sandom <joe.g.sandom@xxxxxxxxx>
• [PATCH v4 2/2] Added AMS tsl2591 device tree binding
  • From: Joe Sandom <joe.g.sandom@xxxxxxxxx>
• [PATCH v4 1/2] Added AMS tsl2591 driver implementation
  • From: Joe Sandom <joe.g.sandom@xxxxxxxxx>
• Re: [PATCH 1/2] iio: core: use kfree_const in iio_free_chan_devattr_list() to free names
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v8 18/22] docs: counter: Document character device interface
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v8 09/22] counter: Return error code on invalid modes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 03/22] counter: 104-quad-8: Return error when invalid mode during ceiling_write
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v6 0/2] add support for GPIO or IRQ based evemt counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [RESEND] [PATCH 1/2] iio: adc: qcom-spmi-vadc: Use right ratiometric range for 8998,660,845
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: adc: npcm_adc: Replace indio_dev->mlock with own device lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: palmas_gpadc: Replace indio_dev->mlock with own device lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: spear_adc: Replace indio_dev->mlock with own device lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 39/46] dt-bindings:iio:dac:ad5755: txt to yaml format conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 9/9] iio: inkern: Drop io-channel-ranges dt property support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: cros_ec: do an early exit if not physical_device case
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio:health:afe4403: Fix naming of tx supply to match dt-bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: fix warnings about passing signed values to %u
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ab8500-gpadc: Fix off by 10 to 3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] iio: acpi_als: Add sotfware trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 0/7] IIO ABI documentation duplication fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 5/7] iio:ABI docs: Combine sysfs-bus-iio-humidity-hdc2010/hdc100x into one file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 1/7] iio:ABI docs: Fix up duplicate *_calibbias_* documentation for icm42600
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:adc:stm32-adc: Add HAS_IOMEM dependency
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 21/24] dt-bindings:iio:cdc:adi,ad7150 binding doc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] iio: proximity: Add a ChromeOS EC MKBP proximity driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 20/22] counter: Implement events_queue_size sysfs attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mt6360: Include right header
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: magnetometer: yas530: Fix return value on errorpath
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] counter: add IRQ or GPIO based event counter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adis16400: Fix an error code in adis16400_initial_setup()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: proximity: vcnl3020: add proximity rate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: vcnl3020: add proximity rate in hz
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 19/22] counter: Implement extension*_name sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 10/22] counter: Standardize to ERANGE for limit exceeded errors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/4] Fix/Improve sync clock mode handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Control Register device tree binding request for Opt3001
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: buffer-dma: add support for cyclic DMA transfers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/6] iio: Add output buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: adi-axi-adc: fix typo in doc-string
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: core,buffer-dma: 2 fixes for the recent IIO buffer series
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 16/22] counter: Move counter enums to uapi header
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v8 13/22] counter: Internalize sysfs interface code
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v8 12/22] counter: Rename counter_count_function to counter_function
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v8 11/22] counter: Rename counter_signal_value to counter_signal_level
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v8 10/22] counter: Standardize to ERANGE for limit exceeded errors
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v8 09/22] counter: Return error code on invalid modes
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v8 03/22] counter: 104-quad-8: Return error when invalid mode during ceiling_write
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v8 02/22] docs: counter: Fix spelling
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v8 01/22] docs: counter: Consolidate Counter sysfs attributes documentation
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: chemical: scd30: fix Oops due to missing parent device
  • From: Petr Štetiar <ynezz@xxxxxxx>
• [PATCH v3 2/6] iio: kfifo-buffer: Add output buffer support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 5/6] iio: buffer-dma: Add output buffer support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 3/6] iio: triggered-buffer: extend support to configure output buffers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 6/6] iio: buffer-dma: add support for cyclic DMA transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 4/6] iio: buffer-dma: Allow to provide custom buffer ops
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 1/6] iio: Add output buffer support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 0/6] iio: Add output buffer support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 22/22] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] iio: adc: adi-axi-adc: fix typo in doc-string
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/2] iio: core: use kfree_const in iio_free_chan_devattr_list() to free names
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/2] iio: buffer-dma: fix type of 'i' in iio_dma_buffer_alloc_blocks()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 0/2] iio: core,buffer-dma: 2 fixes for the recent IIO buffer series
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v8 19/22] counter: Implement extension*_name sysfs attributes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: ad5686: Add PWM as a trigger source
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 2/5] iio: Add output buffer support
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [iio:testing 44/53] ./usr/include/linux/iio/buffer.h:16:2: error: unknown type name '__u32'
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• RE: [iio:testing 44/53] ./usr/include/linux/iio/buffer.h:16:2: error: unknown type name '__u32'
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• RE: [iio:testing 47/53] drivers/iio/buffer/industrialio-buffer-dma.c:669 iio_dma_buffer_alloc_blocks() warn: always true condition '(i >= 0) => (0-u32max >= 0)'
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: ad5686: Add PWM as a trigger source
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: dac: ad5686: Add PWM as a trigger source
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: Add output buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/5] iio: Add output buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: Documentation: update definitions for bufferY and scan_elements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][RESEND] iio: dac: ad5686: Add support for AD5673R/AD5677R
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: documentation: Document proximity sensor label use
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 03/24] iio: make use of devm_iio_kfifo_buffer_setup() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: Add relative sensitivity support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/6] iio: core: Add mmap interface infrastructure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/5] iio: Documentation: update definitions for bufferY and scan_elements
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: Control Register device tree binding request for Opt3001
  • From: Cengiz Can <cengiz@xxxxxxxxxx>
• Re: [PATCH v2 0/2] resolve read hystersis return invalid argument issue for hid sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Control Register device tree binding request for Opt3001
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 4/4] iio: adis: add helpers for locking
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: adis16475: remove property
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 2/4] iio: adis16475: improve sync scale mode handling
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 1/4] iio: adis16480: fix pps mode sampling frequency math
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• [PATCH v2 0/4] Fix/Improve sync clock mode handling
  • From: Nuno Sa <nuno.sa@xxxxxxxxxx>
• Re: [PATCH v8 20/22] counter: Implement events_queue_size sysfs attribute
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 21/22] counter: 104-quad-8: Replace mutex with spinlock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: Control Register device tree binding request for Opt3001
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: Control Register device tree binding request for Opt3001
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v6 03/24] iio: make use of devm_iio_kfifo_buffer_setup() helper
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Control Register device tree binding request for Opt3001
  • From: Ekin Böke <ekin_boke@xxxxxxxxxxx>
• Re: [PATCH v3 RESEND] Added AMS tsl2591 driver implementation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: Add relative sensitivity support
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH v2 4/5] iio: triggered-buffer: extend support to configure output buffers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 2/5] iio: Add output buffer support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 3/5] iio: kfifo-buffer: Add output buffer support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 5/5] iio: dac: ad5686: Add PWM as a trigger source
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 1/5] iio: Documentation: update definitions for bufferY and scan_elements
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2 0/5] iio: Add output buffer support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH][RESEND] iio: dac: ad5686: Add support for AD5673R/AD5677R
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 6/6] tools: iio: add example for high-speed buffer support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 5/6] iio: buffer-dma: Add mmap support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 4/6] iio: buffer-dma: reduce the type of block.size to u32
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 3/6] iio: buffer-dma: split iio_dma_buffer_fileio_free() function
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 1/6] iio: core: Add mmap interface infrastructure
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 2/6] Documentation: iio: add doc for high-speed buffer API
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 0/6] iio: core: Add mmap interface infrastructure
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v3 0/5] iio: core: Add mmap interface infrastructure
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v4] iio: sx9310: Support ACPI property
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v6 03/24] iio: make use of devm_iio_kfifo_buffer_setup() helper
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 4/5] docs: iio: fix bullet list formatting
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] docs: iio: misc fixes and improvements
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/5] iio: core: Add mmap interface infrastructure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/5] tools: iio: add example for high-speed buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adis16400: Fix an error code in adis16400_initial_setup()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v8 21/22] counter: 104-quad-8: Replace mutex with spinlock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: vcnl3020: add proximity rate in hz
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH 1/2] iio: proximity: vcnl3020: add proximity rate
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• [PATCH 0/2] add proximity rate option for vcnl3020
  • From: Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx>
• Re: [PATCH v6 00/24] iio: core,buffer: add support for multiple IIO buffers per IIO device
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• [PATCH v6 2/2] counter: add IRQ or GPIO based event counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: counter: add event-counter binding
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v6 0/2] add support for GPIO or IRQ based evemt counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v8 21/22] counter: 104-quad-8: Replace mutex with spinlock
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 17/22] counter: Add character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v8 10/22] counter: Standardize to ERANGE for limit exceeded errors
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 2/2] iio: documentation: Document accelerometer label use
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/2] iio: documentation: Document proximity sensor label use
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2] ALSA: hda: intel-dsp-config: Add SND_INTEL_BYT_PREFER_SOF Kconfig option
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2] ALSA: hda: intel-dsp-config: Add SND_INTEL_BYT_PREFER_SOF Kconfig option
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 0/5] docs: iio: misc fixes and improvements
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 1/5] docs: iio: fix example formatting
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 4/5] docs: iio: fix bullet list formatting
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 2/5] docs: iio: fix directory naming
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 3/5] docs: iio: document the 'index' attribute too
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 5/5] docs: iio: mark "repeat" sysfs attribute as optional
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH] iio: adc: mt6360: Include right header
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2] iio: magnetometer: yas530: Inlucde right header
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] iio: magnetometer: yas530: Fix return value on errorpath
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [Bug 200493] drivers\iio\magnetometer\hmc5843_i2c.c unchecked return value of devm_regmap_init_i2c() in function hmc5843_i2c_probe
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v5 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• [PATCH v3 4/5] iio: buffer-dma: Add mmap support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 5/5] tools: iio: add example for high-speed buffer support
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 3/5] iio: buffer-dma: split iio_dma_buffer_fileio_free() function
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 1/5] iio: core: Add mmap interface infrastructure
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 2/5] Documentation: iio: add doc for high-speed buffer API
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v3 0/5] iio: core: Add mmap interface infrastructure
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v4] MAINTAINERS: move Milo Kim to credits
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4] MAINTAINERS: move Milo Kim to credits
  • From: Emil Velikov <emil.l.velikov@xxxxxxxxx>
• Re: [PATCH 1/2] iio: documentation: Document proximity sensor label use
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 00/24] iio: core,buffer: add support for multiple IIO buffers per IIO device
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [Bug 200493] drivers\iio\magnetometer\hmc5843_i2c.c unchecked return value of devm_regmap_init_i2c() in function hmc5843_i2c_probe
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] iio: use getter/setter functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 00/24] iio: core,buffer: add support for multiple IIO buffers per IIO device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 24/24] tools: iio: convert iio_generic_buffer to use new IIO buffer API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: documentation: Document proximity sensor label use
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6 15/24] iio: buffer: dmaengine: obtain buffer object from attribute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: documentation: Document proximity sensor label use
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] iio: add labels with accel-location to bmc150 and kxcjk-1013 drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 03/24] iio: make use of devm_iio_kfifo_buffer_setup() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] tools: iio: add example for high-speed buffer support
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [Bug 211741] amd-hid: add support for SW_TABLET_MODE
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 200555] Missing check of the return value of devm_regmap_init_i2c() in drivers/iio/magnetometer/hmc5843_i2c.c
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v6 01/24] iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [Bug 200493] drivers\iio\magnetometer\hmc5843_i2c.c unchecked return value of devm_regmap_init_i2c() in function hmc5843_i2c_probe
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v5 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• [Bug 80511] iio/frequency/ad9832.c:125: pointless test ?
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH v5 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 01/22] docs: counter: Consolidate Counter sysfs attributes documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v6 23/24] tools: iio: privatize globals and functions in iio_generic_buffer.c file
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 22/24] tools: iio: make iioutils_get_type() private in iio_utils
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 21/24] iio: core: rename 'dev' -> 'indio_dev' in iio_device_alloc()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 24/24] tools: iio: convert iio_generic_buffer to use new IIO buffer API
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 20/24] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 19/24] iio: buffer: introduce support for attaching more IIO buffers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 18/24] iio: dummy: iio_simple_dummy_buffer: use triggered buffer core calls
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 17/24] iio: buffer: move __iio_buffer_free_sysfs_and_mask() before alloc
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 16/24] iio: core: wrap iio device & buffer into struct for character devices
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 15/24] iio: buffer: dmaengine: obtain buffer object from attribute
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 14/24] iio: buffer: wrap all buffer attributes into iio_dev_attr
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 12/24] iio: core: merge buffer/ & scan_elements/ attributes
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 13/24] iio: add reference to iio buffer on iio_dev_attr
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 11/24] iio: buffer: group attr count and attr alloc
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 10/24] iio: core: rework iio device group creation
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 09/24] iio: core-trigger: make iio_device_register_trigger_consumer() an int return
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 08/24] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 07/24] docs: ioctl-number.rst: reserve IIO subsystem ioctl() space
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 06/24] iio: buffer-dma,adi-axi-adc: introduce devm_iio_dmaengine_buffer_setup()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 05/24] iio: kfifo: un-export devm_iio_kfifo_allocate() function
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 04/24] iio: accel: sca3000: use devm_iio_kfifo_buffer_setup() helper
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 03/24] iio: make use of devm_iio_kfifo_buffer_setup() helper
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 00/24] iio: core,buffer: add support for multiple IIO buffers per IIO device
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 02/24] iio: kfifo: add devm_iio_kfifo_buffer_setup() helper
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 01/24] iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v5 13/17] iio: buffer: add ioctl() to support opening extra buffers for IIO device
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: samsung,exynos-adc: add common clock properties
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v8 17/22] counter: Add character device interface
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] counter: add IRQ or GPIO based event counter
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>