On Wed, 9 Jun 2021 10:31:04 +0900 William Breathitt Gray <vilhelm.gray@xxxxxxxxx> wrote: > Duplicate ABIs are not valid, so let's consolidate these sysfs > attributes into the main sysfs-bus-counter documentation file. > > Cc: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx> > Reviewed-by: David Lechner <david@xxxxxxxxxxxxxx> > Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx> Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to see if they find anything that we missed. Thanks, Jonathan > --- > Documentation/ABI/testing/sysfs-bus-counter | 76 ++++++++++++++++++- > .../ABI/testing/sysfs-bus-counter-104-quad-8 | 61 --------------- > .../ABI/testing/sysfs-bus-counter-ftm-quaddec | 16 ---- > MAINTAINERS | 4 +- > 4 files changed, 75 insertions(+), 82 deletions(-) > delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 > delete mode 100644 Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec > > diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter > index e9d9e50f03be..20fe5afd4f9e 100644 > --- a/Documentation/ABI/testing/sysfs-bus-counter > +++ b/Documentation/ABI/testing/sysfs-bus-counter > @@ -57,6 +57,7 @@ Description: > What: /sys/bus/counter/devices/counterX/countY/count_mode_available > What: /sys/bus/counter/devices/counterX/countY/error_noise_available > What: /sys/bus/counter/devices/counterX/countY/function_available > +What: /sys/bus/counter/devices/counterX/countY/prescaler_available > What: /sys/bus/counter/devices/counterX/countY/signalZ_action_available > KernelVersion: 5.2 > Contact: linux-iio@xxxxxxxxxxxxxxx > @@ -154,6 +155,15 @@ Description: > Count Y. If possible, this should match the name of the > respective channel as it appears in the device datasheet. > > +What: /sys/bus/counter/devices/counterX/countY/prescaler > +KernelVersion: 5.2 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Configure the prescaler value associated with Count Y. > + On the FlexTimer, the counter clock source passes through a > + prescaler (i.e. a counter). This acts like a clock > + divider. > + > What: /sys/bus/counter/devices/counterX/countY/preset > KernelVersion: 5.2 > Contact: linux-iio@xxxxxxxxxxxxxxx > @@ -224,11 +234,45 @@ Description: > Read-only attribute that indicates the total number of Signals > belonging to the Counter. > > -What: /sys/bus/counter/devices/counterX/signalY/signal > +What: /sys/bus/counter/devices/counterX/signalY/cable_fault > +KernelVersion: 5.7 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Read-only attribute that indicates whether a differential > + encoder cable fault (not connected or loose wires) is detected > + for the respective channel of Signal Y. Valid attribute values > + are boolean. Detection must first be enabled via the > + corresponding cable_fault_enable attribute. > + > +What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable > +KernelVersion: 5.7 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Whether detection of differential encoder cable faults for the > + respective channel of Signal Y is enabled. Valid attribute > + values are boolean. > + > +What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler > +KernelVersion: 5.7 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Filter clock factor for input Signal Y. This prescaler value > + affects the inputs of both quadrature pair signals. > + > +What: /sys/bus/counter/devices/counterX/signalY/index_polarity > KernelVersion: 5.2 > Contact: linux-iio@xxxxxxxxxxxxxxx > Description: > - Signal data of Signal Y represented as a string. > + Active level of index input Signal Y; irrelevant in > + non-synchronous load mode. > + > +What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available > +What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available > +KernelVersion: 5.2 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Discrete set of available values for the respective Signal Y > + configuration are listed in this file. > > What: /sys/bus/counter/devices/counterX/signalY/name > KernelVersion: 5.2 > @@ -237,3 +281,31 @@ Description: > Read-only attribute that indicates the device-specific name of > Signal Y. If possible, this should match the name of the > respective signal as it appears in the device datasheet. > + > +What: /sys/bus/counter/devices/counterX/signalY/signal > +KernelVersion: 5.2 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Signal data of Signal Y represented as a string. > + > +What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode > +KernelVersion: 5.2 > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Configure the counter associated with Signal Y for > + non-synchronous or synchronous load mode. Synchronous load mode > + cannot be selected in non-quadrature (Pulse-Direction) clock > + mode. > + > + non-synchronous: > + A logic low level is the active level at this index > + input. The index function (as enabled via preset_enable) > + is performed directly on the active level of the index > + input. > + > + synchronous: > + Intended for interfacing with encoder Index output in > + quadrature clock mode. The active level is configured > + via index_polarity. The index function (as enabled via > + preset_enable) is performed synchronously with the > + quadrature clock on the active level of the index input. > diff --git a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 > deleted file mode 100644 > index eac32180c40d..000000000000 > --- a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 > +++ /dev/null > @@ -1,61 +0,0 @@ > -What: /sys/bus/counter/devices/counterX/signalY/cable_fault > -KernelVersion: 5.7 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Read-only attribute that indicates whether a differential > - encoder cable fault (not connected or loose wires) is detected > - for the respective channel of Signal Y. Valid attribute values > - are boolean. Detection must first be enabled via the > - corresponding cable_fault_enable attribute. > - > -What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable > -KernelVersion: 5.7 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Whether detection of differential encoder cable faults for the > - respective channel of Signal Y is enabled. Valid attribute > - values are boolean. > - > -What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler > -KernelVersion: 5.7 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Filter clock factor for input Signal Y. This prescaler value > - affects the inputs of both quadrature pair signals. > - > -What: /sys/bus/counter/devices/counterX/signalY/index_polarity > -KernelVersion: 5.2 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Active level of index input Signal Y; irrelevant in > - non-synchronous load mode. > - > -What: /sys/bus/counter/devices/counterX/signalY/index_polarity_available > -What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_available > -KernelVersion: 5.2 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Discrete set of available values for the respective Signal Y > - configuration are listed in this file. > - > -What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode > -KernelVersion: 5.2 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Configure the counter associated with Signal Y for > - non-synchronous or synchronous load mode. Synchronous load mode > - cannot be selected in non-quadrature (Pulse-Direction) clock > - mode. > - > - non-synchronous: > - A logic low level is the active level at this index > - input. The index function (as enabled via preset_enable) > - is performed directly on the active level of the index > - input. > - > - synchronous: > - Intended for interfacing with encoder Index output in > - quadrature clock mode. The active level is configured > - via index_polarity. The index function (as enabled via > - preset_enable) is performed synchronously with the > - quadrature clock on the active level of the index input. > diff --git a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec b/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec > deleted file mode 100644 > index 7d2e7b363467..000000000000 > --- a/Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec > +++ /dev/null > @@ -1,16 +0,0 @@ > -What: /sys/bus/counter/devices/counterX/countY/prescaler_available > -KernelVersion: 5.2 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Discrete set of available values for the respective Count Y > - configuration are listed in this file. Values are delimited by > - newline characters. > - > -What: /sys/bus/counter/devices/counterX/countY/prescaler > -KernelVersion: 5.2 > -Contact: linux-iio@xxxxxxxxxxxxxxx > -Description: > - Configure the prescaler value associated with Count Y. > - On the FlexTimer, the counter clock source passes through a > - prescaler (i.e. a counter). This acts like a clock > - divider. > diff --git a/MAINTAINERS b/MAINTAINERS > index e679d422b472..8fa9202610c5 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -299,7 +299,6 @@ M: William Breathitt Gray <vilhelm.gray@xxxxxxxxx> > M: Syed Nayyar Waris <syednwaris@xxxxxxxxx> > L: linux-iio@xxxxxxxxxxxxxxx > S: Maintained > -F: Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 > F: drivers/counter/104-quad-8.c > > ACCES PCI-IDIO-16 GPIO DRIVER > @@ -4675,7 +4674,7 @@ COUNTER SUBSYSTEM > M: William Breathitt Gray <vilhelm.gray@xxxxxxxxx> > L: linux-iio@xxxxxxxxxxxxxxx > S: Maintained > -F: Documentation/ABI/testing/sysfs-bus-counter* > +F: Documentation/ABI/testing/sysfs-bus-counter > F: Documentation/driver-api/generic-counter.rst > F: drivers/counter/ > F: include/linux/counter.h > @@ -7087,7 +7086,6 @@ FLEXTIMER FTM-QUADDEC DRIVER > M: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx> > L: linux-iio@xxxxxxxxxxxxxxx > S: Maintained > -F: Documentation/ABI/testing/sysfs-bus-counter-ftm-quaddec > F: Documentation/devicetree/bindings/counter/ftm-quaddec.txt > F: drivers/counter/ftm-quaddec.c >
