Re: [PATCH v5 3/4] dt-bindings: iio: adc: Add Xilinx AMS binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 28, 2021 at 06:29:58PM +0100, Anand Ashok Dumbre wrote:
> Xilinx AMS have several ADC channels that can be used for measurement of
> different voltages and temperatures. Document the same in the bindings.
> 
> Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xxxxxxxxxx>
> ---
>  .../bindings/iio/adc/xlnx,zynqmp-ams.yaml     | 265 ++++++++++++++++++
>  1 file changed, 265 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
> new file mode 100644
> index 000000000000..df3cfca69e2d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
> @@ -0,0 +1,265 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx Zynq Ultrascale AMS controller
> +
> +maintainers:
> +  - Anand Ashok Dumbre <anand.ashok.dumbre@xxxxxxxxxx>
> +
> +description: |
> +  The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
> +  that can be used to sample external voltages and monitor on-die operating
> +  conditions, such as temperature and supply voltage levels.
> +  The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
> +  PS (Processing System) SYSMON.
> +  All designs should have AMS registers, but PS and PL are optional. The
> +  AMS controller can work with only PS, only PL and both PS and PL
> +  configurations. Please specify registers according to your design. Devicetree
> +  should always have AMS module property. Providing PS & PL module is optional.
> +
> +  AMS Channel Details
> +  ```````````````````
> +  Sysmon Block	|Channel|			Details					|Measurement
> +  		|Number	|							 	|Type

Use spaces rather than tabs

> +  ---------------------------------------------------------------------------------------------------------
> +  AMS CTRL	|0	|System PLLs voltage measurement, VCC_PSPLL.			|Voltage
> +  		|1	|Battery voltage measurement, VCC_PSBATT.			|Voltage
> +  		|2	|PL Internal voltage measurement, VCCINT.			|Voltage
> +  		|3	|Block RAM voltage measurement, VCCBRAM.			|Voltage
> +  		|4	|PL Aux voltage measurement, VCCAUX.				|Voltage
> +  		|5	|Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL.	|Voltage
> +  		|6	|VCC_PSINTFP_DDR voltage measurement.				|Voltage
> +  ---------------------------------------------------------------------------------------------------------
> +  PS Sysmon	|7	|LPD temperature measurement.					|Temperature
> +  		|8	|FPD temperature measurement (REMOTE).				|Temperature
> +  		|9	|VCC PS LPD voltage measurement (supply1).			|Voltage
> +  		|10	|VCC PS FPD voltage measurement (supply2).			|Voltage
> +  		|11	|PS Aux voltage reference (supply3).				|Voltage
> +  		|12	|DDR I/O VCC voltage measurement.				|Voltage
> +  		|13	|PS IO Bank 503 voltage measurement (supply5).			|Voltage
> +  		|14	|PS IO Bank 500 voltage measurement (supply6).			|Voltage
> +  		|15	|VCCO_PSIO1 voltage measurement.				|Voltage
> +  		|16	|VCCO_PSIO2 voltage measurement.				|Voltage
> +  		|17	|VCC_PS_GTR voltage measurement (VPS_MGTRAVCC).			|Voltage
> +  		|18	|VTT_PS_GTR voltage measurement (VPS_MGTRAVTT).			|Voltage
> +  		|19	|VCC_PSADC voltage measurement.					|Voltage
> +  ---------------------------------------------------------------------------------------------------------
> +  PL Sysmon	|20	|PL temperature measurement.					|Temperature
> +  		|21	|PL Internal voltage measurement, VCCINT.			|Voltage
> +  		|22	|PL Auxiliary voltage measurement, VCCAUX.			|Voltage
> +  		|23	|ADC Reference P+ voltage measurement.				|Voltage
> +  		|24	|ADC Reference N- voltage measurement.				|Voltage
> +  		|25	|PL Block RAM voltage measurement, VCCBRAM.			|Voltage
> +  		|26	|LPD Internal voltage measurement, VCC_PSINTLP (supply4).	|Voltage
> +  		|27	|FPD Internal voltage measurement, VCC_PSINTFP (supply5).	|Voltage
> +  		|28	|PS Auxiliary voltage measurement (supply6).			|Voltage
> +  		|29	|PL VCCADC voltage measurement (vccams).			|Voltage
> +  		|30	|Differential analog input signal voltage measurment.		|Voltage
> +  		|31	|VUser0 voltage measurement (supply7).				|Voltage
> +  		|32	|VUser1 voltage measurement (supply8).				|Voltage
> +  		|33	|VUser2 voltage measurement (supply9).				|Voltage
> +  		|34	|VUser3 voltage measurement (supply10).				|Voltage
> +  		|35	|Auxiliary ch 0 voltage measurement (VAux0).			|Voltage
> +  		|36	|Auxiliary ch 1 voltage measurement (VAux1).			|Voltage
> +  		|37	|Auxiliary ch 2 voltage measurement (VAux2).			|Voltage
> +  		|38	|Auxiliary ch 3 voltage measurement (VAux3).			|Voltage
> +  		|39	|Auxiliary ch 4 voltage measurement (VAux4).			|Voltage
> +  		|40	|Auxiliary ch 5 voltage measurement (VAux5).			|Voltage
> +  		|41	|Auxiliary ch 6 voltage measurement (VAux6).			|Voltage
> +  		|42	|Auxiliary ch 7 voltage measurement (VAux7).			|Voltage
> +  		|43	|Auxiliary ch 8 voltage measurement (VAux8).			|Voltage
> +  		|44	|Auxiliary ch 9 voltage measurement (VAux9).			|Voltage
> +  		|45	|Auxiliary ch 10 voltage measurement (VAux10).			|Voltage
> +  		|46	|Auxiliary ch 11 voltage measurement (VAux11).			|Voltage
> +  		|47	|Auxiliary ch 12 voltage measurement (VAux12).			|Voltage
> +  		|48	|Auxiliary ch 13 voltage measurement (VAux13).			|Voltage
> +  		|49	|Auxiliary ch 14 voltage measurement (VAux14).			|Voltage
> +  		|50	|Auxiliary ch 15 voltage measurement (VAux15).			|Voltage
> +  --------------------------------------------------------------------------------------------------------
> +
> +properties:
> +  compatible:
> +    enum:
> +      - xlnx,zynqmp-ams
> +
> +  interrupts:
> +    description: IRQ line for AMS

Drop.

> +    maxItems: 1
> +
> +  interrupt-names:
> +    items:
> +      - const: ams-irq

Kind of a pointless name. You don't need *-names unless you have more 
than one.

> +
> +  reg:
> +    description: AMS Controller register space
> +    maxItems: 1
> +
> +  reg-names:
> +    items:
> +      - const: ams-base
> +
> +  ranges:
> +    description:
> +      Keep the property empty to map child address space
> +      (for PS and/or PL) nodes 1:1 onto the parent address space.
> +    maxItems: 1

This contradicts 'empty'.

> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +
> +  '#io-channel-cells':
> +    const: 1
> +
> +patternProperties:
> +  "^ams-ps@0,0$":

If you have a non standard unit-address, you need to define the fields.

> +    type: object
> +    description: |
> +      PS (Processing System) SYSMON is memory mapped to PS. This block has
> +      built-in alarm generation logic that is used to interrupt the processor
> +      based on condition set.
> +
> +    properties:
> +      compatible:
> +          enum:
> +            - xlnx,zynqmp-ams-ps
> +
> +      reg:
> +        description: Register Space for PS-SYSMON
> +        maxItems: 1
> +
> +    required:
> +      - compatible
> +      - reg
> +
> +    additionalProperties: false
> +
> +  "^ams-pl@1,0$":

What does the '1' correspond to?

> +    type: object
> +    description:
> +      PL-SYSMON is capable of monitoring off chip voltage and temperature.
> +      PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
> +      from external master. Out of this interface currently only DRP is
> +      supported. This block has alarm generation logic that is used to
> +      interrupt the processor based on condition set.
> +
> +    properties:
> +      compatible:
> +        items:
> +          - enum:
> +              - xlnx,zynqmp-ams-pl
> +
> +      reg:
> +        description: Register Space for PL-SYSMON.
> +        maxItems: 1
> +
> +    required:
> +      - compatible
> +      - reg
> +
> +    additionalProperties: false
> +
> +    patternProperties:
> +      "^xlnx,ext-channels$":

Not a pattern. Put under 'properties'.

> +
> +        type: object
> +
> +        description:
> +          List of external channels that are connected to the AMS PL module.
> +          If this property is not present, no external channels will be
> +          assumed to be connected.
> +
> +        properties:
> +          '#address-cells':
> +            const: 1
> +
> +          '#size-cells':
> +             const: 0
> +
> +        additionalProperties: false
> +
> +        patternProperties:
> +          "^channel@([0-9]{1,2}|1[0-5][0-9])$":
> +            type: object
> +            description:
> +              Describes the external channels connected.
> +
> +            properties:
> +              reg:
> +                $ref: /schemas/types.yaml#/definitions/uint32

'reg' already has a type.

> +                description:
> +                  Pair of pins the channel is connected to. This value is
> +                  same as Channel Number for a particular channel.
> +                minimum: 20
> +                maximum: 50

Based on the unit-address, the max is 159.

> +
> +              xlnx,bipolar:
> +                $ref: /schemas/types.yaml#/definitions/flag
> +                type: boolean
> +                description:
> +                  If the set channel is used in bipolar mode.
> +
> +            required:
> +              - reg
> +
> +            additionalProperties: false
> +
> +required:
> +  - compatible
> +  - interrupts
> +  - interrupt-names
> +  - reg
> +  - reg-names
> +  - ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        xilinx_ams: ams@ffa50000 {
> +            compatible = "xlnx,zynqmp-ams";
> +            interrupt-parent = <&gic>;
> +            interrupts = <0 56 4>;
> +            interrupt-names = "ams-irq";
> +            reg = <0x0 0xffa50000 0x0 0x800>;
> +            reg-names = "ams-base";
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            #io-channel-cells = <1>;
> +            ranges = <0 0 0xffa50800 0x800>;
> +
> +            ams_ps: ams-ps@0,0 {
> +                compatible = "xlnx,zynqmp-ams-ps";
> +                reg = <0 0x400>;
> +            };
> +
> +            ams_pl: ams-pl@1,0 {
> +                compatible = "xlnx,zynqmp-ams-pl";
> +                reg = <0x400 0x400>;
> +                xlnx,ext-channels {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    channel@30 {
> +                        reg = <30>;
> +                        xlnx,bipolar;
> +                    };
> +                    channel@31 {
> +                        reg = <31>;
> +                    };
> +                    channel@38 {
> +                        reg = <38>;
> +                        xlnx,bipolar;
> +                    };
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.17.1



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux