Linux IIO Development

• Thread Index

• [PULL] IIO - Second set of fixes for the 4.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging:iio: Delete some commented out lines in Kconfig and Makefile.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC v2 1/1] iio: light: add MAX30100 oximeter driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: vz89x: rework i2c transfer reading
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2 v3] iio: st_sensors: support active-low interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/adc/ad9467.c: Add support for AD9649
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: vz89x: rework i2c transfer reading
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [RFC v2 1/1] iio: light: add MAX30100 oximeter driver support
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH] IIO: adc: at91_adc.c Prefer kmalloc_array over kmalloc with multiply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] staging:iio: Delete some commented out lines in Kconfig and Makefile.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging:iio: Delete some commented out lines in Kconfig.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: vz89x: rework i2c transfer reading
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: lidar: optimize i2c transactions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging:iio: Delete some commented out lines in Kconfig.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: adc: spmi-vadc: add missing of_node_put
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Move IIO Dummy Driver out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] staging:iio: Delete some commented out lines in Kconfig.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 8/9] iio: buffer: allow for last-second trigger spawning from device driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Move IIO Dummy Driver out of staging
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [RFC 6/9] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging:iio:ad7780: Remove the ad7780_platform_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 6/8] input: touchscreen: imx25 tcq driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 6/8] input: touchscreen: imx25 tcq driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 4/8] mfd: fsl imx25 Touchscreen ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 4/8] mfd: fsl imx25 Touchscreen ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: adc: add IMX7D ADC driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC v2 1/1] iio: light: add MAX30100 oximeter driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [patch] iio: fix some warning messages
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Cherry picked across patches from temporary fixes branch.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [patch] iio: fix some warning messages
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [RFC v2 1/1] iio: light: add MAX30100 oximeter driver support
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: adc: add IMX7D ADC driver support
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v3 3/4] ARM: dts: imx7d.dtsi: add ADC support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH v3 0/4] Add i.mx7d adc driver support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH v3 1/4] iio: adc: add IMX7D ADC driver support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH v3 2/4] Documentation: add the binding file for Freescale imx7d ADC driver
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH v3 4/4] ARM: dts: imx7d-sdb: add ADC support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• Re: [PATCH v8 6/8] input: touchscreen: imx25 tcq driver
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v2] iio: st_sensors: support active-low interrupts
  • From: Giuseppe BARBA <giuseppe.barba@xxxxxx>
• Re: [PATCH] staging:iio:ad7780: Remove the ad7780_platform_data
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [RFC 8/9] iio: buffer: allow for last-second trigger spawning from device driver
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [PATCH 1/2 v3] iio: st_sensors: support active-low interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2 v2] iio: st_sensors: support active-low interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Surface 3 HID parsing errors
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH 0/4] add missing of_node_put
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PATCH 3/4] iio: adc: spmi-vadc: add missing of_node_put
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: [PULL] First set of iio fixes for the 4.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: xilinx: constify iio_buffer_setup_ops structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging:iio:ad7780: Switch to the gpio descriptor interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 8/9] iio: buffer: allow for last-second trigger spawning from device driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 5/9] iio: Documentation: Add IIO configfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC 5/9] iio: Documentation: Add IIO configfs documentation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [RFC 5/9] iio: Documentation: Add IIO configfs documentation
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [RFC 5/9] iio: Documentation: Add IIO configfs documentation
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• [RFC 0/9] spawn hrtimer trigger from client driver upon enabling buffer
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 2/9] iio: core: Introduce IIO configfs support
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 3/9] iio: core: Introduce IIO software triggers
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 1/9] configfs: Allow dynamic group creation
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 7/9] iio: ina2xx: add triggered buffer
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 6/9] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 5/9] iio: Documentation: Add IIO configfs documentation
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 4/9] iio: trigger: Introduce IIO hrtimer based trigger
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 8/9] iio: buffer: allow for last-second trigger spawning from device driver
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 9/9] iio: (RFC) illustrate creation/destruction of hrtimer trigger upon buffer enable
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [PATCH] staging:iio:ad7780: Remove the ad7780_platform_data
  • From: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
• [PATCH v2] staging:iio:ad7780: Switch to the gpio descriptor interface
  • From: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
• Re: [PATCH v2] staging:iio:ad7780: Switch to the gpio descriptor interface
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] staging:iio:ad7780: Switch to the gpio descriptor interface
  • From: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
• Re: [PATCH] staging:iio:ad7780: Switch to the gpio descriptor interface
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [RFC v2 1/1] iio: light: add MAX30100 oximeter driver support
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [RFC v2 0/1] iio: light: add MAX30100 oximeter driver support
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio: proximity: lidar: optimize i2c transactions
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH] iio: chemical: vz89x: rework i2c transfer reading
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: mma8452: add freefall detection for Freescale's accelerometers
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH v8 3/8] ARM: dt: Binding documentation for imx25 touchscreen controller
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v8 6/8] input: touchscreen: imx25 tcq driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 2/2] iio: health: Add driver for the TI AFE4404 heart monitor
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [RFC 1/2] ABI: iio: support AVERAGING_RATIO setting
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [RFC 1/2] ABI: iio: support AVERAGING_RATIO setting
  • From: jic23@xxxxxxxxxxxxxxxxxxxxx
• [RFC 1/2] ABI: iio: support AVERAGING_RATIO setting
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 0/2] ABI: IIO: proposal for AVERAGING_RATIO support
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 2/2] iio: ina2xx: convert AVERGING ratio setting from generic sysfs attr to ABI
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH v8 3/8] ARM: dt: Binding documentation for imx25 touchscreen controller
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: request any context IRQ
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 2/8] ARM: dt: Binding documentation for imx25 GCQ
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [RFC v2 1/2] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/8] ARM: dt: Binding documentation for imx25 GCQ
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2 v2] iio: st_sensors: support active-low interrupts
  • From: Giuseppe BARBA <giuseppe.barba@xxxxxx>
• Re: [PATCH v8 3/8] ARM: dt: Binding documentation for imx25 touchscreen controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 1/8] ARM: dt: Binding documentation for imx25 ADC/TSC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2 v2] iio: st_sensors: support active-low interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v8 1/8] ARM: dt: Binding documentation for imx25 ADC/TSC
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v8 8/8] ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller and ADC support.
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v8 0/8] imx25 adc and touchscreen driver
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v8 3/8] ARM: dt: Binding documentation for imx25 touchscreen controller
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v8 6/8] input: touchscreen: imx25 tcq driver
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v8 5/8] iio: adc: fsl,imx25-gcq driver
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v8 4/8] mfd: fsl imx25 Touchscreen ADC driver
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v8 2/8] ARM: dt: Binding documentation for imx25 GCQ
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v8 7/8] ARM: dts: imx25: Add TSC and ADC support
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2 v2] iio: st_sensors: support active-low interrupts
  • From: Giuseppe BARBA <giuseppe.barba@xxxxxx>
• Re: [RFC 4/4] iio: ina2xx: add SOFTWARE buffer mode using an iio kfifo.
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [RFC v2 1/2] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: st_sensors: support open drain mode
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v2] iio: st_sensors: support active-low interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: st_sensors: support open drain mode
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: support active-low interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio/adc/ad9467.c: Add support for AD9649
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• Re: [PATCH] IIO: adc: xilinx-xadc-core.c: constify iio_buffer_setup_ops structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: st_sensors: support open drain mode
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: support active-low interrupts
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v5 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH v5 0/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH] IIO: adc: at91_adc.c Prefer kmalloc_array over kmalloc with multiply
  • From: Nizam Haider <nizamhaider786@xxxxxxxxx>
• [PATCH] IIO: adc: xilinx-xadc-core.c: constify iio_buffer_setup_ops structure
  • From: Nizam Haider <nizamhaider786@xxxxxxxxx>
• Re: [RFC v1] iio: light: add MAX30100 oximeter driver support
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH] iio: adc: xilinx: constify iio_buffer_setup_ops structure
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: adc: xilinx: constify iio_buffer_setup_ops structure
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• [PULL] First set of iio fixes for the 4.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: support active-low interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: request any context IRQ
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: support active-low interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: request any context IRQ
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: adc: vf610: Avoid division by zero
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: iio_simple_dummy_buffer: Typo in comments area
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC v1] iio: light: add MAX30100 oximeter driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: health: Add driver for the TI AFE4404 heart monitor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: iio_simple_dummy_buffer: Typo in comments area
  • From: Nizam Haider <nizamhaider786@xxxxxxxxx>
• Re: [PATCH] iio: light: apds9960: correct ->last_busy count
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7793: removed unnecessary else.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mxs-lradc: Prefer using the BIT macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: mxs-lradc: Prefer using the BIT macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: ti-ads8688: Add DT binding documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] iio: adc: Add TI ADS8688
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: core: added support for IIO_VAL_INT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: xilinx: Fix VREFN scale
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: st_sensors: support open drain mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: st_sensors: support active-low interrupts
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: st_sensors: support open drain mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4] iio: st-accel: add support for lis2dh12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: mma8452: add freefall detection for Freescale's accelerometers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC v2 1/2] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: mma8452: add freefall detection for Freescale's accelerometers
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [RFC 4/4] iio: ina2xx: add SOFTWARE buffer mode using an iio kfifo.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_sensors: request any context IRQ
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: mma8452: add freefall detection for Freescale's accelerometers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: add IMX7D ADC driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: add IMX7D ADC driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: iio_simple_dummy_buffer: Typo in comments area
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: iio_simple_dummy_buffer: Typo in comments area
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] Staging: iio: iio_simple_dummy_buffer: Typo in comments area
  • From: Nizam Haider <nizamhaider786@xxxxxxxxx>
• [PATCH 2/2] iio: st_sensors: support open drain mode
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] iio: st_sensors: support active-low interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: add IMX7D ADC driver support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: add IMX7D ADC driver support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [RFC v1] iio: light: add MAX30100 oximeter driver support
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH 1/3] iio: mma8452: add freefall detection for Freescale's accelerometers
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH] iio: st_sensors: request any context IRQ
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [RFC v2 2/2] iio: ina2xx: add SOFTWARE buffer mode using an iio kfifo.
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC v2 1/2] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [RFC 4/4] iio: ina2xx: add SOFTWARE buffer mode using an iio kfifo.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [RFC 4/4] iio: ina2xx: add SOFTWARE buffer mode using an iio kfifo.
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [RFC 1/4] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [RFC 1/4] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH v4] iio: st-accel: add support for lis2dh12
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v4] iio: st-accel: add support for lis2dh12
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v4] iio: st-accel: add support for lis2dh12
  • From: Giuseppe Barba <giuseppe.barba@xxxxxx>
• Re: [PATCH v3] iio: st-accel: add support for lis2dh12
  • From: Giuseppe BARBA <giuseppe.barba@xxxxxx>
• Re: [PATCH v3] iio: st-accel: add support for lis2dh12
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Joel Becker <jlbec@xxxxxxxxxxxx>
• [PATCH] iio: adc: xilinx: Fix VREFN scale
  • From: Thomas Betker <thomas.betker@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: mma8452: add freefall detection for Freescale's accelerometers
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/3] iio: mma8452: add freefall detection for Freescale's accelerometers
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH 3/3] iio: mma8452: remove unused register description
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH 2/3] iio: mma8452: use enum for numbering the axis
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH v3] iio: st-accel: add support for lis2dh12
  • From: Giuseppe Barba <giuseppe.barba@xxxxxx>
• Re: [V2] iio: st-accel: add support for lis2dh12
  • From: Giuseppe BARBA <giuseppe.barba@xxxxxx>
• Re: [V2] iio: st-accel: add support for lis2dh12
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [V2] iio: st-accel: add support for lis2dh12
  • From: Giuseppe BARBA <giuseppe.barba@xxxxxx>
• Re: Add lis2dh12 to st-sensor driver
  • From: Giuseppe BARBA <giuseppe.barba@xxxxxx>
• Re: [V2] iio: st-accel: add support for lis2dh12
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: Add lis2dh12 to st-sensor driver
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [V2] iio: st-accel: add support for lis2dh12
  • From: Giuseppe Barba <giuseppe.barba@xxxxxx>
• Add lis2dh12 to st-sensor driver
  • From: Giuseppe Barba <giuseppe.barba@xxxxxx>
• Re: [RFC 1/4] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [RFC 2/4] iio: ina2xx: add SAMP_FREQ attribute.
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [RFC 1/4] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v4 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: health: Add driver for the TI AFE4404 heart monitor
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [RFC 4/4] iio: ina2xx: add SOFTWARE buffer mode using an iio kfifo.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [RFC 0/4] IIO: add support for INA2xx power monitor
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 1/4] iio: ina2xx: add direct IO support for TI INA2xx Power Monitors
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 2/4] iio: ina2xx: add SAMP_FREQ attribute.
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 3/4] iio: ina2xx: add debugfs reg access
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• [RFC 4/4] iio: ina2xx: add SOFTWARE buffer mode using an iio kfifo.
  • From: Marc Titinger <mtitinger@xxxxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: add IMX7D ADC driver support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v4 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Adriana Reus <adriana.reus@xxxxxxxxx>
• Re: [PATCH V1 1/1] iio: as6200: add AS6200 temperature sensor driver from ams AG
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH V1 1/1] iio: as6200: add AS6200 temperature sensor driver from ams AG
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• [PATCH V1 1/1] iio: as6200: add AS6200 temperature sensor driver from ams AG
  • From: Florian Lobmaier <Florian.Lobmaier@xxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v6 2/2] iio: ti-ads8688: Add DT binding documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/4] Documentation: add the binding file for Freescale imx7d ADC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH-RESEND] iio: st-accel: add support for lis2dh12
  • From: Giuseppe Barba <giuseppe.barba@xxxxxx>
• [PATCH] iio: st-accel: add support for lis2dh12
  • From: Giuseppe Barba <giuseppe.barba@xxxxxx>
• Re: [PATCH] iio: adc: mxs-lradc: Prefer using the BIT macro
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] iio: adc: mxs-lradc: Prefer using the BIT macro
  • From: Nizam Haider <nizamhaider786@xxxxxxxxx>
• [PATCH v2 3/4] ARM: dts: imx7d.dtsi: add ADC support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH v2 2/4] Documentation: add the binding file for Freescale imx7d ADC driver
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH v2 4/4] ARM: dts: imx7d-sdb: add ADC support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH v2 1/4] iio: adc: add IMX7D ADC driver support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH v2 0/4] Add i.mx7d adc driver support
  • From: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
• [PATCH v3] iio: core: added support for IIO_VAL_INT
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• [PATCH v6 1/2] iio: adc: Add TI ADS8688
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• [PATCH v6 2/2] iio: ti-ads8688: Add DT binding documentation
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• [PATCH] iio: adc: ad7793: removed unnecessary else.
  • From: Nizam Haider <nizamhaider786@xxxxxxxxx>
• Re: IIO device indexing issue
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• [PATCH v2] iio: core: added support for IIO_VAL_INT
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• Re: [PATCH v4 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH] iio: light: apds9960: correct ->last_busy count
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH v4 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH v4 0/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH] iio: si7020: Swap data byte order
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: check sscanf return value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: gyro: check sscanf return value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: vf610: Avoid division by zero
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Reconcile operation order between iio_register/unregister and pm functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: pa12203001: Poweroff chip if register fails
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9960: correct ->last_busy count
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:dac: fix i2c_master_send return code misuse
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:dac: fix i2c_master_send return code misuse
  • From: Jean-Francois Dagenais <jeff.dagenais@xxxxxxxxx>
• Re: [PATCH] iio:dac: fix i2c_master_send return code misuse
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v3 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH v3 0/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH v2 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH v2 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] iio: light: apds9960: correct ->last_busy count
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH v2 1/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH v2 0/1] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH] Staging: iio: Fix some character line limit coding style issues
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: Fix some character line limit coding style issues
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] Staging: iio: Fix some character line limit coding style issues
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] Staging: iio: Fix some character line limit coding style issues
  • From: Evan Hosseini <hosse005@xxxxxxx>
• Re: [PATCH] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: IIO device indexing issue
  • From: Vesa Jääskeläinen <dachaac@xxxxxxxxx>
• [PATCH] iio: pulsedlight-lidar-lite: add runtime PM
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: IIO device indexing issue
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: light: pa12203001: Poweroff chip if register fails
  • From: Adriana Reus <adriana.reus@xxxxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v3 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: IIO device indexing issue
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: health: Add driver for the TI AFE4404 heart monitor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: Reconcile operation order between iio_register/unregister and pm functions
  • From: Adriana Reus <adriana.reus@xxxxxxxxx>
• Re: [RFC PATCH] iio: accel: kxcj: Reconcile operation order between iio_register/unregister and pm functions
  • From: Adriana Reus <adriana.reus@xxxxxxxxx>
• Re: IIO device indexing issue
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: IIO device indexing issue
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: health: Add driver for the TI AFE4404 heart monitor
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 2/2] iio: health: Add driver for the TI AFE4404 heart monitor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: Heart Rate Monitors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: IIO device indexing issue
  • From: Vesa Jääskeläinen <dachaac@xxxxxxxxx>
• Re: [RFC PATCH] iio: accel: kxcj: Reconcile operation order between iio_register/unregister and pm functions
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [RFC PATCH] iio: accel: kxcj: Reconcile operation order between iio_register/unregister and pm functions
  • From: Adriana Reus <adriana.reus@xxxxxxxxx>
• Re: IIO device indexing issue
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• RE: [PATCH] iio: adc: vf610: Avoid division by zero
  • From: Duan Andy <fugang.duan@xxxxxxxxxxxxx>
• RE: vf610_adc: Division by zero
  • From: Duan Andy <fugang.duan@xxxxxxxxxxxxx>
• Re: [PATCH] iio:dac: fix i2c_master_send return code misuse
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• [PATCH] iio: adc: vf610: Avoid division by zero
  • From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
• Re: vf610_adc: Division by zero
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• vf610_adc: Division by zero
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] iio:dac: fix i2c_master_send return code misuse
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Trying to read data from accelerometer buffer
  • From: Ibrahim Mattus Neto <ibrahim.neto@xxxxxxxxx>
• Re: [PATCH 1/2] iio: gyro: check sscanf return value
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: si7020: Swap data byte order
  • From: Chris Lesiak <chris.lesiak@xxxxxxxxx>
• Re: [PATCH 2/2] iio: health: Add driver for the TI AFE4404 heart monitor
  • From: "Andrew F. Davis" <afd@xxxxxx>
• IIO device indexing issue
  • From: Vesa Jääskeläinen <dachaac@xxxxxxxxx>
• Re: [PATCH 1/2] Input: Add binding document for a generic ADC keypad
  • From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
• Re: [PATCH 0/2] iio: Heart Rate Monitors
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH 1/2] Documentation: afe4404: Add DT bindings for the AFE4404 heart monitor
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH v4] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH 2/2] iio: health: Add driver for the TI AFE4404 heart monitor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: gyro: check sscanf return value
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• Re: [PATCH] tools: iio: avoid returning error when channel does not have an offset
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• Re: [PATCH 0/2] iio: Heart Rate Monitors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: lidar: return -EIO on invalid signal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: avoid returning error when channel does not have an offset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: gyro: check sscanf return value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] Input: Add binding document for a generic ADC keypad
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 1/2] iio: gyro: check sscanf return value
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• [PATCH 0/2] iio: check return value of sscanf
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• [PATCH 2/2] iio: imu: check sscanf return value
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• Re: [PATCH] tools: iio: avoid returning error when channel does not have an offset
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• Re: [PATCH] iio: lidar: return -EIO on invalid signal
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH v4] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH] tools: iio: avoid returning error when channel does not have an offset
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• Re: [PATCH 1/2] Documentation: afe4404: Add DT bindings for the AFE4404 heart monitor
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v4] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCHv2 1/2] Documentation: ad5592r: Added devicetree bindings documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:dac: fix i2c_master_send return code misuse
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: generic_buffer.c bug
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] staging: iio: dummy: complete IIO events delivery to userspace
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Trying to read data from accelerometer buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/5] iio: humidity: si7020: add No Hold read mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] i2c: add i2c_check_quirks helper function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] tools: iio: avoid returning error when channel does not have an offset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: light: lm3533-als: Print error message on invalid resistance
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] iio: adc: Add TI ADS8688
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: added support for IIO_VAL_INT
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: vf610_adc: Fix division by zero error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: lidar: return -EIO on invalid signal
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 2/3] iio: light: lm3533-als: Print error message on invalid resistance
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• [PATCH v3 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] tools: iio: avoid returning error when channel does not have an offset
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• Re: [PATCH v3] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• [PATCH v5 5/5] iio: humidity: si7020: add No Hold read mode
  • From: Nicola Corna <nicola@xxxxxxxxxx>
• [PATCH v2 3/5] i2c: add I2C_AQ_NO_CLK_STRETCH to i2c-bcm2835.c
  • From: Nicola Corna <nicola@xxxxxxxxxx>
• [PATCH v2 2/5] i2c: add I2C_AQ_NO_CLK_STRETCH to i2c-algo-bit.c
  • From: Nicola Corna <nicola@xxxxxxxxxx>
• [PATCH 4/5] i2c: add i2c_check_quirks helper function
  • From: Nicola Corna <nicola@xxxxxxxxxx>
• [PATCH v2 1/5] i2c: add i2c quirk flag for unsupported clock stretching
  • From: Nicola Corna <nicola@xxxxxxxxxx>
• Trying to read data from accelerometer buffer
  • From: Ibrahim Mattus Neto <ibrahim.neto@xxxxxxxxx>
• Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 3/4] i2c: added I2C_AQ_NO_CLK_STRETCH to i2c-bcm2835.c
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] staging: iio: dummy: complete IIO events delivery to userspace
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] staging: iio: dummy: complete IIO events delivery to userspace
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] staging: iio: dummy: complete IIO events delivery to userspace
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode
  • From: "Nicola Corna" <nicola@xxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode
  • From: "Nicola Corna" <nicola@xxxxxxxxxx>
• Re: [PATCH 3/4] i2c: added I2C_AQ_NO_CLK_STRETCH to i2c-bcm2835.c
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode
  • From: "Nicola Corna" <nicola@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: light: lm3533-als: Print error message on invalid resistance
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: light: lm3533-als: Print error message on invalid resistance
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Remove .owner from spi_drivers
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: Duplicate htu21 drivers
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Duplicate htu21 drivers
  • From: Michal Marek <mmarek@xxxxxxx>
• Duplicate htu21 drivers
  • From: Michal Marek <mmarek@xxxxxxx>
• Re: [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] staging: iio: dummy: complete IIO events delivery to userspace
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v4 4/4] iio: humidity: si7020: added No Hold read mode
  • From: Nicola Corna <nicola@xxxxxxxxxx>
• Re: [PATCH v3 4/4] iio: humidity: si7020: added No Hold read mode
  • From: "Nicola Corna" <nicola@xxxxxxxxxx>
• generic_buffer.c bug
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH v3 4/4] iio: humidity: si7020: added No Hold read mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/4] i2c: added I2C_AQ_NO_CLK_STRETCH to i2c-bcm2835.c
  • From: Nicola Corna <nicola@xxxxxxxxxx>
• [PATCH 2/4] i2c: added I2C_AQ_NO_CLK_STRETCH to i2c-algo-bit.c
  • From: Nicola Corna <nicola@xxxxxxxxxx>
• [PATCH v3 4/4] iio: humidity: si7020: added No Hold read mode
  • From: Nicola Corna <nicola@xxxxxxxxxx>
• [PATCH 1/4] i2c: added i2c quirk flag for unsupported clock stretching
  • From: Nicola Corna <nicola@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: light: lm3533-als: Print error message on invalid resistance
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] staging: iio: dummy: complete IIO events delivery to userspace
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• Re: [PATCH] iio:dac: fix i2c_master_send return code misuse
  • From: Jean-François Dagenais <jeff.dagenais@xxxxxxxxx>
• [PATCH v2 2/3] iio: light: lm3533-als: Print error message on invalid resistance
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• [PATCH] iio:dac: fix i2c_master_send return code misuse
  • From: Jean-Francois Dagenais <jeff.dagenais@xxxxxxxxx>
• iio:dac: fix i2c_master_send return code misuse
  • From: Jean-Francois Dagenais <jeff.dagenais@xxxxxxxxx>
• Re: [PATCHv2 1/2] Documentation: ad5592r: Added devicetree bindings documentation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCHv2 1/2] Documentation: ad5592r: Added devicetree bindings documentation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] staging: iio: change IRQ_HANDLED to IRQ_WAKE_THREAD
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] staging: iio: change IRQ_HANDLED to IRQ_WAKE_THREAD
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH] staging: iio: change IRQ_HANDLED to IRQ_WAKE_THREAD
  • From: Ioana Ciornei <ciorneiioana@xxxxxxxxx>
• [PATCH v5 1/2] iio: adc: Add TI ADS8688
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• [PATCH v5 2/2] iio: ti-ads8688: Add DT binding documentation
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• [PATCH] iio: core: added support for IIO_VAL_INT
  • From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
• Re: [PATCH v10 5/5] iio: Documentation: Add IIO configfs documentation
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v2 1/1] iio: lidar: return -EINVAL on invalid signal
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH v2 0/1] iio: lidar: return -EINVAL on invalid signal
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH] staging: iio: dummy: clean up the define and usage of dummy_scan_elements
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: dummy: clean up the define and usage of dummy_scan_elements
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• Re: [PATCH] iio: adc: vf610_adc: Fix division by zero error
  • From: Stefan Agner <stefan@xxxxxxxx>
• Re: [PATCH] iio: adc: vf610_adc: Fix division by zero error
  • From: Duan Andy <fugang.duan@xxxxxxxxxxxxx>
• Re: Is IIO the appropriate subsystem for a thermal camera sensor?
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: Is IIO the appropriate subsystem for a thermal camera sensor?
  • From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxxx>
• Re: [PATCH] staging: iio: dummy: clean up the define and usage of dummy_scan_elements
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: Is IIO the appropriate subsystem for a thermal camera sensor?
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH] staging: iio: dummy: clean up the define and usage of dummy_scan_elements
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: dummy: clean up the define and usage of dummy_scan_elements
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• [PATCH] iio: lidar: return -EIO on invalid signal
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• [PATCH 2/3] iio: light: lm3533-als: Print error message on invalid resistance
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• [PATCH 1/3] devicetree: mfd: Add binding for the TI LM3533
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: Add a DMAengine framework based buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: Add generic DMA buffer infrastructure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/6] iio: Add buffer enable/disable callbacks
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: Add support for indicating fixed watermarks
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/6] iio:iio_buffer_init(): Only set watermark if not already set
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] iio: Set device watermark based on watermark of all attached buffers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:ad7793: Fix ad7785 product ID
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: cdc: Remove unused macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: adc: Add TI ADS8688
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv2 1/2] Documentation: ad5592r: Added devicetree bindings documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHv2 2/2] iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: mma8452: support either of the available interrupt pins
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: mcp320x: Add compatible with vendor prefix to OF table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: ad5064: Fix ad5629/ad5669 shift
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: vf610_adc: Fix division by zero error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] vf610_adc: Fix internal temperature calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio:adc:palmas: add DT support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: add support for Memsic MXC6255XC sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: add support for Memsic MXC6255XC sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio:ad5064: Add support for ltc2617 and similar devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio:ad5064: Structural changes to support LTC2617
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio:ad5064: Structural changes to support LTC2617
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] iio: mma8452: support either of the available interrupt pins
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Remove .owner from spi_drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: dummy: clean up the define and usage of dummy_scan_elements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [Outreachy kernel] [PATCH] staging: iio: dummy: clean up the define and usage of dummy_scan_elements
  • From: Greg KH <greg@xxxxxxxxx>
• Re: iio sensors, acceleration and gyro.
  • From: Mike Mestnik <cheako+wayland-devel@xxxxxxxxxxxxxxx>
• Re: [PATCH v10 2/5] iio: core: Introduce IIO configfs support
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH v9 4/5] iio: trigger: Introduce IIO hrtimer based trigger
  • From: Matt Ranostay <mranostay@xxxxxxxxx>
• Re: [PATCH 0/2] Remove .owner from spi_drivers
  • From: Sebastian Reichel <sre@xxxxxxxx>
• [PATCH] staging: iio: dummy: clean up the define and usage of dummy_scan_elements
  • From: Alison Schofield <amsfield22@xxxxxxxxx>
• [PATCH] iio: core: fix ptr_ret.cocci warnings
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v10 3/5] iio: core: Introduce IIO software triggers
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v10 0/5] Add initial configfs support for IIO
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v10 3/5] iio: core: Introduce IIO software triggers
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v10 2/5] iio: core: Introduce IIO configfs support
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v10 4/5] iio: trigger: Introduce IIO hrtimer based trigger
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v10 5/5] iio: Documentation: Add IIO configfs documentation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v10 1/5] configfs: Allow dynamic group creation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v9 1/5] configfs: Allow dynamic group creation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH 0/2] Remove .owner from spi_drivers
  • From: "Andrew F. Davis" <afd@xxxxxx>
• [PATCH 1/2] spi: Add THIS_MODULE to spi_driver in SPI core
  • From: "Andrew F. Davis" <afd@xxxxxx>
• Re: [PATCH v9 1/5] configfs: Allow dynamic group creation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v9 1/5] configfs: Allow dynamic group creation
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v9 1/5] configfs: Allow dynamic group creation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v9 2/5] iio: core: Introduce IIO configfs support
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v9 3/5] iio: core: Introduce IIO software triggers
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v9 4/5] iio: trigger: Introduce IIO hrtimer based trigger
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v9 5/5] iio: Documentation: Add IIO configfs documentation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v9 0/5] Add initial configfs support for IIO
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v4] iio: mma8452: support either of the available interrupt pins
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v4] iio: mma8452: support either of the available interrupt pins
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH v2] iio: accel: add support for Memsic MXC6255XC sensor
  • From: Teodora Baluta <teodora.baluta@xxxxxxxxx>
• Re: [PATCH v8 1/5] configfs: Allow dynamic group creation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v8 1/5] configfs: Allow dynamic group creation
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v3 2/2] iio:ad5064: Add support for ltc2617 and similar devices
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• [PATCH v3 1/2] iio:ad5064: Structural changes to support LTC2617
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• [PATCH v3 0/2] iio:ad5064: Add support for LTC2617
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• [PATCH v3] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: omap5-uevm: enable iio gpadc for Palmas
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: iio_interrupt_trigger
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: ADS1018 ADC driver
  • From: Michael Welling <mwelling@xxxxxxxx>
• Re: iio_interrupt_trigger
  • From: Matthias Meier <matthias.j.meier@xxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: omap5-uevm: enable iio gpadc for Palmas
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] ARM: dts: omap5-uevm: enable iio gpadc for Palmas
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: iio_interrupt_trigger
  • From: Matthias Meier <matthias.j.meier@xxxxxxx>
• Re: [PATCH v8 2/5] iio: core: Introduce IIO configfs support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v8 5/5] iio: Documentation: Add IIO configfs documentation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v8 3/5] iio: core: Introduce IIO software triggers
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [RFC PATCH] iio: core: iio_triggers_group_type can be static
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH v8 5/5] iio: Documentation: Add IIO configfs documentation
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH v2] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v4] iio: mma8452: support either of the available interrupt pins
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH v2] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH v2] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• [PATCH v8 0/5] Add initial configfs support for IIO
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v8 2/5] iio: core: Introduce IIO configfs support
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v8 1/5] configfs: Allow dynamic group creation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v8 4/5] iio: trigger: Introduce IIO hrtimer based trigger
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v8 5/5] iio: Documentation: Add IIO configfs documentation
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v8 3/5] iio: core: Introduce IIO software triggers
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v2] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: iio:ad5064: Add support for LTC2617
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH] adc: correctly check return value
  • From: Hartmut Knaack <knaack.h@xxxxxx>
• [PATCH v2] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• [PATCH] adc: correctly check return value
  • From: Insu Yun <wuninsu@xxxxxxxxx>
• [PATCH v2] vf610_adc: Fix internal temperature calculation
  • From: Bhuvanchandra DV <bhuvanchandra.dv@xxxxxxxxxxx>
• Re: [PATCH] iio: accel: add support for Memsic MXC6255XC sensor
  • From: Teodora Baluta <teodora.baluta@xxxxxxxxx>
• Re: [PATCH] iio: accel: add support for Memsic MXC6255XC sensor
  • From: Teodora Baluta <teodora.baluta@xxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio:adc:palmas: add DT support
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio:adc:palmas: add DT support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: iio:ad5064: Add support for LTC2617
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH] iio: accel: add support for Memsic MXC6255XC sensor
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: [PATCH] iio: accel: add support for Memsic MXC6255XC sensor
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: iio_interrupt_trigger
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH] iio: adc: vf610_adc: Fix division by zero error
  • From: Sanchayan Maity <maitysanchayan@xxxxxxxxx>
• iio_interrupt_trigger
  • From: Matthias Meier <matthias.j.meier@xxxxxxx>
• [PATCH] iio: accel: add Freescale MMA7455L 3-axis accelerometer driver
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• [PATCH] iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: iio: inv_mpu6050: client: Erratic data.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio: inv_mpu6050: client: Erratic data.
  • From: Mike Mestnik <cheako@xxxxxxxxxxxxxxx>
• Re: [PULL] 2nd set of IIO new drivers, functionality and cleanups for the 4.4 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: iio: inv_mpu6050: client: Erratic data.
  • From: Mike Mestnik <cheako@xxxxxxxxxxxxxxx>
• Re: [PULL] IIO fixes for 4.3 - set 1.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 3/3] ARM: dts: omap5-uevm: enable iio gpadc for Palmas
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 2/3] iio:adc:palmas: add DT support
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v3 0/3] Add Palmas iio gpadc
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] iio: accel: add support for Memsic MXC6255XC sensor
  • From: Teodora Baluta <teodora.baluta@xxxxxxxxx>
• Re: iio: inv_mpu6050: client: Erratic data.
  • From: Mike Mestnik <cheako@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: humidity: si7020: added No Hold read mode
  • From: "Nicola Corna" <nicola@xxxxxxxxxx>
• [PATCH v4] iio: mma8452: support either of the available interrupt pins
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH v2 2/2] iio:ad5064: Fix power down operation with LTC2617
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• iio:ad5064: Add support for LTC2617
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• [PATCH v2 1/2] iio:ad5064: Add support for ltc2617 and similar devices
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• Re: iio:ad5064: Add support for LTC2617
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH 2/2] iio:ad5064: Fix power down operation with LTC2617
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: [PATCH v3] iio: mma8452: support either of the available interrupt pins
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v3] iio: mma8452: support either of the available interrupt pins
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH v3] iio: mma8452: support either of the available interrupt pins
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH 2/2] iio:ad5064: Fix power down operation with LTC2617
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• [PATCH 1/2] iio:ad5064: Add support for ltc2617 and similar devices
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• iio:ad5064: Add support for LTC2617
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• Re: iio: inv_mpu6050: client: Erratic data.
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• iio: inv_mpu6050: client: Erratic data.
  • From: Mike Mestnik <cheako@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: mcp320x: Add compatible with vendor prefix to OF table
  • From: Michael Welling <mwelling@xxxxxxxx>
• Re: [PATCH v2 3/6] iio: Add support for indicating fixed watermarks
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: [PATCH v2 3/6] iio: Add support for indicating fixed watermarks
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] iio: mma8452: support either of the available interrupt pins
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 3/6] iio: Add support for indicating fixed watermarks
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v3] iio: mma8452: support either of the available interrupt pins
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH 0/2] iio: adc: mcp320x: Add compatible with vendor prefix and deprecate old ones
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: mcp320x: Add compatible with vendor prefix to OF table
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: mma8452: support either of the available interrupt pins
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: Industrial I/O presentation at LinuxCon Europe
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH v2] iio: mma8452: support either of the available interrupt pins
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH] iio: mma8452: support either of the available interrupt pins
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 1/2] iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 2/2] iio: ad5064: Fix ad5629/ad5669 shift
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/2] iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3 6/6] iio: Add a DMAengine framework based buffer
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3 1/6] iio: Set device watermark based on watermark of all attached buffers
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3 0/6] iio: Add DMA buffer support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3 5/6] iio: Add generic DMA buffer infrastructure
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3 3/6] iio: Add support for indicating fixed watermarks
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3 4/6] iio: Add buffer enable/disable callbacks
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3 2/6] iio:iio_buffer_init(): Only set watermark if not already set
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 6/6] iio: Add a DMAengine framework based buffer
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 5/6] iio: Add generic DMA buffer infrastructure
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 4/6] iio: Add buffer enable/disable callbacks
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 3/6] iio: Add support for indicating fixed watermarks
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 2/6] iio:iio_buffer_init(): Only set watermark if not already set
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 1/6] iio: Set device watermark based on watermark of all attached buffers
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 0/6] iio: Add DMA buffer support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: mma8452: support either of the available interrupt pins
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCHv2 1/3] Documentation: ad5064: Added devicetree bindings documentation
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: Move IIO Dummy Driver out of staging
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: Add support for LTC26xx I2C DAC
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCHv2 1/2] Documentation: ad5592r: Added devicetree bindings documentation
  • From: Paul Cercueil <paul.cercueil@xxxxxxxxxx>
• Re: [PATCH] iio: Add support for LTC26xx I2C DAC
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: adc: Add TI ADS8688
  • From: Sean Nyekjær <sean.nyekjaer@xxxxxxxxx>
• [PATCHv2 2/2] iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs
  • From: Paul Cercueil <paul.cercueil@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] iio: Add support for LTC26xx I2C DAC
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• Re: [PATCH] iio: Move IIO Dummy Driver out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] vf610_adc: Fix internal temperature calculation
  • From: Bhuvanchandra <bhuvanchandra.dv@xxxxxxxxxxx>
• Re: [PATCH] iio: Move IIO Dummy Driver out of staging
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• Re: hello
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 2nd set of IIO new drivers, functionality and cleanups for the 4.4 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Add support for LTC26xx I2C DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:measurement specialties core: Fix endian sparse warnings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:light:apds9960 Fix sparse endian warnings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:measurement specialties core: Fix endian sparse warnings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCHv2 1/3] Documentation: ad5064: Added devicetree bindings documentation
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] iio: Add support for LTC26xx I2C DAC
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio:ad7793: Fix ad7785 product ID
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: Add support for LTC26xx I2C DAC
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• [PATCHv2 3/3] iio: ad5064: Always use external vref if there is no internal vref
  • From: Paul Cercueil <paul.cercueil@xxxxxxxxxx>
• [PATCHv2 2/3] iio: ad5064: Explicitly configure whether to use external supply
  • From: Paul Cercueil <paul.cercueil@xxxxxxxxxx>
• [PATCHv2 1/3] Documentation: ad5064: Added devicetree bindings documentation
  • From: Paul Cercueil <paul.cercueil@xxxxxxxxxx>
• Re: [PATCH] iio: Add support for LTC26xx I2C DAC
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: Add support for LTC26xx I2C DAC
  • From: Peter Meerwald <pmeerw@xxxxxxxxxx>
• Re: [PATCH] iio:measurement specialties core: Fix endian sparse warnings.
  • From: "ludovic.tancerel@xxxxxxxxxxxxxxxxx" <ludovic.tancerel@xxxxxxxxxxxxxxxxx>
• [PATCH] iio: Add support for LTC26xx I2C DAC
  • From: Marc Andre <marc.andre@xxxxxxxxxx>
• [PULL] IIO fixes for 4.3 - set 1.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/2] iio: adc: Add TI ADS8688
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/6] iio:dac:m62332: use dynamic scale
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/6] iio:dac:m62332: address some style issues
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] iio:dac:m62332: drop unrequired variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/6] iio:dac:m62332: use ARRAY_SIZE
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] iio:dac:m62332: shutdown on remove
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] iio:dac:m62332: share scale and offset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/6] fixes, cleanup and improvements for m62332
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: cdc: Remove unused macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Hello
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] vf610_adc: Fix internal temperature calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] vf610_adc: Fix internal temperature calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: mxs-lradc: Fix temperature offset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: add IMX7D ADC driver support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] Documentation: add the binding file for Freescale imx7d ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] Documentation: add the binding file for Freescale imx7d ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:measurement specialties core: Fix endian sparse warnings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hdc100x: correct IIO_CHAN_INFO_OFFSET value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: mxs-lradc: Fix temperature offset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: User-space API again, detecting devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:measurement specialties core: Fix endian sparse warnings.
  • From: "ludovic.tancerel@xxxxxxxxxxxxxxxxx" <ludovic.tancerel@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio:measurement specialties core: Fix endian sparse warnings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio:measurement specialties core: Fix endian sparse warnings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: bmc150: Fix type of step transfer variable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Industrial I/O presentation at LinuxCon Europe
  • From: Hartmut Knaack <knaack.h@xxxxxx>
• User-space API again, detecting devices
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH 2/5] Documentation: add the binding file for Freescale imx7d ADC driver
  • From: Rob Herring <robh@xxxxxxxxxx>