These two spi_w8r8() calls return a value with is used by the code
following the error check. The dubious use was caused by a cleanup
patch.
Fixes: d34dbee8ac8e ("staging:iio:accel:kxsd9 cleanup and conversion to iio_chan_spec.")
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
Jonathan: I suspect the driver was never tested after the cleanup?
I'm trying to use the driver to bolt on I2C support, but I'm a bit
suspicious that it's not really working for SPI even.
---
drivers/iio/accel/kxsd9.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
index 923f56598d4b..3a9f106787d2 100644
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -81,7 +81,7 @@ static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro)
mutex_lock(&st->buf_lock);
ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
- if (ret)
+ if (ret < 0)
goto error_ret;
st->tx[0] = KXSD9_WRITE(KXSD9_REG_CTRL_C);
st->tx[1] = (ret & ~KXSD9_FS_MASK) | i;
@@ -163,7 +163,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
break;
case IIO_CHAN_INFO_SCALE:
ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
- if (ret)
+ if (ret < 0)
goto error_ret;
*val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK];
ret = IIO_VAL_INT_PLUS_MICRO;
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
