IS_ERR_OR_NULL() should never be used with regulators because
a NULL pointer may be a perfectly valid dummy regulator
We should always succeed to fetch and enable a regulator, but
it may be a dummy. That is fine, so bail out for any real
errors or probe deferrals
Include the error code in the warning print so we know what
kind of problem we're dealing with (for example it is nice to
see if it is a probe deferral).
As we will bail out of probe if the regulator is erroneous,
just issue regulator_disable() on the poweroff path: it will
succeed.
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: Lars-Peter Clausen Lars-Peter Clausen <lars@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/iio/magnetometer/ak8975.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index 609a2c401b5d..bc0770205b2d 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -389,17 +389,17 @@ static int ak8975_power_on(struct i2c_client *client)
int ret;
data->vdd = devm_regulator_get(&client->dev, "vdd");
- if (IS_ERR_OR_NULL(data->vdd)) {
+ if (IS_ERR(data->vdd)) {
ret = PTR_ERR(data->vdd);
- if (ret == -ENODEV)
- ret = 0;
} else {
ret = regulator_enable(data->vdd);
}
+ if (ret) {
+ dev_warn(&client->dev,
+ "Failed to enable specified Vdd supply\n");
+ return ret;
+ }
- if (ret)
- dev_err(&client->dev, "failed to enable Vdd supply: %d\n", ret);
- return ret;
}
/* Disable attached power regulator if any. */
@@ -408,8 +408,7 @@ static void ak8975_power_off(const struct i2c_client *client)
const struct iio_dev *indio_dev = i2c_get_clientdata(client);
const struct ak8975_data *data = iio_priv(indio_dev);
- if (!IS_ERR_OR_NULL(data->vdd))
- regulator_disable(data->vdd);
+ regulator_disable(data->vdd);
}
/*
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
