This adds device tree support to the BMP085, BMP180 and BMP280
pressure sensors. Tested on the Qualcomm APQ8060 Dragonboard:
iio:device1$ cat in_temp_input
26700
iio:device1$ cat in_pressure_input
99.185000000
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v2->v3:
- Terminate OF ID table properly with an { }
ChangeLog v1->v2:
- Fix some BMP085 misspelled as BMP058 errors.
- Add the new BME280 sensor as well
---
drivers/iio/pressure/bmp280.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c
index 1876b50cc84a..fa76f5851245 100644
--- a/drivers/iio/pressure/bmp280.c
+++ b/drivers/iio/pressure/bmp280.c
@@ -18,6 +18,7 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/acpi.h>
+#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
@@ -1094,6 +1095,19 @@ static const struct acpi_device_id bmp280_acpi_match[] = {
};
MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match);
+#ifdef CONFIG_OF
+static const struct of_device_id bmp280_of_match[] = {
+ { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID },
+ { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID },
+ { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID },
+ { .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bmp280_of_match);
+#else
+#define bmp280_of_match NULL
+#endif
+
static const struct i2c_device_id bmp280_id[] = {
{"bmp280", BMP280_CHIP_ID },
{"bmp180", BMP180_CHIP_ID },
@@ -1107,6 +1121,7 @@ static struct i2c_driver bmp280_driver = {
.driver = {
.name = "bmp280",
.acpi_match_table = ACPI_PTR(bmp280_acpi_match),
+ .of_match_table = of_match_ptr(bmp280_of_match),
},
.probe = bmp280_probe,
.id_table = bmp280_id,
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
