Changes in this version:
- Build robot is happy, also with allmodconfig
- Added some collected ACKs and Tested-by's
- Fixed all review comments
- Added runtime PM on top: after fixing the review comments for
the regulators it was such a tempting move that I couldn't
resist
Jonathan: if you want to keep the old DT binding patch you can
drop patch 1 or ask me to provide a patch patching the patch, it
adds the new BME280 as well.
Linus Walleij (10):
iio: pressure: bmp280: augment DT bindings
iio: pressure: bmp280: support device tree initialization
iio: pressure: bmp280: add reset GPIO line handling
iio: pressure: bmp280: support supply regulators
iio: pressure: bmp280: split driver in logical parts
iio: pressure: bmp280: split off an I2C Kconfig entry
iio: pressure: bmp280: add SPI interface driver
iio: pressure: bmp280: add support for BMP085 EOC interrupt
iio: pressure: bmp280: read calibration data once
iio: pressure: bmp280: add power management
.../devicetree/bindings/iio/pressure/bmp085.txt | 15 +-
drivers/iio/pressure/Kconfig | 28 +-
drivers/iio/pressure/Makefile | 3 +
drivers/iio/pressure/{bmp280.c => bmp280-core.c} | 578 ++++++++++-----------
drivers/iio/pressure/bmp280-i2c.c | 91 ++++
drivers/iio/pressure/bmp280-regmap.c | 84 +++
drivers/iio/pressure/bmp280-spi.c | 125 +++++
drivers/iio/pressure/bmp280.h | 112 ++++
8 files changed, 737 insertions(+), 299 deletions(-)
rename drivers/iio/pressure/{bmp280.c => bmp280-core.c} (72%)
create mode 100644 drivers/iio/pressure/bmp280-i2c.c
create mode 100644 drivers/iio/pressure/bmp280-regmap.c
create mode 100644 drivers/iio/pressure/bmp280-spi.c
create mode 100644 drivers/iio/pressure/bmp280.h
--
2.4.11
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
