Hi Rob,
Please find my reply inline.
Regards,
Raveendra
On Mon, Jun 20, 2016 at 11:34 PM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Sun, Jun 19, 2016 at 03:36:28PM +0530, Raveendra Padasalagi wrote:
>> The patch adds devicetree binding document for broadcom's
>> iproc-static-adc controller driver.
>>
>> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
>> Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
>> Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
>> ---
>> .../bindings/iio/adc/brcm,iproc-static-adc.txt | 43 ++++++++++++++++++++++
>> 1 file changed, 43 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
>> new file mode 100644
>> index 0000000..1de0dfa
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
>> @@ -0,0 +1,43 @@
>> +* Broadcom's IPROC Static ADC controller
>> +
>> +Required properties:
>> +
>> +- compatible: Must be "brcm,iproc-static-adc"
>> +
>
>> +- #address-cells: Specify the number of u32 entries needed in child nodes.
>> + Should set to 1.
>> +
>> +- #size-cells: Specify number of u32 entries needed to specify child nodes size
>> + in reg property. Should set to 1.
>
> Why are these needed? What child nodes can you have?
Yes, these are not needed. ADC can't have any child nodes.
I will fix it in the next patch. Thanks.
>> +
>> +- adc-syscon: Handler of syscon node defining physical base address of the
>> + controller and length of memory mapped region.
>> +
>> +- #io-channel-cells = <1>; As ADC has multiple outputs
>> + refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
>> +
>> +- clocks: Clock used for this block.
>> +
>> +- clock-names: Clock name should be given as tsc_clk.
>> +
>> +- interrupts: interrupt line number.
>> +
>> +For example:
>> +
>> + ts_adc_syscon: ts_adc_syscon@180a6000 {
>> + compatible = "brcm,iproc-ts-adc-syscon","syscon";
>> + reg = <0x180a6000 0xc30>;
>> + };
>> +
>> + adc: adc@180a6000 {
>> + compatible = "brcm,iproc-static-adc";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + adc-syscon = <&ts_adc_syscon>;
>> + #io-channel-cells = <1>;
>> + io-channel-ranges;
>> + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
>> + clock-names = "tsc_clk";
>> + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> --
>> 1.9.1
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
