The datasheet actually specifies that we need to wait atleast 500us after powering on the device before trying to set mode. Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- ChangeLog v1->v2: - No changes. --- drivers/iio/magnetometer/ak8975.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index 378bafb9eb88..2fcd52a49759 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -399,6 +399,12 @@ static int ak8975_power_on(const struct ak8975_data *data) "Failed to enable specified Vid supply\n"); return ret; } + /* + * According to the datasheet the power supply rise time i 200us + * and the minimum wait time before mode setting is 100us, in + * total 300 us. Add some margin and say minimum 500us here. + */ + usleep_range(500, 1000); return 0; } -- 2.4.11 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
