Didn't notice that will till now, and looking at the timestamp I see why :). However this is more for the sw triggered buffer support which hwmon lacks... there is a few examples of this already in the tree. Maybe Jonathan and Peter will have some input on this. On Mon, Jun 13, 2016 at 3:25 PM, Alison Schofield <amsfield22@xxxxxxxxx> wrote: > On Sat, Jun 11, 2016 at 10:13:15PM -0700, Matt Ranostay wrote: >> Add support for the humidity and temperature functionally for the SHT31 >> chipset. In addition add support for using using software triggers. > > Now that I'm hwmon-aware ;) I see this same driver under review in hwmon. > Can support exist in 2 places? > > alisons > >> >> Matt Ranostay (2): >> devicetree: add Sensirion AG vendor id >> iio: humidity: sht31: add Sensirion SHT31 support >> >> .../devicetree/bindings/i2c/trivial-devices.txt | 1 + >> .../devicetree/bindings/vendor-prefixes.txt | 1 + >> drivers/iio/humidity/Kconfig | 11 + >> drivers/iio/humidity/Makefile | 1 + >> drivers/iio/humidity/sht31.c | 416 +++++++++++++++++++++ >> 5 files changed, 430 insertions(+) >> create mode 100644 drivers/iio/humidity/sht31.c >> >> -- >> 2.7.4 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-iio" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
