On Sun, Jun 26, 2016 at 3:54 PM, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> On 24/06/16 16:43, Rob Herring wrote:
>> On Wed, Jun 22, 2016 at 11:41:51AM +0530, Raveendra Padasalagi wrote:
>>> The patch adds devicetree binding document for broadcom's
>>> iproc-static-adc controller driver.
>>>
>>> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx>
>>> Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
>>> Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
>>> ---
>>> .../bindings/iio/adc/brcm,iproc-static-adc.txt | 38 ++++++++++++++++++++++
>>> 1 file changed, 38 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
>>> new file mode 100644
>>> index 0000000..a82076e
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
>>> @@ -0,0 +1,38 @@
>>> +* Broadcom's IPROC Static ADC controller
>>> +
>>> +Broadcom iProc ADC controller has 8 channels 10bit ADC.
>>> +Allows user to convert analog input voltage values to digital.
>>> +
>>> +Required properties:
>>> +
>>> +- compatible: Must be "brcm,iproc-static-adc"
>>> +
>>> +- adc-syscon: Handler of syscon node defining physical base address of the
>>> + controller and length of memory mapped region.
>>> +
>>> +- #io-channel-cells = <1>; As ADC has multiple outputs
>>> + refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
>>> +
>>> +- clocks: Clock used for this block.
>>> +
>>> +- clock-names: Clock name should be given as tsc_clk.
>>> +
>>> +- interrupts: interrupt line number.
>>> +
>>> +For example:
>>> +
>>> + ts_adc_syscon: ts_adc_syscon@180a6000 {
>>> + compatible = "brcm,iproc-ts-adc-syscon","syscon";
>>> + reg = <0x180a6000 0xc30>;
>>> + };
>>> +
>>> + adc: adc@180a6000 {
>>> + compatible = "brcm,iproc-static-adc";
>>> + adc-syscon = <&ts_adc_syscon>;
>>> + #io-channel-cells = <1>;
>>> + io-channel-ranges;
>>
>> Not documented.
> Core iio docs, but obviously a cross reference would be good.
Yes, Will provide the cross reference to core iio docs in the next patch.
Thanks.
>>
>>> + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
>>> + clock-names = "tsc_clk";
>>> + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
>>> + status = "disabled";
>>> + };
>>> --
>>> 1.9.1
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
