Linux IDE Archive
[Prev Page][Next Page]
- [PATCH 01/15] dmaengine: pxa: use a dma slave map
- [PATCH 03/15] mmc: pxamci: remove the dmaengine compat need
- [PATCH 04/15] media: pxa_camera: remove the dmaengine compat need
- [PATCH 06/15] net: smc911x: remove the dmaengine compat need
- [PATCH 08/15] ASoC: pxa: remove the dmaengine compat need
- [PATCH 07/15] net: smc91x: remove the dmaengine compat need
- [PATCH 11/15] dmaengine: pxa: document pxad_param
- [PATCH 12/15] dmaengine: pxa: make the filter function internal
- [PATCH 15/15] ARM: pxa: change SSP DMA channels allocation
- [PATCH 13/15] ARM: pxa: remove the DMA IO resources
- [PATCH 14/15] ARM: pxa: change SSP devices allocation
- [PATCH 09/15] net: irda: pxaficp_ir: remove the dmaengine compat need
- [PATCH 10/15] ata: pata_pxa: remove the dmaengine compat need
- Re: 4.16-rc2+git: pata_serverworks: hanging ata detection thread on HP DL380G3
- Re: [PATCH v2] ahci: imx: add the imx8qm ahci sata support
- Re: [PATCH v2] ahci: imx: add the imx8qm ahci sata support
- Re: v4.15 intermittent errors on suspend/resume
- v4.15 intermittent errors on suspend/resume
- Re: 4.16-rc2+git: pata_serverworks: hanging ata detection thread on HP DL380G3
- Re: 4.16-rc2+git: pata_serverworks: hanging ata detection thread on HP DL380G3
- From: Bartlomiej Zolnierkiewicz
- Re: 4.16-rc2+git: pata_serverworks: hanging ata detection thread on HP DL380G3
- [PATCH v2] ahci: imx: add the imx8qm ahci sata support
- RE: [PATCH v1] ahci: imx: add the imx8qm ahci sata support
- Re: [PATCH v2] ata: ahci-platform: add reset control support
- Re: [PATCH v2] ata: ahci-platform: add reset control support
- Re: [PATCH v2] ata: ahci-platform: add reset control support
- Re: [PATCH][next] libata: ensure host is free'd on error exit paths
- Re: [PATCH v1] ahci: imx: add the imx8qm ahci sata support
- [PATCH][next] libata: ensure host is free'd on error exit paths
- How to improve start-up time
- [RESEND PATCH v2] ata: ahci-platform: add reset control support
- Re: [PATCH v2] ata: ahci-platform: add reset control support
- [PATCH v2] ata: ahci-platform: add reset control support
- [PATCH v1] ahci: imx: add the imx8qm ahci sata support
- [PATCH] ahci: imx: add the imx8qm ahci sata support
- RE: [RFC] ahci: imx: add the imx8qm ahci sata support
- Re: [PATCH] ata: ahci-platform: add reset control support
- Re: [RFC] ahci: imx: add the imx8qm ahci sata support
- Re: [PATCH v3] ata: add Amiga Gayle PATA controller driver
- From: Philippe Ombredanne
- Re: [PATCH] ata: ahci-platform: add reset control support
- [PATCH] ata: ahci-platform: add reset control support
- Re: [PATCH v1] ahci: imx: fix the build warning
- [RFC] ahci: imx: add the imx8qm ahci sata support
- [PATCH v1] ahci: imx: fix the build warning
- RE: [RFC] ahci: imx: fix the build warning
- Re: [RFC] ahci: imx: fix the build warning
- Re: [PATCH 00/16] remove eight obsolete architectures
- [RFC] ahci: imx: fix the build warning
- RE: [tj-libata:for-4.17 28/29] drivers/ata/ahci_imx.c:478:2: warning: enumeration value 'AHCI_IMX53' not handled in switch
- Re: [PATCH 11/16] treewide: simplify Kconfig dependencies for removed archs
- [GIT PULL] libata fixes for v4.16-rc6
- Re: [tj-libata:for-4.17 28/29] drivers/ata/ahci_imx.c:478:2: warning: enumeration value 'AHCI_IMX53' not handled in switch
- [tj-libata:for-4.17 28/29] drivers/ata/ahci_imx.c:478:2: warning: enumeration value 'AHCI_IMX53' not handled in switch
- Re: [PATCH 1/3] libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
- [PATCH 2/3] libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
- [PATCH 1/3] libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
- [PATCH 3/3] libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
- Re: [PATCH v3] ata: add Amiga Gayle PATA controller driver
- Re: [PATCH v3] ata: add Amiga Gayle PATA controller driver
- Re: [RFC] ahci: imx: add the imx6qp ahci sata support
- RE: [PATCH v2 10/21] lightnvm: Remove depends on HAS_DMA in case of platform dependency
- From: Madalin-cristian Bucur
- [RFC] ahci: imx: add the imx6qp ahci sata support
- Re: [PATCH v2 10/21] lightnvm: Remove depends on HAS_DMA in case of platform dependency
- Re: [PATCH V8 1/9] dt-bindings: Tegra210: add binding documentation
- Re: [PATCH v3] ata: add Amiga Gayle PATA controller driver
- From: Philippe Ombredanne
- Re: [PATCH] libata: blacklist Micron 500IT SSD with MU01 firmware
- Re: [PATCH] libata: blacklist Micron 500IT SSD with MU01 firmware
- [PATCH v3] ata: add Amiga Gayle PATA controller driver
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] libata: blacklist Micron 500IT SSD with MU01 firmware
- [PATCH v2 04/21] fbdev: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 01/21] ASoC: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 16/21] remoteproc: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 03/21] crypto: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 00/21] Allow compile-testing NO_DMA (drivers)
- [PATCH v2 10/21] lightnvm: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 08/21] iio: adc: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 07/21] i2c: Remove depends on HAS_DMA in case of platform dependency
- Re: [PATCH v2 17/21] scsi: hisi_sas: Remove depends on HAS_DMA in case of platform dependency
- [PATCH] libata: blacklist Micron 500IT SSD with MU01 firmware
- [PATCH v2 09/21] iommu: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 05/21] firewire: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 12/21] media: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 19/21] spi: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 18/21] serial: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 13/21] mmc: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 20/21] staging: vc04_services: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 02/21] ata: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 21/21] usb: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 15/21] net: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 14/21] mtd: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 11/21] mailbox: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 17/21] scsi: hisi_sas: Remove depends on HAS_DMA in case of platform dependency
- [PATCH v2 06/21] fpga: Remove depends on HAS_DMA in case of platform dependency
- Re: [PATCH 00/16] remove eight obsolete architectures
- Re: rfc: remove print_vma_addr ? (was Re: [PATCH 00/16] remove eight obsolete architectures)
- Re: rfc: remove print_vma_addr ? (was Re: [PATCH 00/16] remove eight obsolete architectures)
- rfc: remove print_vma_addr ? (was Re: [PATCH 00/16] remove eight obsolete architectures)
- Re: [PATCH 00/16] remove eight obsolete architectures
- Re: [PATCH 11/16] treewide: simplify Kconfig dependencies for removed archs
- Re: [PATCH 00/16] remove eight obsolete architectures
- Re: [PATCH 00/16] remove eight obsolete architectures
- Re: [PATCH 00/16] remove eight obsolete architectures
- Re: [PATCH 00/16] remove eight obsolete architectures
- Re: [PATCH 00/16] remove eight obsolete architectures
- Re: [PATCH 00/47] arch-removal: device drivers
- Re: [PATCH V8 0/9] Refactor and add AHCI support for Tegra210
- Re: [PATCH 26/47] ata: remove bf54x driver
- [PATCH 26/47] ata: remove bf54x driver
- [PATCH 00/47] arch-removal: device drivers
- Re: [PATCH V8 0/9] Refactor and add AHCI support for Tegra210
- [PATCH 11/16] treewide: simplify Kconfig dependencies for removed archs
- [PATCH 00/16] remove eight obsolete architectures
- Help System Email Access
- Re: [PATCH V8 0/9] Refactor and add AHCI support for Tegra210
- Re: [PATCH V8 0/9] Refactor and add AHCI support for Tegra210
- Re: [PATCH V8 0/9] Refactor and add AHCI support for Tegra210
- Re: [PATCH] libata: add refcounting to ata_host
- Re: [PATCH] libata: Enable queued TRIM for Samsung SSD 860
- Re: 4.15.8 Kernel - Strange linux-raid behavior, not sure where to send it.
- Re: 4.15.8 Kernel - Strange linux-raid behavior, not sure where to send it.
- Re: 4.15.8 Kernel - Strange linux-raid behavior, not sure where to send it.
- Re: [PATCH] libata: Enable queued TRIM for Samsung SSD 860
- Re: [PATCH V8 9/9] ata: change Tegra124 to Tegra
- Re: [PATCH V8 8/9] ata: ahci_tegra: Add AHCI support for Tegra210
- Re: [PATCH V8 7/9] ata: ahci_tegra: disable DIPM
- Re: [PATCH V8 6/9] ata: ahci_tegra: disable devslp for Tegra124
- Re: [PATCH V8 5/9] ata: ahci_tegra: initialize regulators from soc struct
- Re: [PATCH V8 4/9] ata: ahci_tegra: Update initialization sequence
- Re: [PATCH V8 1/9] dt-bindings: Tegra210: add binding documentation
- [PATCH V8 9/9] ata: change Tegra124 to Tegra
- From: Preetham Chandru Ramchandra
- [PATCH V8 8/9] ata: ahci_tegra: Add AHCI support for Tegra210
- From: Preetham Chandru Ramchandra
- [PATCH V8 7/9] ata: ahci_tegra: disable DIPM
- From: Preetham Chandru Ramchandra
- [PATCH V8 6/9] ata: ahci_tegra: disable devslp for Tegra124
- From: Preetham Chandru Ramchandra
- [PATCH V8 5/9] ata: ahci_tegra: initialize regulators from soc struct
- From: Preetham Chandru Ramchandra
- [PATCH V8 4/9] ata: ahci_tegra: Update initialization sequence
- From: Preetham Chandru Ramchandra
- [PATCH V8 3/9] arm64: tegra: Enable AHCI on Jetson TX1
- From: Preetham Chandru Ramchandra
- [PATCH V8 2/9] arm64: tegra: Add SATA node for Tegra210
- From: Preetham Chandru Ramchandra
- [PATCH V8 1/9] dt-bindings: Tegra210: add binding documentation
- From: Preetham Chandru Ramchandra
- [PATCH V8 0/9] Refactor and add AHCI support for Tegra210
- From: Preetham Chandru Ramchandra
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- [PATCH] libata: Enable queued TRIM for Samsung SSD 860
- [PATCH] libata: add refcounting to ata_host
- [Bug 198999] kernel panic when booting when "CONFIG_DEBUG_SG=y" is set in config
- [Bug 198999] New: kernel panic when booting when "CONFIG_DEBUG_SG=y" is set in config
- Re: [PATCH 0/2] ahci/pci-quirks: Add PCI-id for the Highpoint Rocketraid 644L card
- Re: [PATCH 0/2] ahci/pci-quirks: Add PCI-id for the Highpoint Rocketraid 644L card
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- [PATCH 2/2] PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
- [PATCH 1/2] ahci: Add PCI-id for the Highpoint Rocketraid 644L card
- [PATCH 0/2] ahci/pci-quirks: Add PCI-id for the Highpoint Rocketraid 644L card
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- Re: [PATCH] pata_bk3710: clarify license version and use SPDX header
- Re: [PATCH] pata_falcon: clarify license version and use SPDX header
- Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
- Re: [PATCH v2] ata: do not schedule hot plug if it is a sas host
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- Re: [PATCH v2] ata: add Amiga Gayle PATA controller driver
- Re: [PATCH v2] ata: add Amiga Gayle PATA controller driver
- Re: [PATCH] pata_bk3710: clarify license version and use SPDX header
- Re: [PATCH] pata_falcon: clarify license version and use SPDX header
- [PATCH] pata_bk3710: clarify license version and use SPDX header
- From: Bartlomiej Zolnierkiewicz
- [PATCH] pata_falcon: clarify license version and use SPDX header
- From: Bartlomiej Zolnierkiewicz
- [PATCH v2] ata: add Amiga Gayle PATA controller driver
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ata: add Amiga Gayle PATA controller driver
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ata: add Amiga Gayle PATA controller driver
- From: John Paul Adrian Glaubitz
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
- [PATCH v2] ata: do not schedule hot plug if it is a sas host
- Re: [PATCH] ata: do not schedule hot plug if it is a sas host
- Re: [PATCH] ata: do not schedule hot plug if it is a sas host
- Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- Re: [PATCH] leds: Extends disk trigger for reads and writes
- RE: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
- RE: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
- RE: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
- RE: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
- [PATCH] ata: do not schedule hot plug if it is a sas host
- Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
- 4.16-rc2+git: pata_serverworks: hanging ata detection thread on HP DL380G3
- [PATCH] leds: Extends disk trigger for reads and writes
- [PATCH] ata: Prevent null dereference in ata_host_alloc_pinfo
- Re: [PATCH v2] libata: disable LPM for Crucial BX100 SSD 500GB drive
- Re: [PATCH V7 3/7] ata: ahci_tegra: Update initialization sequence
- Re: [PATCH V7 7/7] ata: ahci_tegra: Add AHCI support for Tegra210
- Re: [PATCH V7 6/7] ata: ahci_tegra: disable DIPM
- Re: [PATCH V7 5/7] ata: ahci_tegra: disable devslp for t124
- Re: [PATCH V7 4/7] ata: ahci_tegra: initialize regulators from soc_data
- Re: [PATCH V7 3/7] ata: ahci_tegra: Update initialization sequence
- Re: [PATCH V7 2/7] arm64: tegra: Enable AHCI on Jetson TX1
- Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
- Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
- Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
- Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
- Re: [PATCH 1/3] pata_arasan_cf: Delete an error message for a failed memory allocation in arasan_cf_probe()
- Re: [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
- Re: [PATCH] ata: add Amiga Gayle PATA controller driver
- From: John Paul Adrian Glaubitz
- [PATCH v2] libata: disable LPM for Crucial BX100 SSD 500GB drive
- Re: [PATCH] sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
- Re: [PATCH] libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
- Re: [PATCH 1/2] pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()
- Re: [PATCH 1/3] pata_macio: Delete an error message for a failed memory allocation in two functions
- Re: [PATCH] pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()
- Re: [PATCH] sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
- Re: [PATCH] pata_samsung_cf: Delete an error message for a failed memory allocation in pata_s3c_probe()
- Re: [PATCH 3/3] pata_arasan_cf: Move two variable assignments in arasan_cf_probe()
- Re: [PATCH 2/3] pata_arasan_cf: Delete an unnecessary variable initialisation in arasan_cf_probe()
- Re: [PATCH] libata-scsi: Delete an unnecessary variable in ata_scsi_slave_config()
- [PATCH] libata-scsi: Delete an unnecessary variable in ata_scsi_slave_config()
- [PATCH 3/3] pata_arasan_cf: Move two variable assignments in arasan_cf_probe()
- [PATCH 2/3] pata_arasan_cf: Delete an unnecessary variable initialisation in arasan_cf_probe()
- [PATCH 1/3] pata_arasan_cf: Delete an error message for a failed memory allocation in arasan_cf_probe()
- [PATCH 0/3] PATA-Arasan CF: Adjustments for arasan_cf_probe()
- Re: libata: disable LPM for Crucial BX100 SSD drives
- [PATCH 2/2] pata_it821x: Use common error handling code in it821x_firmware_command()
- [PATCH 1/2] pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()
- [PATCH 0/2] PATA-IT821x: Adjustments for it821x_firmware_command()
- [PATCH 3/3] pata_macio: Adjust 11 checks for null pointers
- [PATCH 2/3] pata_macio: Improve a size determination in two functions
- [PATCH 1/3] pata_macio: Delete an error message for a failed memory allocation in two functions
- [PATCH 0/3] PATA-MacIO: Adjustments for five function implementations
- [PATCH 01/12] drivers: base: Unified device connection lookup
- [PATCH 02/12] usb: typec: Start using ERR_PTR
- [PATCH 04/12] usb: common: Small class for USB role switches
- [PATCH 05/12] usb: typec: tcpm: Set USB role switch to device mode when configured as such
- [PATCH 06/12] usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions
- [PATCH 03/12] usb: typec: API for controlling USB Type-C Multiplexers
- [PATCH 07/12] xhci: Add option to get next extended capability in list by passing id = 0
- [PATCH 10/12] usb: typec: driver for Pericom PI3USB30532 Type-C cross switch
- Re: [PATCH 0/12] USB Type-C device-connection, mux and switch support
- [PATCH 09/12] usb: roles: Add Intel XHCI USB role switch driver
- [PATCH] pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()
- [PATCH 11/12] platform/x86: intel_cht_int33fe: Add device connections for the Type-C port
- [PATCH 12/12] extcon: axp288: Set USB role where necessary
- [PATCH 08/12] xhci: Add Intel extended cap / otg phy mux handling
- [PATCH 0/12] USB Type-C device-connection, mux and switch support
- Re: libata: disable LPM for Crucial BX100 SSD drives
- [PATCH] pata_samsung_cf: Delete an error message for a failed memory allocation in pata_s3c_probe()
- [PATCH] libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
- Re: [PATCH] sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
- [PATCH] sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
- [PATCH] libata: disable LPM for Crucial BX100 SSD drives
- Re: [PATCH V7 0/7] Refactor and add AHCI support for tegra210
- Re: [PATCH] libata: update documentation for sysfs interfaces
- Re: [PATCH] ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()
- Re: [PATCH] libata: transport: cleanup documentation of sysfs interface
- Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
- [PATCH] ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()
- [PATCH] libata: transport: cleanup documentation of sysfs interface
- [PATCH] libata: update documentation for sysfs interfaces
- Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
- [PATCH V7 7/7] ata: ahci_tegra: Add AHCI support for Tegra210
- From: Preetham Chandru Ramchandra
- [PATCH V7 6/7] ata: ahci_tegra: disable DIPM
- From: Preetham Chandru Ramchandra
- [PATCH V7 5/7] ata: ahci_tegra: disable devslp for t124
- From: Preetham Chandru Ramchandra
- [PATCH V7 4/7] ata: ahci_tegra: initialize regulators from soc_data
- From: Preetham Chandru Ramchandra
- [PATCH V7 3/7] ata: ahci_tegra: Update initialization sequence
- From: Preetham Chandru Ramchandra
- [PATCH V7 2/7] arm64: tegra: Enable AHCI on Jetson TX1
- From: Preetham Chandru Ramchandra
- [PATCH V7 1/7] dt-bindings: ahci-tegra: add binding documentation
- From: Preetham Chandru Ramchandra
- [PATCH V7 0/7] Refactor and add AHCI support for tegra210
- From: Preetham Chandru Ramchandra
- Re: [PATCH/RFT v3] sata_rcar: Reset SATA PHY when Salvator-X board resumes
- Re: [PATCH] libata: don't try to pass through NCQ commands to non-NCQ devices
- Re: [PATCH] libata: remove WARN() for DMA or PIO command without data
- Re: [PATCH] libata: fix length validation of ATAPI-relayed SCSI commands
- Re: [PATCH] ata: libahci: fix comment indentation
- Re: [PATCH] ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine()
- RE: [PATCH V6 6/7] ata: ahci_tegra: disable DIPM
- RE: [PATCH V6 4/7] ata: ahci_tegra: initialize regulators from soc_data
- RE: [PATCH V6 7/7] ata: ahci_tegra: Add AHCI support for tegra210
- RE: [PATCH V6 3/7] ata: ahci_tegra: Update initialization sequence
- RE: [PATCH V6 2/7] arm64: tegra: Enable AHCI on Jetson TX1
- RE: [PATCH V6 1/7] dt-bindings: tegra: add binding documentation
- Re: [PATCH] Fix compile warning with ATA_DEBUG enabled
- Re: [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
- Re: [PATCH] ata: add Amiga Gayle PATA controller driver
- From: Philippe Ombredanne
- [PATCH] ata: add Amiga Gayle PATA controller driver
- From: Bartlomiej Zolnierkiewicz
- Re: scsi: sg: assorted memory corruptions
- Re: [PATCH/RFT v3] sata_rcar: Reset SATA PHY when Salvator-X board resumes
- [PATCH] ata: libahci: fix comment indentation
- Re: [PATCH/RFT v3] sata_rcar: Reset SATA PHY when Salvator-X board resumes
- [PATCH/RFT v3] sata_rcar: Reset SATA PHY when Salvator-X board resumes
- Re: scsi: sg: assorted memory corruptions
- Re: scsi: sg: assorted memory corruptions
- [PATCH] libata: don't try to pass through NCQ commands to non-NCQ devices
- [PATCH] libata: remove WARN() for DMA or PIO command without data
- [PATCH] libata: fix length validation of ATAPI-relayed SCSI commands
- Re: scsi: sg: assorted memory corruptions
- [GIT] IDE
- Re: [PATCH resend 3/6] cdrom: wait for tray to close
- [GIT PULL] libata changes for v4.16-rc1
- [PATCH] ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine()
- Re: [PATCH] ide: remove duplicated assignment to 'cursg'
- Re: [PATCH resend 6/6] cdrom: wait for drive to become ready
- Re: [PATCH resend 3/6] cdrom: wait for tray to close
- Re: [PATCH resend 2/6] cdrom: factor out common open_for_* code
- Re: [PATCH resend 1/6] delay: add poll_event_interruptible
- Re: [PATCH resend 0/6] Fix cdrom autoclose
- [PATCH resend 5/6] Documentetion: cdrom: introduce CDS_DRIVE_ERROR
- [PATCH resend 1/6] delay: add poll_event_interruptible
- [PATCH resend 3/6] cdrom: wait for tray to close
- [PATCH resend 4/6] cdrom: introduce CDS_DRIVE_ERROR
- [PATCH resend 6/6] cdrom: wait for drive to become ready
- [PATCH resend 2/6] cdrom: factor out common open_for_* code
- Re: [PATCH resend 0/6] Fix cdrom autoclose
- [PATCH resend 0/6] Fix cdrom autoclose
- [PATCH] Fix compile warning with ATA_DEBUG enabled
- Re: [PATCH] ata: pata_it821x: Replace mdelay with usleep_range in it821x_firmware_command
- Re: [PATCH] ata: pata_pdc2027x: Replace mdelay with msleep
- Re: [PATCH] ata: sata_mv: Replace mdelay with usleep_range in mv_reset_channel
- [PATCH] ata: pata_pdc2027x: Replace mdelay with msleep
- [PATCH] ata: pata_it821x: Replace mdelay with usleep_range in it821x_firmware_command
- [PATCH] ata: sata_mv: Replace mdelay with usleep_range in mv_reset_channel
- [PATCH] scsi: ata: don't reset three times if device is offline for SAS host
- Re: [PATCH V6 7/7] ata: ahci_tegra: Add AHCI support for tegra210
- Re: [PATCH V6 6/7] ata: ahci_tegra: disable DIPM
- Re: [PATCH V6 5/7] ata: ahci_tegra: disable devslp for t124
- Re: [PATCH V6 4/7] ata: ahci_tegra: initialize regulators from soc_data
- Re: [PATCH V6 3/7] ata: ahci_tegra: Update initialization sequence
- Re: [PATCH V6 2/7] arm64: tegra: Enable AHCI on Jetson TX1
- Re: [PATCH V6 1/7] dt-bindings: tegra: add binding documentation
- Re: [PATCH V6 1/7] dt-bindings: tegra: add binding documentation
- [GIT PULL] libata fixes for v4.15-rc8
- Re: [PATCH] ata: remove pata_at32
- [PATCH] ata: remove pata_at32
- Re: [PATCH] phy: brcm-sata: fix semicolon.cocci warnings
- [tj-libata:for-4.16 14/15] drivers/phy/broadcom/phy-brcm-sata.c:534:2-3: Unneeded semicolon
- [PATCH] phy: brcm-sata: fix semicolon.cocci warnings
- Re: [PATCH v2 0/2] ata: ahci_brcm: Recover from failures to identify devices
- Re: [PATCH v2 1/2] phy: brcm-sata: Implement calibrate callback
- From: Kishon Vijay Abraham I
- [PATCH] ide: remove duplicated assignment to 'cursg'
- Re: [PATCH v2] sata: sata_rcar: Reset SATA PHY when Salvator-X board resumes
- Re: [PATCH v2] sata: sata_rcar: Reset SATA PHY when Salvator-X board resumes
- Re: [PATCH v2] sata: sata_rcar: Reset SATA PHY when Salvator-X board resumes
- Re: [PATCH v2 0/2] ata: ahci_brcm: Recover from failures to identify devices
- [PATCH v2] sata: sata_rcar: Reset SATA PHY when Salvator-X board resumes
- Re: [PATCH v3 00/27] kill devm_ioremap_nocache
- [PATCH v2 2/2] ata: ahci_brcm: Recover from failures to identify devices
- [PATCH v2 1/2] phy: brcm-sata: Implement calibrate callback
- [PATCH v2 0/2] ata: ahci_brcm: Recover from failures to identify devices
- Re: [PATCH 2/2] ahci: Use usleep_range() in ahci_start_port()
- Re: [PATCH 2/2] ahci: Use usleep_range() in ahci_start_port()
- Re: [PATCH 1/2] ahci: Add Intel Cannon Lake PCH-H PCI ID
- [PATCH 1/2] ahci: Add Intel Cannon Lake PCH-H PCI ID
- [PATCH 2/2] ahci: Use usleep_range() in ahci_start_port()
- Re: [PATCH 1/3] ata: Allow having a port recovery callback
- Re: [PATCH 1/3] ata: Allow having a port recovery callback
- Re: [PATCH 1/3] ata: Allow having a port recovery callback
- [PATCH 1/3] ata: Allow having a port recovery callback
- [PATCH 2/3] phy: brcm-sata: Implementation calibrate callback
- [PATCH 3/3] ata: ahci_brcm: Recover from failures to identify devices
- [PATCH 0/3] ata: ahci_brcm: Recover from failures to identify devices
- [PATCH V6 7/7] ata: ahci_tegra: Add AHCI support for tegra210
- From: Preetham Chandru Ramchandra
- [PATCH V6 6/7] ata: ahci_tegra: disable DIPM
- From: Preetham Chandru Ramchandra
- [PATCH V6 5/7] ata: ahci_tegra: disable devslp for t124
- From: Preetham Chandru Ramchandra
- [PATCH V6 4/7] ata: ahci_tegra: initialize regulators from soc_data
- From: Preetham Chandru Ramchandra
- [PATCH V6 3/7] ata: ahci_tegra: Update initialization sequence
- From: Preetham Chandru Ramchandra
- [PATCH V6 2/7] arm64: tegra: Enable AHCI on Jetson TX1
- From: Preetham Chandru Ramchandra
- [PATCH V6 1/7] dt-bindings: tegra: add binding documentation
- From: Preetham Chandru Ramchandra
- [PATCH V6 0/7] Refactor and add AHCI support for tegra210
- From: Preetham Chandru Ramchandra
- Re: [PATCH 0/2] Change frame type for SET MAX commands
- Re: [PATCH 1/2] ata: enhance the definition of SET MAX feature field value
- Re: [PATCH 1/2] ata: enhance the definition of SET MAX feature field value
- Re: [PATCH] libata:pata_atiixp: Don't use unconnected secondary port on SB600
- Re: [PATCH] ata_piix: constify pci_bits
- Re: libata:pata_atiixp: Don't use unconnected secondary port on SB600
- Re: [PATCH v3 00/27] kill devm_ioremap_nocache
- Re: [PATCH v3 00/27] kill devm_ioremap_nocache
- [PATCH] ata_piix: constify pci_bits
- Re: [PATCH] ata: ahci_brcm: Avoid clobbering SATA_TOP_CTRL_BUS_CTRL
- Re: [PATCH] libata:pata_atiixp: Don't use unconnected secondary port on SB600
- Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
- [PATCH] libata:pata_atiixp: Don't use unconnected secondary port on SB600
- Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
- Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
- [PATCH 2/2] scsi: hisi_sas: Change frame type for SET MAX commands
- [PATCH 0/2] Change frame type for SET MAX commands
- [PATCH 1/2] ata: enhance the definition of SET MAX feature field value
- Re: [PATCH v3 27/27] devres: kill devm_ioremap_nocache
- Re: [PATCH v3 00/27] kill devm_ioremap_nocache
- Re: [PATCH v3 00/27] kill devm_ioremap_nocache
- Re: [PATCH v3 00/27] kill devm_ioremap_nocache
- Re: [PATCH v3 00/27] kill devm_ioremap_nocache
- Re: [PATCH v3 00/27] kill devm_ioremap_nocache
- Re: [PATCH v3 00/27] kill devm_ioremap_nocache
- Re: [PATCH v3 27/27] devres: kill devm_ioremap_nocache
- [PATCH v3 27/27] devres: kill devm_ioremap_nocache
- [PATCH v3 16/27] ata: replace devm_ioremap_nocache with devm_ioremap
- [PATCH v3 00/27] kill devm_ioremap_nocache
- [PATCH] ata: ahci_brcm: Avoid clobbering SATA_TOP_CTRL_BUS_CTRL
- Re: about warning in ata_eh_finish()
- Re: about warning in ata_eh_finish()
- about warning in ata_eh_finish()
- Re: [PATCH V4 10/26] Drivers: ide: deprecate pci_get_bus_and_slot()
- Re: [PATCH] libata: apply MAX_SEC_1024 to all LITEON EP1 series devices
- Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
- [PATCH V4 04/26] ata: deprecate pci_get_bus_and_slot()
- [PATCH V4 10/26] Drivers: ide: deprecate pci_get_bus_and_slot()
- [PATCH] libata: apply MAX_SEC_1024 to all LITEON EP1 series devices
- [PATCH 5/6] Documentetion: cdrom: introduce CDS_DRIVE_ERROR
- [PATCH 0/6] Fix cdrom autoclose
- Re: When will Linux support new RAID controllers
- [GIT PULL] libata fixes for v4.15-rc3
- Re: [PATCH v2] ahci: Allow setting a default LPM policy for mobile chipsets
- [PATCH v2] ahci: Allow setting a default LPM policy for mobile chipsets
- Re: [PATCH 3/3] ahci: Allow setting a default LPM policy for mobile chipsets
- Re: [PATCH v5] pata_pdc2027x: Fix pdc_adjust_pll() to return the error value
- Re: [PATCH 3/3] ahci: Allow setting a default LPM policy for mobile chipsets
- Re: [PATCH 2/3] ahci: Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI
- Re: When will Linux support new RAID controllers
- Re: When will Linux support new RAID controllers
- Re: When will Linux support new RAID controllers
- Re: [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
- [PATCH] sata: rcar_sata: Reset SATA PHY when Salvator-X board resumes
- [PATCH v5] pata_pdc2027x: Fix pdc_adjust_pll() to return the error value
- [PATCH 1/3] ahci: Annotate PCI ids for mobile Intel chipsets as such
- [PATCH 2/3] ahci: Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI
- [PATCH 3/3] ahci: Allow setting a default LPM policy for mobile chipsets
- [PATCH 0/3] ahci: Allow setting a default LPM policy for mobile chipsets
- Re: [PATCH v2] pata_pdc2027x: Fix coding sytle errors
- Re: [PATCH v4] pata_pdc2027x: Fix pdc_adjust_pll() to return the error value
- Re: [PATCH v2] pata_pdc2027x: Fix coding sytle errors
- [PATCH v4] pata_pdc2027x: Fix pdc_adjust_pll() to return the error value
- [PATCH v2] pata_pdc2027x: Fix coding sytle errors
- Re: [PATCH] pata_pdc2027x: Fix coding sytle error
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] pata_pdc2027x: Fix coding sytle error
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH v3] pata_pdc2027x: Remove unnecessary error check
- From: Bartlomiej Zolnierkiewicz
- Re: When will Linux support new RAID controllers
- Re: [PATCH] libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
- Re: Wiki account on ata.wiki.kernel.org?
- Re: [PATCH 2/2] ahci: mtk: Change driver name to ahci-mtk
- Re: Wiki account on ata.wiki.kernel.org?
- From: Matthias Peter Walther
- Re: Wiki account on ata.wiki.kernel.org?
- Re: [PATCH] ahci: qoriq: refine port register configuration
- [PATCH] ahci: qoriq: refine port register configuration
- Wiki account on ata.wiki.kernel.org?
- From: Matthias Peter Walther
- [PATCH 2/2] ahci: mtk: Change driver name to ahci-mtk
- Re: AM4 B350 chipset Sata/IDE problem
- Re: [PATCH] libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
- Re: [PATCH V3 04/29] ata: deprecate pci_get_bus_and_slot()
- Re: [PATCH] pata_pdc2027x : make pdc2027x_*_timing structures const
- Re: [PATCH] ata: mediatek: Fix typo in module description
- Re: [patch] lewisburg map/pcs register handling
- Re: [PATCH] libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
- [PATCH V3 04/29] ata: deprecate pci_get_bus_and_slot()
- [PATCH V3 11/29] Drivers: ide: deprecate pci_get_bus_and_slot()
- [PATCH] pata_pdc2027x : make pdc2027x_*_timing structures const
- Re: [PATCH] pata_pdc2027x: Fix coding sytle error
- Re: [PATCH] pata_pdc2027x: Fix coding sytle error
- [PATCH] pata_pdc2027x: Fix coding sytle error
- [PATCH v3] pata_pdc2027x: Remove unnecessary error check
- Re: [PATCH] pata_pdc2027x: Remove unnecessary error check and coding style error.
- Re: [PATCH] pata_pdc2027x: Remove unnecessary error check and coding style error.
- [PATCH v2] pata_pdc2027x: Remove unnecessary error check and coding style error.
- Re: [PATCH] pata_pdc2027x: Remove unnecessary error check and coding style error.
- [PATCH] pata_pdc2027x: Remove unnecessary error check and coding style error.
- Re: AM4 B350 chipset Sata/IDE problem
- [PATCH V2 04/29] ata: deprecate pci_get_bus_and_slot()
- [PATCH V2 11/29] Drivers: ide: deprecate pci_get_bus_and_slot()
- Re: [PATCH 12/30] Drivers: ide: deprecate pci_get_bus_and_slot()
- Re: AM4 B350 chipset Sata/IDE problem
- Re: AM4 B350 chipset Sata/IDE problem
- Re: [PATCH 12/30] Drivers: ide: deprecate pci_get_bus_and_slot()
- [PATCH 04/30] ata: deprecate pci_get_bus_and_slot()
- [PATCH 12/30] Drivers: ide: deprecate pci_get_bus_and_slot()
- AM4 B350 chipset Sata/IDE problem
- Re: [ata_port_probe] BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
- Re: [ata_port_probe] BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
- Re: [ata_port_probe] BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
- Re: [ata_port_probe] BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
- [ata_port_probe] BUG: unable to handle kernel NULL pointer dereference at 0000000000000350
- Re: [ata_port_detach] WARNING: CPU: 0 PID: 1 at drivers/ata/libata-core.c:6613 ata_port_detach+0x9b/0x180
- [ata_port_detach] WARNING: CPU: 0 PID: 1 at drivers/ata/libata-core.c:6613 ata_port_detach+0x9b/0x180
- [PATCH] ata: mediatek: Fix typo in module description
- [GIT] IDE
- [GIT PULL] libata changes for v4.15-rc1
- Re: Delock 89384 Sata Controller Causes Lockups Under Heavy Load
- From: Matthias Peter Walther
- [patch] lewisburg map/pcs register handling
- [PATCH] libata: sata_down_spd_limit should return if driver has not recorded sstatus speed
- Re: [PATCH v2] ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
- Re: [PATCH v1] ata: sata_dwc_460ex: Propagate platform device ID to DMA driver
- Re: Manual unbind of ATA devices causes use-after-free
- Re: Manual unbind of ATA devices causes use-after-free
- [PATCH v2] ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
- Re: [PATCH] ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
- [PATCH] ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
- Re: When will Linux support new RAID controllers
- [PATCH v1] ata: sata_dwc_460ex: Propagate platform device ID to DMA driver
- Re: When will Linux support new RAID controllers
- Re: When will Linux support new RAID controllers
- Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
- From: Bartlomiej Zolnierkiewicz
- Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
- From: Bartlomiej Zolnierkiewicz
- Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] drivers/ide-cd: Handle missing driver data during status check gracefully
- Re: [PATCH] drivers/ide-cd: Handle missing driver data during status check gracefully
- [PATCH] drivers/ide-cd: Handle missing driver data during status check gracefully
- Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
- Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
- Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
- Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
- Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
- Re: [bug report] ata: ceva: Move sata port phy oob settings to device-tree
- RE: [bug report] ata: ceva: Move sata port phy oob settings to device-tree
- From: Anurag Kumar Vulisha
- [bug report] ata: ceva: Move sata port phy oob settings to device-tree
- Re: [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
- [cdrom_check_status] BUG: unable to handle kernel NULL pointer dereference at 000001c0
- Re: [ata_scsi_offline_dev] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
- Re: [ata_scsi_offline_dev] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
- Re: [ata_scsi_offline_dev] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
- Re: [ata_scsi_offline_dev] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
- Re: Manual unbind of ATA devices causes use-after-free
- Re: Manual unbind of ATA devices causes use-after-free
- Re: [PATCH v2] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
- Re: Manual unbind of ATA devices causes use-after-free
- [PATCH] ide: Convert timers to use timer_setup()
- Re: [PATCH] block: fix CDROM dependency on BLK_DEV
- Re: [PATCH] block: fix CDROM dependency on BLK_DEV
- Re: [PATCH] block: fix CDROM dependency on BLK_DEV
- Re: [PATCH] block: fix CDROM dependency on BLK_DEV
- Re: [PATCH] block: fix CDROM dependency on BLK_DEV
- [PATCH] block: fix CDROM dependency on BLK_DEV
- [PATCH v2] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
- From: Rameshwar Prasad Sahu
- Re: [PATCH] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
- Manual unbind of ATA devices causes use-after-free
- Re: [PATCH] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
- problem with Marvell 88SE9215
- Re: [PATCH] ahci: Add support for Cavium's fifth generation SATA controller
- Re: BUG: unable to handle kernel paging request in ata_bmdma_qc_prep
- WARNING in ata_bmdma_qc_issue
- BUG: unable to handle kernel paging request in ata_bmdma_qc_prep
- Re: [PATCH] ata: pata_pdc2027x: Fix space before '[' error.
- [PATCH] ata: pata_pdc2027x: Fix space before '[' error.
- Re: WARNING in ata_qc_issue
- Re: [PATCH] libata: fix spelling mistake: 'ambigious' -> 'ambiguous'
- [PATCH] libata: fix spelling mistake: 'ambigious' -> 'ambiguous'
- WARNING in ata_qc_issue
- Re: WARNING in ata_qc_issue
- Re: [PATCH] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
- [PATCH] ata: fixes kernel crash while tracing ata_eh_link_autopsy event
- From: Rameshwar Prasad Sahu
- Re: [PATCH 0/2] libata: hotplug link speed
- Re: [PATCH v2 2/9] ata: ceva: Move sata port phy oob settings to device-tree
- Re: [PATCH v2 0/9] Ata ceva patches
- Re: [PATCH 0/2] libata: hotplug link speed
- Re: [PATCH 1/2] libata: initialize link speed from sstatus if online.
- Re: [PATCH] ata: mark expected switch fall-throughs
- Re: [PATCH] ata: sata_mv: remove a redundant assignment to pointer ehi
- Re: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
- Re: [PATCH v2 2/9] ata: ceva: Move sata port phy oob settings to device-tree
- Re: [PATCH v2 2/9] ata: ceva: Move sata port phy oob settings to device-tree
- Re: [PATCH V8 5/5] libata: Align DMA buffer todma_get_cache_alignment()
- Re: [PATCH V8 4/5] libsas: Align SMP req/resp to dma_get_cache_alignment()
- [PATCH 1/2] libata: initialize link speed from sstatus if online.
- [PATCH 2/2] Allow error handler to change speed only if link is online.
- [PATCH 0/2] libata: hotplug link speed
- Re: [PATCH V8 4/5] libsas: Align SMP req/resp to dma_get_cache_alignment()
- Re: [PATCH V8 3/5] scsi: Align block queue to dma_get_cache_alignment()
- Re: [PATCH V8 1/5] dma-mapping: Rework dma_get_cache_alignment()
- Re: [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()
- Re: [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()
- Re: [PATCH V8 1/5] dma-mapping: Rework dma_get_cache_alignment()
- Re: [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()
- Re: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
- BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
- Re: [PATCH V8 4/5] libsas: Align SMP req/resp todma_get_cache_alignment()
- Re: [PATCH V8 5/5] libata: Align DMA buffer todma_get_cache_alignment()
- Re: [PATCH V8 4/5] libsas: Align SMP req/resp to dma_get_cache_alignment()
- Re: [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()
- [PATCH V8 1/5] dma-mapping: Rework dma_get_cache_alignment()
- [PATCH V8 2/5] MIPS: Implement dma_map_ops::get_cache_alignment()
- [PATCH V8 4/5] libsas: Align SMP req/resp to dma_get_cache_alignment()
- [PATCH V8 5/5] libata: Align DMA buffer to dma_get_cache_alignment()
- [PATCH V8 3/5] scsi: Align block queue to dma_get_cache_alignment()
- Re: [PATCH] ahci: Add support for Cavium's fifth generation SATA controller
- [PATCH] ahci: Convert timers to use timer_setup()
- [PATCH] libata: Convert timers to use timer_setup()
- [PATCH] ata: sata_mv: remove a redundant assignment to pointer ehi
- Re: [PATCH 1/2] dt-bindings: add binding for Allwinner R40 SATA AHCI controller
- [PATCH] ata: mark expected switch fall-throughs
- From: Gustavo A. R. Silva
- Re: [PATCH] documentation: Update ide-cd documentation to reflect CONFIG_BLK_DEV_HD_IDE removal
- [PATCH] documentation: Update ide-cd documentation to reflect CONFIG_BLK_DEV_HD_IDE removal
- Re: [PATCH] ahci: Add support for Cavium's fifth generation SATA controller
- [PATCH] ahci: Add support for Cavium's fifth generation SATA controller
- From: Radha Mohan Chintakuntla
- Re: [PATCH 1/2] dt-bindings: add binding for Allwinner R40 SATA AHCI controller
- Re: [PATCH 2/2] ata: ahci_sunxi: add support for R40 SATA controller
- Re: Marvell 88SE9480 Port Multiplier Support
- Re: Marvell 88SE9480 Port Multiplier Support
- [PATCH 2/2] ata: ahci_sunxi: add support for R40 SATA controller
- [PATCH 1/2] dt-bindings: add binding for Allwinner R40 SATA AHCI controller
- Marvell 88SE9480 Port Multiplier Support
- Re: [PATCH] ahci: Convert timers to use timer_setup()
- Re: [PATCH] ahci: Convert timers to use timer_setup()
- Re: [PATCH] ahci: Convert timers to use timer_setup()
- Re: [PATCH] libata: Convert timers to use timer_setup()
- Re: [PATCH] ata: sata_rcar: Use of_device_get_match_data() helper
- [PATCH] libata: Convert timers to use timer_setup()
- [PATCH] ahci: Convert timers to use timer_setup()
- Re: [PATCH] ata: sata_rcar: Use of_device_get_match_data() helper
- [PATCH] ata: sata_rcar: Use of_device_get_match_data() helper
- Resolved: downloads for SAS2008 based HBAs
- Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
- Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
- Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
- Re: [PATCH v2] ide: pci: free PCI BARs on initialization failure
- Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
- Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
- Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
- Re: [PATCH v2] ide: pci: free PCI BARs on initialization failure
- Re: [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
- [GIT PULL] libata fixes for v4.14-rc3
- Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
- From: Bartlomiej Zolnierkiewicz
- [PATCH v2] ide: pci: free PCI BARs on initialization failure
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
- From: Bartlomiej Zolnierkiewicz
- [PATCH] ide: pci: free PCI BARs on initialization failure
- From: Bartlomiej Zolnierkiewicz
- [PATCH v2] ide: add missing hwif->portdev freeing on hwif_init() failure
- From: Bartlomiej Zolnierkiewicz
- [PATCH] ide: add missing hwif->portdev freeing on hwif_init() failure
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
- downloads for SAS2008 based HBAs
- Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
- Re: [PATCH] ahci: don't ignore result code of ahci_reset_controller()
- Re: [PATCH] ahci: don't ignore result code of ahci_reset_controller()
- Re: [PATCH] ahci: don't ignore result code of ahci_reset_controller()
- [PATCH] ahci: don't ignore result code of ahci_reset_controller()
- Re: [PATCH] libata: make ata_port_type const
- Re: [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
- [PATCH v2] drivers/ide/pci: Fix legacy IRQ assignment
- [PATCH] libata: make ata_port_type const
- Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
- Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
- Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
- Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
- Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
- Re: [PATCH] PCI: Fix legacy IRQ assignment execution stage
- Re: alpha runtime warnings due to commit 0e4c2eeb758 ("alpha/PCI: Replace pci_fixup_irqs() call with host ...")
- [PATCH] PCI: Fix legacy IRQ assignment execution stage
- Re: alpha runtime warnings due to commit 0e4c2eeb758 ("alpha/PCI: Replace pci_fixup_irqs() call with host ...")
- Re: alpha runtime warnings due to commit 0e4c2eeb758 ("alpha/PCI: Replace pci_fixup_irqs() call with host ...")
- Re: hitting a WARN() in ata_host_activate on 4.13
- hitting a WARN() in ata_host_activate on 4.13
- Re: [PATCH][V3] libata: make static arrays const, reduces object code size
- [PATCH][V3] libata: make static arrays const, reduces object code size
- Re: [PATCH] ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs
- Re: [PATCH] libata: make static arrays const, reduces object code size
- Re: [PATCH] ata: pata_artop: remove redundant initialization of pio
- Re: [PATCH] libata: Add new med_power_with_dipm link_power_management_policy setting
- [PATCH] ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs
- Re: [PATCH][V2] libata: make const arrays static, reduces object code size
- [PATCH][V2] libata: make const arrays static, reduces object code size
- [PATCH] libata: make static arrays const, reduces object code size
- [PATCH] ata: pata_artop: remove redundant initialization of pio
- [PATCH 0/1] libata: Add new med_power_with_dipm link_power_management_policy setting
- [PATCH] libata: Add new med_power_with_dipm link_power_management_policy setting
- Re: [PATCH] [RESEND] ata: avoid gcc-7 warning in ata_timing_quantize
- [PATCH] [RESEND] ata: avoid gcc-7 warning in ata_timing_quantize
- Re: [GIT PULL] libata changes for v4.14-rc1
- Re: [PATCH] libata: zpodd: make arrays cdb static, reduces object code size
- Re: [PATCH] ahci: don't use MSI for devices with the braindead Intel NVMe remapping scheme
- [PATCH] libata: zpodd: make arrays cdb static, reduces object code size
- Re: [PATCH] ahci: don't use MSI for devices with the braindead Intel NVMe remapping scheme
- [PATCH] ahci: don't use MSI for devices with the braindead Intel NVMe remapping scheme
- Re: Boot failure due to some interaction between per-port MSI-X and Intel RST
- Re: Boot failure due to some interaction between per-port MSI-X and Intel RST
- [GIT PULL] libata changes for v4.14-rc1
- Re: Boot failure due to some interaction between per-port MSI-X and Intel RST
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]