This patchset add support for allwinner R40 AHCI controller. The whole patchset is tested on sun8i-r40-bananapi-m2-ultra and on sun7i-a20-cubieboard2 which doesnt have any of the ressources added by this serie, so no regression should come with it. Patchs 1-7 should go via the ata tree Patchs 8,9 should go via the sunxi tree Changes since v4: - dropped PHY dedicated driver - added the optionnal phy-supply Changes since v3: - Moved PHY code to a new sun4i-a10-phy-sata driver - Removed reset code since ahci_platform support now reset controller. Changes since V2 - Moved all ressources management to ahci_platform Corentin Labbe (9): dt-bindings: ata: ahci-platform: fix indentation of target-supply ata: ahci_platform: add support for AHCI controller regulator dt-bindings: ata: ahci-platform: document ahci-supply ata: ahci_platform: add support for PHY controller regulator dt-bindings: ata: ahci-platform: document phy-supply ata: ahci_sunxi: add support for r40 dt-bindings: ata: update ahci_sunxi bindings ARM: dts: sun8i: r40: add sata node ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI .../devicetree/bindings/ata/ahci-platform.txt | 6 ++- arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 18 +++++++++ arch/arm/boot/dts/sun8i-r40.dtsi | 13 ++++++ drivers/ata/ahci.h | 2 + drivers/ata/ahci_sunxi.c | 3 +- drivers/ata/libahci_platform.c | 46 +++++++++++++++++++++- 6 files changed, 84 insertions(+), 4 deletions(-) -- 2.16.4
