Jens Axboe <axboe@xxxxxxxxx> writes: > On 6/18/18 1:33 AM, Michael Ellerman wrote: >> Tejun Heo <tj@xxxxxxxxxx> writes: >> ... >>> Jens Axboe (10): >>> libata: introduce notion of separate hardware tags >>> libata: convert core and drivers to ->hw_tag usage >>> libata: bump ->qc_active to a 64-bit type >>> libata: use ata_tag_internal() consistently >>> libata: remove assumption that ATA_MAX_QUEUE - 1 is the max >>> sata_nv: set host can_queue count appropriately >>> libata: add extra internal command >> >> Replying here because I can't find the original mail. >> >> The above commit is causing one of my machines to constantly spew ata >> messages on the console, according to bisect: >> >> # first bad commit: [28361c403683c2b00d4f5e76045f3ccd299bf99d] libata: add extra internal command >> >> To get it to boot I have to also apply: >> >> 88e10092f6a6 ("sata_fsl: use the right type for tag bitshift") >> >> >> The system boots OK and seems fine, except that it's just printing >> multiple of these per second: >> >> ata2: Signature Update detected @ 0 msecs >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> ata2.00: configured for UDMA/100 >> ata2: Signature Update detected @ 0 msecs >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> ata2.00: configured for UDMA/100 >> ata2: Signature Update detected @ 0 msecs >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> ata2.00: configured for UDMA/100 >> ata2: Signature Update detected @ 0 msecs >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> ata2.00: configured for UDMA/100 >> ata2: Signature Update detected @ 0 msecs >> >> And it never seems to stop. >> >> The machine is a Freescale/NXP P5020ds, using the sata_fsl driver >> presumably. Any ideas? > > Hmm that's odd. Can you include the boot log from a working boot as > well? Would be nice to see what devices are on the sata adapter. > The above just looks like a hardreset loop. Ah yep. I stupidly assumed it was working, because the machine booted, but that's because the root disk is on ata1. Booting the good kernel: ba80c3a572f4 ("sata_nv: set host can_queue count appropriately") I see: root@p5020ds:~# ls -l /sys/class/ata_port/ total 0 lrwxrwxrwx 1 root root 0 Jun 19 06:49 ata1 -> ../../devices/platform/ffe000000.soc/ffe220000.sata/ata1/ata_port/ata1 lrwxrwxrwx 1 root root 0 Jun 19 17:06 ata2 -> ../../devices/platform/ffe000000.soc/ffe221000.sata/ata2/ata_port/ata2 root@p5020ds:~# ls -l /sys/class/block/ | grep ata lrwxrwxrwx 1 root root 0 Jun 19 17:11 sda -> ../../devices/platform/ffe000000.soc/ffe220000.sata/ata1/host0/target0:0:0/0:0:0:0/block/sda lrwxrwxrwx 1 root root 0 Jun 19 17:11 sda1 -> ../../devices/platform/ffe000000.soc/ffe220000.sata/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda1 lrwxrwxrwx 1 root root 0 Jun 19 17:11 sda2 -> ../../devices/platform/ffe000000.soc/ffe220000.sata/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda2 lrwxrwxrwx 1 root root 0 Jun 19 17:11 sda5 -> ../../devices/platform/ffe000000.soc/ffe220000.sata/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda5 lrwxrwxrwx 1 root root 0 Jun 19 17:11 sr0 -> ../../devices/platform/ffe000000.soc/ffe221000.sata/ata2/host1/target1:0:0/1:0:0:0/block/sr0 So it's the DVD drive. root@p5020ds:/sys/devices/platform/ffe000000.soc/ffe221000.sata/ata2/host1/target1:0:0/1:0:0:0/scsi_device/1:0:0:0/device# cat vendor Optiarc root@p5020ds:/sys/devices/platform/ffe000000.soc/ffe221000.sata/ata2/host1/target1:0:0/1:0:0:0/scsi_device/1:0:0:0/device# cat model DVD RW AD-7260S Full boot log from a good boot attached if that's helpful. All of the above looks the same when I boot with the broken setup, it just spams dmesg constantly. One thing that is different, on the good kernel I see: root@p5020ds:~# mount /dev/sr0 /mnt mount: no medium found on /dev/sr0 vs bad (88e10092f6a6): root@p5020ds:~# mount /dev/sr0 /mnt mount: /dev/sr0 is already mounted or /mnt busy cheers
U-Boot 2015.04-rc2-00081-g47d8ae4-dirty (Feb 26 2015 - 15:10:42) CPU0: P5020E, Version: 2.0, (0x82280020) Core: e5500, Version: 1.2, (0x80240012) Clock Configuration: CPU0:2000 MHz, CPU1:2000 MHz, CCB:800 MHz, DDR:666.667 MHz (1333.333 MT/s data rate) (Asynchronous), LBC:100 MHz FMAN1: 600 MHz QMAN: 400 MHz PME: 400 MHz L1: D-cache 32 KiB enabled I-cache 32 KiB enabled Reset Configuration Word (RCW): 00000000: 0c540000 00000000 1e120000 00000000 00000010: d8984a01 03002000 58000000 41000000 00000020: 00000000 00000000 00000000 10070000 00000030: 00000000 00000000 00000000 00000000 Board: P5020DS, Sys ID: 0x1c, Sys Ver: 0x12, FPGA Ver: 0x05, vBank: 0 SERDES Reference Clocks: Bank1=100Mhz Bank2=125Mhz Bank3=125Mhz I2C: ready SPI: ready DRAM: Initializing....using SPD Detected UDIMM i-DIMM Detected UDIMM i-DIMM 2 GiB left unmapped Testing 0x00000000 - 0x7fffffff Testing 0x80000000 - 0xffffffff Remap DDR 2 GiB left unmapped 4 GiB (DDR3, 64-bit, CL=9, ECC on) DDR Controller Interleaving Mode: cache line DDR Chip-Select Interleaving Mode: CS0+CS1 POST memory PASSED Flash: 128 MiB L2: 512 KiB enabled Corenet Platform Cache: 2 MiB enabled SRIO1: disabled SRIO2: disabled NAND: 1024 MiB MMC: FSL_SDHC: 0 SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB EEPROM: CRC mismatch (56e8e0ae != ffffffff) PCIe1: Root Complex, no link, regs @ 0xfe200000 PCIe1: Bus 00 - 00 PCIe2: disabled PCIe3: Root Complex, x2 gen1, regs @ 0xfe202000 02:00.0 - 8086:105e - Network controller 02:00.1 - 8086:105e - Network controller PCIe3: Bus 01 - 02 PCIe4: disabled In: serial Out: serial Err: serial Net: Initializing Fman SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 KiB, total 16 MiB Fman1: Data at 7fdf7f90 is not a firmware e1000: 00:15:17:54:a8:b2 e1000: 00:15:17:54:a8:b3 e1000#0, e1000#1 Hit any key to stop autoboot: 0 Using e1000#0 device TFTP from server 10.61.2.7; our IP address is 10.61.200.147 Filename 'p5020ds/uImage'. Load address: 0x1000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################## 13.6 MiB/s done Bytes transferred = 6634161 (653ab1 hex) Using e1000#0 device TFTP from server 10.61.2.7; our IP address is 10.61.200.147 Filename 'p5020ds/p5020ds.dtb'. Load address: 0xc000000 Loading: ### 6.2 MiB/s done Bytes transferred = 32322 (7e42 hex) WARNING: adjusting available memory to 30000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux-4.17.0-rc4-gcc-7.0.1-00013 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 6634097 Bytes = 6.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 0c000000 Booting using the fdt blob at 0xc000000 Uncompressing Kernel Image ... OK Loading Device Tree to 03fe5000, end 03fffe41 ... OK OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr MMU: Supported page sizes 4 KB as direct 4096 KB as direct 16384 KB as direct 65536 KB as direct 262144 KB as direct 1048576 KB as direct MMU: Book3E HW tablewalk not supported Linux version 4.17.0-rc4-gcc-7.0.1-00013-gba80c3a572f4 (michael@xxxxxxxxxxxxxxxxxx) (gcc version 7.0.1 20170213 (experimental) (Custom 8e8a14c238db56c7)) #166 SMP Mon Jun 18 17:31:54 AEST 2018 Using CoreNet Generic machine description bootconsole [udbg0] enabled CPU maps initialized for 1 thread per core ----------------------------------------------------- phys_mem_size = 0x100000000 dcache_bsize = 0x40 icache_bsize = 0x40 cpu_features = 0x00000003008003b4 possible = 0x00000003009003b6 always = 0x00000003008003b4 cpu_user_features = 0xcc008000 0x08000000 mmu_features = 0x000a0010 firmware_features = 0x0000000000000000 ----------------------------------------------------- CoreNet Generic board Zone ranges: DMA [mem 0x0000000000000000-0x000000007fffffff] DMA32 empty Normal [mem 0x0000000080000000-0x00000000ffffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x00000000ffffffff] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ffffffff] MMU: Allocated 2112 bytes of context maps for 255 contexts percpu: Embedded 22 pages/cpu @ (ptrval) s51416 r0 d38696 u524288 Built 1 zonelists, mobility grouping on. Total pages: 1034240 Kernel command line: root=/dev/sda1 rw console=ttyS0,115200 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 3995012K/4194304K available (9988K kernel code, 1964K rwdata, 3212K rodata, 524K init, 306K bss, 199292K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. RCU event tracing is enabled. RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 2 CPUs mpic: ISU size: 512, shift: 9, mask: 1ff mpic: Initializing for 512 sources clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns clocksource: timebase mult[28000000] shift[24] registered Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) e500 family performance monitor hardware support registered Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 2 CPUs Using standard scheduler topology devtmpfs: initialized random: get_random_u32 called from .bucket_table_alloc+0x9c/0x22c with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 audit: initializing netlink subsys (disabled) audit: type=2000 audit(0.044:1): state=initialized audit_enabled=0 res=1 Machine: fsl,P5020DS SoC family: QorIQ SoC ID: svr:0x82280020, Revision: 2.0 Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->0 PCI host bridge /pcie@ffe200000 ranges: MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000 /pcie@ffe200000: PCICSRBAR @ 0xdf000000 setup_pci_atmu: end of DRAM 100000000 /pcie@ffe200000: Setup 64-bit PCI DMA window /pcie@ffe200000: DMA window size is 0xdf000000 Found FSL PCI host bridge at 0x0000000ffe202000. Firmware bus number: 0->1 PCI host bridge /pcie@ffe202000 ranges: MEM 0x0000000c40000000..0x0000000c5fffffff -> 0x00000000e0000000 IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000 /pcie@ffe202000: PCICSRBAR @ 0xdf000000 setup_pci_atmu: end of DRAM 100000000 /pcie@ffe202000: Setup 64-bit PCI DMA window /pcie@ffe202000: DMA window size is 0xdf000000 iommu: Adding device ff4200000.qman-portal to group 0 iommu: Adding device ff4204000.qman-portal to group 1 iommu: Adding device ff4208000.qman-portal to group 2 iommu: Adding device ff420c000.qman-portal to group 3 iommu: Adding device ff4210000.qman-portal to group 4 iommu: Adding device ff4214000.qman-portal to group 5 iommu: Adding device ff4218000.qman-portal to group 6 iommu: Adding device ff421c000.qman-portal to group 7 iommu: Adding device ff4220000.qman-portal to group 8 iommu: Adding device ff4224000.qman-portal to group 9 iommu: Adding device ffe100300.dma to group 10 iommu: Adding device ffe101300.dma to group 11 iommu: Adding device ffe114000.sdhc to group 12 iommu: Adding device ffe210000.usb to group 13 iommu: Adding device ffe211000.usb to group 14 iommu: Adding device ffe220000.sata to group 15 iommu: Adding device ffe221000.sata to group 16 iommu: Adding device ffe318000.qman to group 17 iommu: Adding device ffe31a000.bman to group 18 iommu: Adding device ffe200000.pcie to group 19 iommu: Adding device ffe202000.pcie to group 20 software IO TLB [mem 0xf4800000-0xf8800000] (64MB) mapped at [ (ptrval)- (ptrval)] PCI: Probing PCI hardware fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x8000080000010000-0x800008000001ffff] (bus address [0x0000-0xffff]) pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff]) pci_bus 0000:00: root bus resource [bus 00] iommu: Removing device ffe200000.pcie from group 19 iommu: Adding device 0000:00:00.0 to group 19 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0000:00:00.0: PCI bridge to [bus 01-ff] fsl-pci ffe202000.pcie: PCI host bridge to bus 2000:00 pci_bus 2000:00: root bus resource [io 0x8000080000021000-0x8000080000030fff] (bus address [0x0000-0xffff]) pci_bus 2000:00: root bus resource [mem 0xc40000000-0xc5fffffff] (bus address [0xe0000000-0xffffffff]) pci_bus 2000:00: root bus resource [bus 00-01] iommu: Removing device ffe202000.pcie from group 20 iommu: Adding device 2000:00:00.0 to group 20 iommu: Adding device 2000:01:00.0 to group 20 iommu: Adding device 2000:01:00.1 to group 20 pci 2000:00:00.0: PCI bridge to [bus 01-ff] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap PCI: Cannot allocate resource region 0 of device 2000:00:00.0, will remap pci 0000:00:00.0: BAR 0: no space for [mem size 0x01000000] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x01000000] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [io 0x8000080000010000-0x800008000001ffff] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc pci 2000:00:00.0: BAR 0: no space for [mem size 0x01000000] pci 2000:00:00.0: BAR 0: failed to assign [mem size 0x01000000] pci 2000:01:00.0: BAR 6: assigned [mem 0xc40080000-0xc4009ffff pref] pci 2000:01:00.1: BAR 6: assigned [mem 0xc400a0000-0xc400bffff pref] pci 2000:00:00.0: PCI bridge to [bus 01] pci 2000:00:00.0: bridge window [io 0x8000080000021000-0x8000080000030fff] pci 2000:00:00.0: bridge window [mem 0xc40000000-0xc5fffffff] pci_bus 2000:00: Some PCI device resources are unassigned, try booting with pci=realloc HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages HugeTLB registered 16.0 MiB page size, pre-allocated 0 pages HugeTLB registered 64.0 MiB page size, pre-allocated 0 pages HugeTLB registered 256 MiB page size, pre-allocated 0 pages HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages Freescale Elo series DMA driver fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28 fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29 fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30 fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31 fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32 fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33 fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34 fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource timebase NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 7, 524288 bytes) TCP: Hash tables configured (established 32768 bind 32768) UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. workingset: timestamp_bits=62 max_order=20 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). ntfs: driver 2.1.32 [Flags: R/O]. jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered pcieport 0000:00:00.0: AER enabled with IRQ 482 pcieport 2000:00:00.0: AER enabled with IRQ 480 bman_portal ff4000000.bman-portal: Portal initialised, cpu 0 bman_portal ff4004000.bman-portal: Portal initialised, cpu 1 qman_portal ff4200000.qman-portal: Portal initialised, cpu 0 qman_portal ff4204000.qman-portal: Portal initialised, cpu 1 Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled console [ttyS0] disabled serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 24999999) is a 16550A console [ttyS0] enabled console [ttyS0] enabled bootconsole [udbg0] disabled bootconsole [udbg0] disabled serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 24999999) is a 16550A serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 24999999) is a 16550A serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 24999999) is a 16550A ePAPR hypervisor byte channel driver brd: module loaded loop: module loaded st: Version 20160209, fixed bufsize 32768, s/g segs 256 fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init scsi host0: sata_fsl ata1: SATA max UDMA/133 irq 68 fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init ata1: Signature Update detected @ 0 msecs scsi host1: sata_fsl ata2: SATA max UDMA/133 irq 69 ata2: Signature Update detected @ 0 msecs fe8000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002801 Amd/Fujitsu Extended Query Table at 0x0040 Amd/Fujitsu Extended Query version 1.3. number of CFI chips: 1 ftl_cs: FTL header not found. nand: device found, Manufacturer ID: 0x20, Chip ID: 0xd3 nand: ST Micro NAND08GW3B2CN6 nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table found at page 524224, version 0x01 Bad block table found at page 524160, version 0x01 nand_read_bbt: bad block at 0x00000b9e0000 6 fixed-partitions partitions found on MTD device fffa00000.flash Creating 6 MTD partitions on "fffa00000.flash": 0x000000000000-0x000002000000 : "NAND U-Boot Image" ftl_cs: FTL header not found. 0x000002000000-0x000012000000 : "NAND Root File System" ftl_cs: FTL header not found. 0x000012000000-0x00001a000000 : "NAND Compressed RFS Image" ftl_cs: FTL header not found. 0x00001a000000-0x00001e000000 : "NAND Linux Kernel Image" ftl_cs: FTL header not found. 0x00001e000000-0x00001f000000 : "NAND DTB Image" ftl_cs: FTL header not found. 0x00001f000000-0x000040000000 : "NAND Writable User area" ftl_cs: FTL header not found. eLBC NAND device at 0xfffa00000, bank 2 fsl_espi ffe110000.spi: cs=0, init_csmode=0x100008 m25p80 spi0.0: found s25fl129p1, expected s25sl12801 m25p80 spi0.0: s25fl129p1 (16384 Kbytes) 4 fixed-partitions partitions found on MTD device spi0.0 Creating 4 MTD partitions on "spi0.0": 0x000000000000-0x000000100000 : "u-boot" ftl_cs: FTL header not found. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) 0x000000100000-0x000000600000 : "kernel" ata1.00: ATA-8: Hitachi HDS721050CLA362, JP2OA3MA, max UDMA/133 ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 16/32) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ftl_cs: FTL header not found. ata2.00: ATAPI: Optiarc DVD RW AD-7260S, 1.03, max UDMA/100 ata1.00: configured for UDMA/133 0x000000600000-0x000000700000 : "dtb" scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72105 A3MA PQ: 0 ANSI: 5 ata2.00: configured for UDMA/100 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7260S 1.03 PQ: 0 ANSI: 5 random: fast init done ftl_cs: FTL header not found. 0x000000700000-0x000001000000 : "file system" ftl_cs: FTL header not found. fsl_espi ffe110000.spi: at 0x (ptrval) (irq = 53) libphy: Fixed MDIO Bus: probed libphy: Freescale XGMAC MDIO Bus: probed mdio_bus ffe4f1000: Error while reading PHY4 reg at 1.6 mdio_bus ffe4f1000: Error while reading PHY4 reg at 1.5 mdio_bus ffe4f1000: Error while reading PHY4 reg at 0.6 sda: sda1 sda2 < sda5 > mdio_bus ffe4f1000: Error while reading PHY4 reg at 0.5 sd 0:0:0:0: [sda] Attached SCSI disk mdio_bus ffe4f1000: MDIO device at address 4 is missing. mdio_bus ffe4f1000: Error while reading PHY0 reg at 1.6 mdio_bus ffe4f1000: Error while reading PHY0 reg at 1.5 mdio_bus ffe4f1000: Error while reading PHY0 reg at 0.6 mdio_bus ffe4f1000: Error while reading PHY0 reg at 0.5 mdio_bus ffe4f1000: MDIO device at address 0 is missing. libphy: Freescale PowerQUICC MII Bus: probed mdio_bus mdio@ffe4e1120: MDIO device at address 8 is missing. libphy: Freescale PowerQUICC MII Bus: probed libphy: Freescale PowerQUICC MII Bus: probed libphy: Freescale PowerQUICC MII Bus: probed libphy: Freescale PowerQUICC MII Bus: probed sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray fsl_dpaa_mac: of_phy_find_device (TBI PHY) failed cdrom: Uniform CD-ROM driver Revision: 3.20 fsl_dpaa_mac ffe4e0000.ethernet: mac_dev->init() = -22 fsl_dpaa_mac: probe of ffe4e0000.ethernet failed with error -22 fsl_dpaa_mac ffe4e2000.ethernet: FMan dTSEC version: 0x08240101 sr 1:0:0:0: Attached scsi generic sg1 type 5 fsl_dpaa_mac ffe4e2000.ethernet: FMan MAC address: 00:15:17:54:a8:b3 fsl_dpaa_mac ffe4e4000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e4000) failed fsl_dpaa_mac: probe of ffe4e4000.ethernet failed with error -22 fsl_dpaa_mac ffe4e6000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e6000) failed fsl_dpaa_mac: probe of ffe4e6000.ethernet failed with error -22 fsl_dpaa_mac ffe4e8000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e8000) failed fsl_dpaa_mac: probe of ffe4e8000.ethernet failed with error -22 fsl_dpaa_mac ffe4f0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@f0000) failed fsl_dpaa_mac: probe of ffe4f0000.ethernet failed with error -22 fsl_dpaa_mac ffe4e2000.ethernet eth0: Probed interface eth0 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. e1000e 2000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 2000:01:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:15:17:54:a8:b2 e1000e 2000:01:00.0 eth1: Intel(R) PRO/1000 Network Connection e1000e 2000:01:00.0 eth1: MAC: 0, PHY: 4, PBA No: D50868-003 e1000e 2000:01:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 2000:01:00.1 eth2: (PCI Express:2.5GT/s:Width x1) 00:15:17:54:a8:b3 e1000e 2000:01:00.1 eth2: Intel(R) PRO/1000 Network Connection e1000e 2000:01:00.1 eth2: MAC: 0, PHY: 4, PBA No: D50868-003 igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ehci-fsl: Freescale EHCI Host controller driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage i2c /dev entries driver mpc-i2c ffe118100.i2c: timeout 1000000 us at24 0-0051: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 0-0052: 32768 byte 24c256 EEPROM, writable, 1 bytes/write mpc-i2c ffe119100.i2c: timeout 1000000 us rtc-ds3232 1-0068: rtc core: registered ds3232 as rtc0 mpc-i2c ffe118000.i2c: timeout 1000000 us mpc-i2c ffe119000.i2c: timeout 1000000 us ina2xx 1-0040: power monitor ina220 (Rshunt = 1000 uOhm) ina2xx 1-0041: power monitor ina220 (Rshunt = 1000 uOhm) ina2xx 1-0044: power monitor ina220 (Rshunt = 1000 uOhm) ina2xx 1-0045: power monitor ina220 (Rshunt = 1000 uOhm) Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software EDAC MC0: Giving out device to module fsl_ddr_edac controller fsl_mc_err: DEV fsl_mc_err (INTERRUPT) fsl_ddr_edac acquired irq 490 for MC fsl_ddr_edac MC err registered EDAC MC1: Giving out device to module fsl_ddr_edac controller fsl_mc_err: DEV fsl_mc_err (INTERRUPT) fsl_ddr_edac acquired irq 489 for MC fsl_ddr_edac MC err registered EDAC PCI0: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.0.auto (INTERRUPT) MPC85xx_edac acquired irq 482 for PCI Err MPC85xx_edac PCI err registered EDAC PCI1: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.1.auto (INTERRUPT) MPC85xx_edac acquired irq 480 for PCI Err MPC85xx_edac PCI err registered sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA iommu: Adding device ffe301000.jr to group 21 iommu: Adding device ffe302000.jr to group 22 iommu: Adding device ffe303000.jr to group 23 iommu: Adding device ffe304000.jr to group 24 platform caam_qi: Linux CAAM Queue I/F driver initialised caam ffe300000.crypto: device ID = 0x0a12010000000000 (Era 3) caam ffe300000.crypto: job rings = 4, qi = 1, dpaa2 = no caam algorithms registered in /proc/crypto platform caam_qi: algorithms registered in /proc/crypto caam_jr ffe301000.jr: registering rng-caam caam ffe300000.crypto: caam pkc algorithms registered in /proc/crypto Freescale hypervisor management driver fsl-hv: no hypervisor found ipip: IPv4 and MPLS over IPv4 tunneling driver Initializing XFRM netlink socket NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Key type dns_resolver registered drmem: No dynamic reconfiguration memory found libphy: mdio_mux: probed libphy: mdio_mux: probed mdio_bus 0.48: MDIO device at address 28 is missing. mdio_bus 0.48: MDIO device at address 29 is missing. mdio_bus 0.48: MDIO device at address 30 is missing. rtc-ds3232 1-0068: setting system clock to 2018-06-19 06:49:28 UTC (1529390968) ALSA device list: No soundcards found. EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 8:1. devtmpfs: mounted Freeing unused kernel memory: 524K This architecture does not have kernel memory protection. systemd[1]: Failed to insert module 'autofs4': No such file or directory random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) systemd[1]: Detected architecture ppc64. Welcome to Debian GNU/Linux stretch/sid! systemd[1]: Set hostname to <p5020ds>. random: systemd: uninitialized urandom read (16 bytes read) random: systemd-cryptse: uninitialized urandom read (16 bytes read) systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ OK ] Listening on Syslog Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Encrypted Volumes. [UNSUPP] Starting of Arbitrary Executable Fi...m Automount Point not supported. [ OK ] Created slice System Slice. Starting hwclockfirst.service... [ OK ] Reached target Slices. Starting Set the console keyboard layout... [ OK ] Created slice system-getty.slice. Mounting RPC Pipe File System... Mounting Debug File System... Mounting POSIX Message Queue File System... Starting Journal Service... Mounting Huge Pages File System... Starting Load Kernel Modules... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. Starting Create Static Device Nodes in /dev... [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. Starting Apply Kernel Variables... [ OK ] Started Journal Service. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted RPC Pipe File System. random: crng init done random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started Set the console keyboard layout. [ OK ] Started udev Kernel Device Manager. [ OK ] Started hwclockfirst.service. Starting Remount Root and Kernel File Systems... EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Set console font and keymap... Starting Raise network interfaces... Starting Preprocess NFS configuration... Starting Load/Save Random Seed... Starting Flush Journal to Persistent Storage... systemd-journald[1527]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Set console font and keymap. [ OK ] Started Preprocess NFS configuration. [ OK ] Started Load/Save Random Seed. [ OK ] Reached target NFS client services. Starting Create Volatile Files and Directories... [ OK ] Started udev Coldplug all Devices. [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... Starting RPC bind portmap service... fsl_dpaa_mac ffe4e2000.ethernet rename3: renamed from eth0 [ OK ] Found device /dev/ttyS0. e1000e 2000:01:00.1 rename5: renamed from eth2 e1000e 2000:01:00.0 eth0: renamed from eth1 fsl_dpaa_mac ffe4e2000.ethernet eth1: renamed from rename3 [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Found device Hitachi_HDS721050CLA362 5. [ OK ] Started Raise network interfaces. [ OK ] Started ifup for eth0. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. Activating swap /dev/disk/by-uuid/3...8-d132-4ebe-80c2-ca8afd64689c... [ OK ] Started RPC bind portmap service. [ OK ] Reached target RPC Port Mapper. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Adding 7918588k swap on /dev/sda5. Priority:-2 extents:1 across:7918588k [ OK ] Activated swap /dev/disk/by-uuid/31de3858-d132-4ebe-80c2-ca8afd64689c. [ OK ] Reached target Swap. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Permit User Sessions... [ OK ] Started Regular background program processing daemon. Starting OpenBSD Secure Shell server... [ OK ] Started Deferred execution scheduler. Starting System Logging Service... Starting Login Service... Starting /etc/rc.local Compatibility... [ OK ] Started Daily apt activities. Starting LSB: exim Mail Transport Agent... [ OK ] Started D-Bus System Message Bus. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. Starting LSB: Start NTP daemon... [ OK ] Started Permit User Sessions. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started System Logging Service. [ OK ] Started Login Service. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started LSB: Start NTP daemon. [ OK ] Started LSB: exim Mail Transport Agent. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Debian GNU/Linux stretch/sid p5020ds ttyS0