On Thu, Aug 30, 2018 at 09:01:16PM +0200, Corentin Labbe wrote:
> R40 have a sata controller which is the same as A20.
> This patch adds a DT node for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-r40.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
> index 852c2ccc3268..d6b5820da850 100644
> --- a/arch/arm/boot/dts/sun8i-r40.dtsi
> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> @@ -550,6 +550,29 @@
> #size-cells = <0>;
> };
>
> + ahci: sata@1c18000 {
> + compatible = "allwinner,sun8i-r40-ahci";
> + reg = <0x01c18000 0x1000>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
> + resets = <&ccu RST_BUS_SATA>;
> + resets-name = "ahci";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> +
> + sata_port: sata-port@0 {
> + reg = <0>;
> + phys = <&sata_phy>;
> + };
> + };
> +
> + sata_phy: sata-phy@1c180c0 {
> + compatible = "allwinner,sun8i-r40-sata-phy";
> + reg = <0x1c180c0 0x200>;
Overlapping devices in the DTS is not ok.
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
