Hello
This patchset add support for allwinner R40 AHCI controller.
This controller need two regulator and one reset which is unsupported
for the moment on ahci_platform.
So this patchset add support for reset and regulator for AHCI
controller.
It add also support for non-target regulator per SATA port.
The whole patchset is tested on sun8i-r40-bananapi-m2-ultra and
on sun7i-a20-cubieboard2 which doesnt have any of the ressources added
by this serie, so no regression should come with it.
Since just before sending this patchset, I discovered the revert of
f0f56716fc3e ("ata: ahci-platform: add reset control support")
I have also tested this serie on a tegra124-jetson-tk1.
Changes since V2
- Moved all ressources management to ahci_platform
Corentin Labbe (9):
ata: ahci_platform: add support for AHCI controller regulator
dt-bindings: ata: ahci-platform: document ahci-supply
ata: ahci_platform: add support for AHCI controller reset
dt-bindings: ata: ahci-platform: document AHCI reset
dt-bindings: ata: ahci-platform: fix indentation of target-supply
ata: ahci_platform: add support for port regulator
dt-bindings: ata: ahci-platform: document port-supply
ARM: dts: sun8i: r40: add sata node
ARM: dts: sun8i: sun8i-r40-bananapi-m2-ultra: enable AHCI
.../devicetree/bindings/ata/ahci-platform.txt | 7 +-
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 21 +++++
arch/arm/boot/dts/sun8i-r40.dtsi | 16 ++++
drivers/ata/ahci.h | 4 +
drivers/ata/libahci_platform.c | 102 ++++++++++++++++++---
5 files changed, 138 insertions(+), 12 deletions(-)
--
2.16.4
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
