Re: [PATCH v3 0/9] ata: ahci_platform: support allwinner R40 AHCI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Corentin,

On Fri, Jul 13, 2018 at 11:02:57AM +0000, Corentin Labbe wrote:
> Hello
> 
> This patchset add support for allwinner R40 AHCI controller.
> 
> This controller need two regulator and one reset which is unsupported
> for the moment on ahci_platform.
> 
> So this patchset add support for reset and regulator for AHCI
> controller.
> It add also support for non-target regulator per SATA port.
> 
> The whole patchset is tested on sun8i-r40-bananapi-m2-ultra and
> on sun7i-a20-cubieboard2 which doesnt have any of the ressources added
> by this serie, so no regression should come with it.

I tested on sun8i-v40-bananapi-m2-berry (with an adapted device
tree).  I got it to work, but only if the U-Boot has support for AHCI
already (from the Banana Pi M2 Ultra support).  With an U-Boot that
hasn't, the system hangs at boot (probably when probing ahci-sunxi). 

Did you test this case on the M2 Ultra board?  (I think SATA should
work the same on both boards, but there may be subtle differences)

Perhaps I did not apply all necessary patches. I took this series and
your minor fixes series for ahci_platform. 
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux