Re: [PATCH v2 1/4] dt-bindings: add binding for Allwinner R40 SATA AHCI controller

[Rob Herring <robh@xxxxxxxxxx>]

On Mon, Jul 09, 2018 at 03:20:55PM +0000, Corentin Labbe wrote:
> From: Icenowy Zheng <icenowy@xxxxxxx>
> 
> The Allwinner R40 SoC contains a SATA AHCI controller like the one in
> A10/A20 SoCs, however a reset control and two power supplies are added
> to it.
> 
> Add a binding document for it.
> 
> As a dedicated binding document is needed now for the A10/A20/R40 AHCI
> controller, drop the A10 compatible line from generic platform AHCI
> controller binding document.
> 
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/ata/ahci-platform.txt      |  1 -
>  .../bindings/ata/allwinner,sun4i-a10-ahci.txt      | 40 ++++++++++++++++++++++
>  2 files changed, 40 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> index c760ecb81381..1bea4b5ef9fd 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> @@ -9,7 +9,6 @@ PHYs.
>  
>  Required properties:
>  - compatible        : compatible string, one of:
> -  - "allwinner,sun4i-a10-ahci"
>    - "brcm,iproc-ahci"
>    - "hisilicon,hisi-ahci"
>    - "cavium,octeon-7130-ahci"
> diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt
> new file mode 100644
> index 000000000000..0eea78c14ad3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt
> @@ -0,0 +1,40 @@
> +Allwinner A10/A20/R40 SoC SATA AHCI Controller
> +
> +Required properties:
> +- compatible        : compatible string, one of:
> +  - "allwinner,sun4i-a10-ahci"
> +  - "allwinner,sun8i-r40-ahci"
> +- interrupts        : the SATA IRQ
> +- reg               : the register mapping
> +- clocks            : the clocks needed by SATA controller, usually contains
> +		      an AHB clock and a mod clock

usually?

Need to specify the order. The examples look reversed of what you have 
here.

> +
> +Optional properties:
> +- target-supply     : regulator for SATA target power
> +
> +Required properties for the following compatibles:
> +  - "allwinner,sun8i-r40-ahci"
> +- resets            : the reset control needed by SATA controller
> +- vdd1v2-supply     : regulator for SATA controller's 1.2V VDD
> +- vdd2v5-supply     : regulator for SATA controller's 2.5V VDD
> +
> +
> +Examples for A10:
> +	ahci: sata@1c18000 {
> +		compatible = "allwinner,sun4i-a10-ahci";
> +		reg = <0x01c18000 0x1000>;
> +		interrupts = <56>;
> +		clocks = <&pll6 0>, <&ahb_gates 25>;
> +		target-supply = <&reg_ahci_5v>;
> +	};
> +
> +Examples for R40:
> +	ahci: sata@1c18000 {
> +		compatible = "allwinner,sun8i-r40-ahci";
> +		reg = <0x01c18000 0x1000>;
> +		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&ccu CLK_SATA>, <&ccu CLK_BUS_SATA>;
> +		resets = <&ccu RST_BUS_SATA>;
> +		vdd1v2-supply = <&reg_eldo3>;
> +		vdd2v5-supply = <&reg_dldo4>;
> +	};
> -- 
> 2.16.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html